Question about Mercedes-Benz CL550

1 Answer

Cl550 beautiful car design the activators in the dash make noise at low rpms

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,427 Answers

Well I think I know what the problem is and it isnt the dash, or anything in the dash, These vehicles quite often breaks engine mountain rubbers, causing the car to vibrate and you seem to get it from the dash. the problem increases when you turn the ac on as well..

To verify my claims

have some one sit it car,
pop the hood,
look at the engine while someone start (the engine will rise and fall)

put car in neutral, press brake and accelerate half , Engine will kick back.. and fall

with foot on brake , place id drive gear ,, engine will rise, place in reverse engine will kick back..

If you get 1 or more of the above its a broken engine mount and the cause of your stress.. Have a mechanic change it as its not something you should attempt on your own,, unless you know what your doing then feel free,..

Posted on Nov 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chrysler sebring low oil pressure at idle


It may be the oil pump. If the gauge is going up when the rpms increase it's probably not the gauge or pressure switch. If the computer senses the oil pressure is low it will shut the vehicle off to try to save it's self from catastrophic failure. Also it may start cranking longer before starting. Thats it building oil pressure before the computer will let it start. Make sure oil is full, clean & thick.

Nov 05, 2012 | 1999 Chrysler Sebring

1 Answer

Low oil pressure indicator at low rpms (idle) '97 olds V8


Low pressure when at idle, after the engine has warmed up and the oil has thinned, indicates that the oil pump is worn and needs to be replaced.

Jul 07, 2008 | 1997 Oldsmobile Aurora

1 Answer

95 saturn 1.9 loud engine noise when idle or low rpms


Is it a clicking, Clacking, or clunking noise.?

Nov 03, 2012 | Cars & Trucks

1 Answer

I have a 07 cl550 its making a noise from the back wheel I just got the brakes change


What can be wrong will be indicated by the type of noise. However since you just got it serviced we can be pretty sure it is related. Usually it will just be something not tight or wasn't fitted properly. I would take it back to the shop and ask them to check. They should have no problem with chexking it and xorrecting what it wrong ie a loose bolt etc. While most shops try to do perfect work even the best ones have a oops now and then. Anyway get it checked before it

Apr 30, 2012 | 2007 Mercedes-Benz CL550 Coupe

1 Answer

Low oil pressure at low rpms


Depending on tone and depth of "clicking" it could be anything from lifters to connecting rods or piston pins....

cheapest to expensive:

Replace oil filter

if that doesn't do it (which it doesn't sound like it),

Replace engine...

Because clicking/ticking/clunking noises while having a "low oil pressure" issue (most of the time) means the engine is destroying itself.

Apr 14, 2012 | Cars & Trucks

1 Answer

2001 GMC safari engine noise- sounds low, like spun rod bearing. BUT.... seems actually QUIETER under a load. NOISIER at idle. Oil pressure is low at idle. I was trying to do a "relearn...


not a bearing problem as they get noisier under load or rpms , not quieter
oil pressure always drops around 10% of full pressure at idle more if the oil is of low viscosity ( 5w10 or 15) use a mechanic stethoscope to determine noise source at idle

Apr 18, 2017 | 2001 GMC Safari

1 Answer

Engine makes knocking noise at low rpms and quiets as rpms are raised. what is the problem


IS IT SUPER CHARGED ?
TRY REMOVING DRIVE BELT(S) AND ONLY BRIEFLY RUN TO SEE IF NOISE
GOES AWAY 2 BELTS ON S/C ENGINE AND ONLY 1 ON REGULAR ENGINE

Dec 09, 2010 | 2003 Pontiac Bonneville

1 Answer

2000 Lincoln Navigator Stalling at low RPMS sporadically


Idle Air Control (IAC) motor is sticking.You can try taking it off and cleaning it but most likely will have to replace it.

Feb 12, 2009 | 2004 Lincoln Navigator

2 Answers

Discount offered


Depends on the state you buy in. I got my car (2008 CL550) from NJ, and got it at invoice price. The car is stocked with the following packages (black and black interiors): - AMG Package - Premium II - Distronic Plus - Heated stearing - Ipod integration The MSRP for this package was $120,080; I got the car for $112,000. Had to pay NJ taxes on top of that price though :-(

May 14, 2008 | 2007 Mercedes-Benz CL550 Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...