Question about 1995 Buick Regal

1 Answer

Stop lites out but stop lite in back window works. Blinkers and hazard work. The fuse box contents do not match the fuse box diagram. Only think I noticed is that the ABS light does not come on at all since I have no stop lites. Someone said there are two circuits in the brake pedal switch. Is this correct? I checked all bulbs and fuses. I would really like to double check the ABS fuse before I have the switch checked and replaced.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 547 Answers

An easy way to test the switch is to jumper the wires together. If the brake lights come on you know the switch is bad. If not, then you have to look elsewhere in the system to solve the problem.

Posted on Nov 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I changed the main relay/ fuse on my 1999 ford escort sport zx2 and I still have the same problem. My brake lights, blinkers, radio, interior lights and locks do not work. What do I do now?


https://s9.postimg.org/cukz9jgv3/turn_brake.jpg

Click on the link
At the moment, I'm talking about turn signal and brake lites.
As far as brake lites, does the high mount brake lite work? If not, did it go out at the same time as the lower brake lites? The reason I ask, while both high mount and lower brake lamps get voltage from the same fuse, but, are wired differently. Did you check the fuse and check for voltage on fuse circuit using a test lite, hot all the time. You can also check the fuse above turn signal switch, that fuse circuit goes hot with the key on. As you can see the turn and lower brake voltage is wired through that flasher. I can't rule out a problem with flasher?

Jul 09, 2017 | Ford Cars & Trucks

2 Answers

Which fuse controls the cruise control? If not the fuse what else could cause the problem?


the IPM -- refers to the integrated power module under hood (fuse box) Fuse #36




25661612-sinuhqnwkyunxx3smtti0pjv-1-0.gif

Apr 23, 2015 | 2006 Dodge Dakota

1 Answer

1998 Dodge Dakota blinkers stop working changed flasher now brake lights, blinkers, and hazard lights will not work.


Follow the flasher wiring to fuse box and locate the fusible link. Looks just like the wire but softer exterior and it's a fuse able wire that can break down. Should be along the driver fender under hood.

Sep 09, 2014 | 1998 Dodge Dakota

1 Answer

I have 2002 camaro , the 4 way lites work , head lites an tail lites work passenger blinkers work but when i turn on drivers side blinkers the only thing that happens is it lites up on the cluster panel


This means that either your front or rear blinker light on your drivers sides is not working. Activate your hazards by pulling up on the knob on your steering column labeled by the orange "hazard" cone insignia.
Then check to see if either the front or the rear driver-side blinker is not working. This one will need to be replaced for both of them to work correctly.

Feb 17, 2011 | 2002 Chevrolet Camaro

1 Answer

1999 chevy pickup, no bed brake lights. 3rd cab brake light works. blinkers , hazards, taillights all work


Hi, the likely problem is your VEH STOP fuse. in the engine compartment fuse box. Please let me know if you have questions and thanks for using FixYa.


jturcotte_626.gif

Dec 27, 2010 | 1999 Chevrolet Silverado 1500

3 Answers

I got the fuse diagram from the internet for my 1998 ford explorer sport and when I checked out my fuses I noticed that the amps on the diagram didn't match what I had in my fuse box. Would that make me...


Find this out by placing a amp gage between your battery + post and the battery + cable (disconnect it). Start pulling out fuses until you see the .085 drainage stop.

Mar 10, 2010 | Ford Explorer Sport Cars & Trucks

1 Answer

Need a fuse box diagram for 1999 dodge intrepid


buy yourself a fuse tester and remove each fuse and test individually,they are only a couple of bucks and wont go to waste

Feb 14, 2010 | 1999 Dodge Intrepid

1 Answer

Left/Right Directionals don't work.


If they light, but don't blink, it's the relay. Check fuse box for round flasher relay. Hit your hazard flasher to make sure you pull out the right one. If you pull the relay and the hazards stop working, they you pulled the wrong one.

Apr 11, 2009 | 2000 Jeep Cherokee

1 Answer

Brake lights


This is a good possability, test the brake lite switch to see if you have power coming out when the brake is applied. if you do then you will need o trace the wiring back to the lite socket ( pig tail ). Good luck and remember to rate all replies you get. Thanx.

Oct 27, 2008 | 2004 Chevrolet Cavalier

1 Answer

I have a chevy Silverado with a tow hitch package. I'm try ing to wire in a new hitch because the last one got smashed, I can isolate the right and left blinkers and the brake lights, but on a 4 slot flat...


I can't look up your wiring diagram because I don't know model year?
On some makes and models, the lower brake lites are wired through the multifunction switch. Your turn and stop use the same bulb filament, just not at the same time. On a left turn, the left turn signal works, but the brake lite on the left doesn't. Now, the brake lamp on the right does work. The high mount brake lite also will work. The highmount brake lite is usually wired differently than the lower brake lites.
W/o being able to look at wiring diagram, I don't know if my info is applicable on your vehicle? I need model year.

May 05, 2017 | Chevrolet Silverado 1500 Cars & Trucks

Not finding what you are looking for?
1995 Buick Regal Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...