Question about 1996 Pontiac Firebird

1 Answer

All my spark plug wires are off of the engine and off of the coils i need to no wat wire gos on what spark plug coming off the coils

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 835 Answers

What engine so you get the rite way

Posted on Nov 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to do a spark plug change on a 2003 Jeep Liberty


how to move hands, ?
what tools
im i to guess this is your first spark plug pull even on a lawn-mower?

what engine do you have, 90% posts lack what engine it is on a engine question, and we are still guessing, and nuttn happens.
lets see.you pull HV wires 1 by 1, and replace them using a spark plug socket wrench.
if the engine has COP coils, those come off, first, (do tell got cops)>?

do not mix up the spark wires or it will not run.
why not watch youtube of 10000 doing this on all engines. to get a fell of the ways and means.... simple huh?
only start a spark plug by hand , never use a wrench.
rule1. end.
do not over tighten them (rule 2)

2.4L engine, 4 cylinder??????
this is my guess.
JEEP KJ
ill look that up for you.
ok i looked, the 2.4L uses coil pack
so rule 1 applies, DO NOT MIX the HV wires on the COIL PACK>
remove the spark plug wire from ONE spark plug]
remove the spark plug (turns counter clock wise)
put in new plug (right part number and gap it to spec.
torque it to spec, and put back the wire.
move to next plug wire and repeat.
success.

HV means those high voltage spark wires, that make you glow like a June bug if you get HIT. the 50,000 volt wires.

RE14MCC5 (Champion #) plugs
48 thou gap
but the hood sticker wins this ... not me.... read it.

the 3.7 has 6 cop coils , no signal coil pack.
my 3.8L has coil packs.
so as you can see , each engine is unique, by year and car.

May 06, 2015 | Jeep Cars & Trucks

1 Answer

Engine not firing on # 3 cylinder


Spark plug or coil likely problem. Might put a spark plug in the #3 wire and crank it over and see if it sparks. Plug will need to be grounded and someone to watch or crank engine for you. Leave original plug in hole while doing this. If you have a timing light. Attach it to the wire with it plugged to the original spark plug and start engine. If the light flashes the the coil and wire has power. If no light then more likely a coil. Depends on year of auto as well. Most of the newer ones have a coil for each plug. If its a older one... likely a plug or plug wire.

Dec 06, 2013 | Nissan Cars & Trucks

1 Answer

Trying to figure out what the name of a part is


That would be the ignition coil, the part that creates spark at the spark plug. If you follow the electrical path from the coil wire to the distributor cap, and from there, the spinning rotor just under the distributor cap carries the path from the coil wire at the cap's center to the spark plug wires around the dist. cap, and through the plug wire to the spark plug.
The high voltage causing the spark is created in the ignition coil by the engine computer at the precise right moment signaling an ignition module to cut 12 volts current to the ignition coil. This causes the coil to internally build up high voltage which is passed through the coil to distributor cap wire. The computer knows the precise right moment to initiate spark from engine sensors, primarily the crank position sensor and the cam position sensor.

Nov 06, 2012 | 1999 Dodge Durango

1 Answer

Engine light on. went to auto parts store, they diagnosed number 2 or 3 cylinder not firing. prior to this i changed plugs and wires. then i changed the coil. the engine light went off and the gas economy...


Hello mikew564.The first diagnosis was number 2 or 3 cylinder not firing. Once you changed the coil, the check engine light went off. When the light came back on again, did you get it diagnosed again to find out if the problem was the same?... 2 or 3 cylinder not firing????

