Question about 2004 Isuzu Rodeo

Open Question

Check engine light p1350 code - 2004 Isuzu Rodeo

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have a 99 cadillac deville that will shift fine when you first take off but after you stop will not shift pass second gear. If you stop completely and put it in park it will shift through all the gears...

The powertrain control module (PCM) doesn't like the information it is getting from the ignition control module (ICM), and the PCM controls shifting, traction control, etc.If these are the only codes you are getting and the car moves, then you could assume the sensors connected to the ICM are working properly. That leaves why the PCM thinks there is a problem. I would certainly replace the ICM first, and then if the problem still exists, the PCM.

Feb 26, 2015 | 1999 Cadillac DeVille

1 Answer

How can i fix my p1350 problem?

ok this is a problem with in the icm after checking the wire harness you ma have to change the icm that is located under the coil pack

Apr 25, 2014 | 2006 Pontiac Grand Prix GT

2 Answers


Probably needs a new coil pack

Apr 25, 2014 | 2006 Pontiac Grand Prix

1 Answer

Code p0172,p0175, p1348,p1350

sell it to highest bider

Feb 02, 2014 | 2004 Isuzu Rodeo

1 Answer

Still has codes p1323 p1350 p0135

P1323 Is a code for ICM 24X Reference circuit low frequency.
P1350 Is fuel level sensor B intermittent
P0135 Is O2 hearer circuit malfunction. (Bank 1 sensor 1)
Is this car a cadillac or GM vehicle? Usually this code appear P1323 from poor mating connection or intermittent female to male connection inspect the connection the spade could of spreaded out. P1323 the choice tool is a volt meter you need to check the circuit for 12 volt hust because you installed a 02 doesnt mean you made the fix open the wire harness and inspect for wire that has rubbed through now depending on the year make and model which I dont know of the heater circuit can be fused so you need to check the engine fuse junction box and check the heater circuit fuse if it has any. As for the fuel lever circuit again intermittent connection check the connections

Feb 26, 2012 | Cars & Trucks

1 Answer

Lexus 1998 (124K miles) has error P1350 VVT sensor on bank 2

code is VVT sensor circuit malfunction (bank 2)
here is link to code site

Feb 10, 2010 | 1998 Lexus LS 400

2 Answers

Check engine light is on, 2005 impala ss

The P1350 code on your car is described as Ignition Control (IC) System Fault Conditions. Have you checked your stock coils with a voltmeter? You know I've seen "aftermarket" parts fail pretty quickly. In many cases, OEM replacement parts have the quality you need to have a reliable car. Not all the time, but in some cases. In addition to posting here you might also want to post your question at Good luck!

Feb 12, 2009 | 2005 Chevrolet Impala

1 Answer

P1350 trouble code 740i bmw

p1350 trouble code is a misfire code during start on cyclinder 5. this problem could be computer problem or an engine problem. cylinder codes aren't easy d-i-y jobs so the best solution i can think of is taking to to a bmw certified mechanic

Jun 20, 2008 | 2000 BMW 7 Series

Not finding what you are looking for?
2004 Isuzu Rodeo Logo

Related Topics:

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14381 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides