Question about 1998 Toyota Sienna

1 Answer

I could also use the 98 Sienna Driver side view mirror replacement instructions. Thanks in advance. Bob at rblee@shaw.ca

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 365 Answers

Behind the mirror on the inside of the door there will be a triangular shape piece of plastic, gently pry the plastic from the door, now that it is removed you will see a multi electrical plug for the mirror if you have electric mirrors, seperate the plug.
look in the small holes in the door where the plastic cover was removed and you should see 2 or 3 bolt heads, remove those bolts and the mirror should now be free to remove from the vehicle.
Replace the new mirror in reverse order of removal.

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How To Install Replace Side Rear View Mirror Mercury Grand Marquis 98-11...


How To Install Replace Side Rear View Mirror Mercury Grand Marquis 98-11 1AAuto.com

on May 18, 2012 | 1998 Mercury Grand Marquis

1 Answer

2000 toyota Sienna side view mirror broken/loose, folds back at speeds greater than about 40mph, replacement or repair instructions would be greatly appreciated.


the spring is probably unhooked or broken. take the panel on the inside of the door right behind the mirror off and there is probably two bolts after that its pretty much self explainatory

Aug 31, 2012 | 2000 Toyota Sienna

1 Answer

How do you replace 2008 toyota sienna RH side mirror


Call the dealer to see if the glass element can be replaced, most can.

Aug 17, 2012 | 2008 Toyota Sienna

1 Answer

How do you replace the driver side rear view mirror on a 2007 Toyota Sienna?


Once you've purchased a replacement mirror glass based on your specific make, model and year simply follow the steps below:

  • Remove all existing glass from the mirror head's plastic inner platform (backing plate).
  • Clean backing plate with rubbing alcohol. Clean back of replacement mirror with Burco Window Glo® or other glass cleaner.
  • Apply the Burco Redi Stick® adhesive patches and or silicone/urethane to the replacement mirror's back or to the backing plate itself.
  • Align and press replacement mirror to the backing plate.
  • Clean the installed Burco Redi Cuts® mirror with Burco Window Glo® or other urethane-safe glass cleaner.

Aug 04, 2009 | Toyota Sienna Cars & Trucks

1 Answer

Driver side mirror needs replacement.


take off blk panel cover inside where mirror attach and u see three screws if cant get to them pull off door panel

Jul 01, 2009 | 1998 Toyota Sienna

1 Answer

Replace driver side mirror on 2001 Nissan Quest


SECTION 501-09: Rear View Mirrors 2001 Villager Workshop Manual REMOVAL AND INSTALLATION Mirror —Exterior Rear View Removal
  1. Remove the front door trim panel. For additional information, refer to Section 501-05 .
  1. Remove the upper speaker.
    1. Disconnect the electrical connector.
    1. Remove the bolts.
    1. Remove the speaker.
  1. Position the watershield aside.
  1. Remove the exterior rear view mirror access panel.
  1. Disconnect the exterior rear view mirror electrical connectors.
    • Release the wiring harness locator.
  1. Remove the exterior rear view mirror.
    • Remove the bolts.
    • Feed the wiring harness through the door opening.

Mar 31, 2009 | 2001 Nissan Quest

1 Answer

I need to replace 98 Sienna passenger side view mirror, will you have more instruction. Could you mail me at schern7@cox.net


I have e-mailed you the procedure to the address that you have provided. Look for a message from fixya_toyota_ed @ yahoo.com.

Thanks for choosing FixYa for assistance.

Jan 24, 2009 | 2001 Toyota Sienna

1 Answer

98 Sienna Driver side view mirror replacement


I have sent you the instructions to the address you provided. Thanks for choosing FixYa for assistance!

Jan 19, 2009 | 1998 Toyota Sienna

3 Answers

Replacing RH Side view mirror on a 2006 Toyota Sienna


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jul 29, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
1998 Toyota Sienna Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...