First of all, there is NO extra wire/ground on the coil/ignition wiring (see images below). The spark plugs and ignition plug wiring can be checked for arcing, corrosion, resistance and can be checked for cracks in the insulators or worn electrodes (and spark gap) by a competent mechanic.
If you are having the same issue (2 - 3 misfire), there are several techniques for eliminating the plug wires or spark plugs. Spray water on the plug wires to see if they are arcing. Swap plugs from cylinders 2 & 3 with cylinders 1 & 4. If you still have a 2-3 misfire, check/inspect/examine the coil connector pins & coil harness to the coil(s) themselves.

ghost45_20.jpg

ghost45_21.jpg

Aug 27, 2011 | 2004 Hyundai Elantra

1 Answer

Describe your how fix my pontiac 2000 montana Problem changing spark plugs



Inspection

Inspect for the correct routing of the spark plug wires. Improper routing may cause cross-firing. Inspect each wire for any signs of cranks or splits in the wire. Inspect each plug wire boot for tearing, piercing, arcing, carbon tracking or a corroded terminal.
If there is any corrosion, carbon tracking or arcing indicated on a plug wire boot or terminal, both the plug wire and component it was connected to should be replaced.


Removal & Installation

3.5L Engine

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove the left side spark plug wires from the spark plugs.
  3. Remove the left side plug wires from the retaining clips.
  4. Rotate the engine for access as follows:
    1. Set the parking brake.
    2. Shift the transaxle into neutral.
    3. Remove the engine mount strut bolts. Swing the engine mount struts aside.
    4. Install the Engine Tilt Strap J-41131.
    5. Pull on the engine in order to rotate the engine forward.
    6. Tighten the strap.

  5. Remove the right side spark plug wires from the spark plugs.
  6. Remove the plug wires from the retaining clip.
  7. Remove the spark wires from the ignition coils.
  8. Remove the plug wire assembly from the engine.
    NOTE If you are replacing the spark plug wires, the spark plug wire conduit and retaining clips should be transferred to the replacement wires.

To install:
  1. Install the right side plug wires to the ignition coils and then the spark plugs.
  2. Install the spark plug wires to the retaining clip.
  3. Rotate the engine back to the original position.
  4. Install the left side spark plug wires to the ignition coils and then to the spark plugs.
  5. Install the spark plug wires to the retaining clips.

3.9L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove the intake manifold cover.
  3. Remove the left side spark plug wires as follows:
    1. Disconnect the left side spark plug wires from the spark plugs.
    2. Disconnect the left side spark plug wires from the ignition coil.
    3. Remove the left side spark plug wire clips from the intake manifold and heater inlet and outlet pipe.
    4. Remove the left side spark plug wire assembly.

  4. If removing the right side spark plug wires, the engine must be rotated for access as follows:
    1. Set the parking brake.
    2. Shift the transaxle into neutral.
    3. Remove the engine mount strut bolts. Swing the engine mount struts aside.
    4. Install the Engine Tilt Strap J-41131.
    5. Pull on the engine in order to rotate the engine forward.
    6. Tighten the strap.

  5. After rotating the engine, remove the right side spark plug wires as follows:
    1. Disconnect the right side spark plug wires from the spark plugs and ignition coil.

  6. Remove the right side spark plug wire clip from the ignition coil bracket.
  7. Remove the right side spark plug wire assembly.

To install:
  1. Install the spark plug wire assembly.
  2. Install the right side spark plug wire clip at the ignition coil bracket.
  3. Connect the plug wires to the ignition coil and spark plugs.
  4. If the engine was rotated for access, return the engine to the original position.
  5. The remainder of the installation is the reverse order of removal.

Feb 05, 2011 | 2000 Pontiac Montana

1 Answer

2004 audi a4 1.8 t misfiring flt code p0301 changed coils spark plug still showing code for cyl 1


try find out on the internet wats the problem with that code but take out the spark plug out of no 1 cilinder conected to the coil and turn over the engine and u will see if the spark plug will spark or not if is not sparking and the spark plugs and the coils are new may be from a wire or loose conection

Jan 12, 2011 | 2002 Audi A4

2 Answers

How do I replace the ignition coil in my 2002 ford taurus



Removal & Installation

3.0L (VIN S) Engine

  1. Disconnect the negative battery cable.
  2. Unplug the engine control sensor wiring connectors from the ignition coil and the radio ignition interference capacitor.
  3. Tag and disconnect the spark plug wires from the coil by squeezing the locking tabs, then twist the tab and pull upwards.
  4. Unfasten the four ignition coil retainers and remove the coil and the coil ground wire the radio ignition interference capacitor. Save the capacitor and coil ground wire for re-installation of the coil assembly.
  5. Wipe the coil towers with a clean cloth dampened with soap and water. Remove any soap film and dry with compressed air. Inspect the coil for cracks, carbon tracking, dirt or damage and replace as necessary.

    0996b43f802333d8.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Ignition coil assembly mounting-3.0L DOHC engines


To install:
  1. Place the coil, capacitor and the coil ground wire onto its mounting location on the right hand valve cover.
  2. Install the coil assembly retainers and tighten to 45-61 inch lbs. (5-7 Nm)..
  3. Apply dielectric compound D7AZ-19A331-A or its equivalent to the spark plug wire boots.
  4. Attach the spark plug wires to their proper terminals on the coil and make sure the boots are firmly seated so that the locking tabs engage.
  5. Attach the engine control wiring connectors to the ignition coil and the radio ignition interference capacitor.
  6. Connect the negative battery cable, start the vehicle and check for proper operation.

Dec 19, 2010 | 2002 Ford Taurus

1 Answer

I need the diagram to put the spark plug cables


2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
Spark Plug Wires - Removal & Installation

3.5L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
  2. Remove the intake manifold cover, if required.
  3. Disconnect the left side spark plug wires from the spark plugs.
  4. Disconnect the left side spark plug wires from the ignition coil.
  5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
  6. Remove the spark plug wire assembly.
  7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
  8. Disconnect the right side spark plug wires from the spark plugs.
  9. Disconnect the right side spark plugs from the ignition coils.
  10. Remove the spark plug wire assembly.
  11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
To install:
  1. Install the spark plug wire assembly.
  2. Connect the right side spark plugs to the ignition coils.
  3. Connect the right side spark plug wires to the spark plugs.
  4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
  5. Install the spark plug wire assembly.
  6. Connect the left side spark plug wires to the spark plugs.
  7. Connect the left side spark plug wires to the ignition coil.
  8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
  9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
  10. Install the intake manifold cover, if required.

Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
74d742b.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
306b531.jpg


Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
9313fa7.jpg


Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
2c9af72.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
d929c16.jpg


Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
f357cd3.jpg

Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
09e9db9.jpg

I really hope help you with this (remember rated this help) Good luck.

Sep 23, 2009 | 2003 Chevrolet Malibu

1 Answer

Do not know where spark plugs are located in motor


the spark plugs wires are directly located on top of the engine and the spark plugs are down inside the holes in the valve cover itself. I believe there are also 2 coils on top of the engine, which hide two of the spark plug wires which are attached directly to the underside of each coil, remove the coil pull it upward carefully and you will find the spark plugs for those two in the hole underneath the coil for each one. If you decide to replace the plugs, make sure to check the spark plug gap even if they tell you they are pre-gapped as pre-gapped spark plugs are usually gapped for more than one particular car and it may be incorrectly gapped for your specific vehicle. If you decide to also replace the spark plug wires, you will have to purchase the spark plug wires for the underside of each coil seperately because most local auto parts stores only sell 2 spark plug wires in the set that go onto the non-coil attached wires and plugs, and you have to purchase the coil spark plug wires seperately. So all in all you should have 4 spark plug wires, 2 that attach directly underneath the 2 coils, then 2 regular type wires that run to the other spark plugs. If you look at the valve cover and see the wires, you will see what i am saying better. Just don't forget to ask the autoparts store the spark plug gap recommended for you car, and adjust the gap on the plugs as needed. good luck.
Bren H.

Sep 19, 2008 | 2000 Mitsubishi Mirage

2 Answers

Keeps mis-firing on cylinder #3 check engine light flashes and stays on car chugs on uphill slopes


check plugs wires for damage or just replace if you have replaced the #3 plug already if not replace it also

Aug 04, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
1996 Pontiac Firebird Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...