Cars & Trucks Logo

Related Topics:

Posted on Nov 11, 2010
Be the first to answer

The top bolt of the right front motor mount is missing in my 1992 Ford Taurus V6 3.0 and I need to know what size of bolt goes in it so I can go buy a replacement one.

Answer This Question

5 Related Answers

Anonymous

  • 24 Answers
  • Posted on Apr 14, 2009

SOURCE: i need to know what size the motor mount bolt are on a eclipse

02886E MB309345 front motor mount to centermember bolt Go to: http://www.2gnt.com/CAPS/main0sub0.html Then click: Engine(Upper Left hand corner) Then Click: Engine Mounting and Support(Lower Right hand corner) Then click the corresponding part you need(to verify). Give that part number to your local Dealer and they can order that part for you.

Ad

Anonymous

  • 35 Answers
  • Posted on Jul 12, 2009

SOURCE: what size allen bolts are on the front brake

I think they are a t30 Not sure exactly, But ask the auto parts guy at the store he will be able to tell you exactly

motor1258

Mike Butler

  • 6674 Answers
  • Posted on Aug 06, 2009

SOURCE: i have broken motor mount in my 1999 ford taurus.

Here's a link that may help you.

http://www.ford-forums.com/ford-taurus/24601-taurus-sable-transmission-removal-should-help-4.html

Anonymous

  • 161 Answers
  • Posted on Oct 09, 2009

SOURCE: 1992 Ford taurus 3.0 l

have the timing checked.

Anonymous

  • 1 Answer
  • Posted on Mar 11, 2010

SOURCE: 1992 Ford Taurus with a 3.8l V6 the cooling fan

The Taurus has Two temp sensors. One for the dash, which is isolated, then one for the PCM, it also controls when the fan relay should actuate. Its a 2 wire sensor, just above the thermostat. If you remove the harness from that sensor, and the cooling fan comes on, at any temp, (should take 5- 10 seconds) then thats your fault.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Iam no mech but is it hard 2 change the motor n transmission mounts in a 96 ford thunderbird 3.8 engine if it is whats the going price 2 do so i dont get taken
It is fairly easy to do if you have a lift, but it is possible to do on the ground with a jack and jack stands. You will need to be able to unbolt both sides of the mount and support the engine with the jack while you replace the mounts. If you download the autozone app to a smart pone or tablet it will give you a repair estimate calculator,
Read full answer
Mar 09, 2018 • Ford Cars & Trucks
0helpful
1answer

Removal of front bumper 1992 ford taurus
Simple and easy,
Buy the bumper cover new or cheep at junk yard your choice.
How to remove the broken/old bumper by first removing both head lights.
Then remove all plastic clips, yes you can just brake them off there cheep to buy at any auto store.
Then remove all main bolts from the top and underneath.
Then put new bumper on and reverse the steps.
Read full answer
Jul 08, 2012 • 1992 Ford Taurus
0helpful
1answer

How to chg alternator on 2002 ford taurus 24v dohc 3.0
ctionsThings You'll Need
  • Flywheel holding tool
  • New alternator
  • Socket wrench set
  • Torque wrench
    • 1Determine which alternator your Ford Taurus will need. You'll want to be sure the new alternator is compatible with your Taurus's engine. Models made from 1986 to 1991 have a 2.5 L HSC, 3.0 L Vulcan or 3.8 L engine. The 2.5 L engine was dropped for 1992 to 1995 models, and post-1995 models will have a 3.0 L engine.
    • 2Disconnect the negative battery cable with a socket wrench. Release the tension on the accessory drive belt so that you can remove the drive belt from the pulley.
    • 3Take off the mounting bolt on the right side of the alternator with a socket wrench and remove the bracket for the power steering hose. Remove the mounting bolts on top of the alternator, the front passenger wheel and tire assembly and the front fender splash shield. Remove the alternator splash shield with a socket wrench and take off the inspection cover for the torque converter.
    • 4Mount a tool to hold the flywheel so you can remove the crankshaft pulley bolt and crankshaft pulley. Lower the alternator so you can unplug its electrical connections. Disconnect the crankshaft position sensor and Oxygen sensor connector. Remove the lower alternator mounting bolt and B+ connector nut to remove the alternator.
    • 5Install the new alternator assembly by reversing the above procedure. Use a torque wrench to tighten the B+ connector nut to 71 in. lbs. and the lower alternator bolt to 18 foot pounds. Torque the crankshaft pulley bolt to 74. foot pounds, the upper alternator bolts to 18 foot pounds and the nut for the power steering hose bracket to 13 foot pounds.


Read more: How to Replace the Alternator in a Ford Taurus ' eHow.com http://www.ehow.com/how_4506222_replace-alternator-ford-taurus.html#ixzz1ZdgFklse
Read full answer
Oct 01, 2011 • 2002 Ford Taurus
0helpful
1answer

I need to replace the existing starter in my 2003 Ford Taurus wagon. I know that I have to jack the car up in order to remove the old starter. What I don't know, is how many bolts need to be removed...
Because of the Variety of mounting methods there are 2 to 4 bolts that should be visible as you look at the starter itself. Not counting the wiring connections. If this a sideways mounted motor with the Starter mounted on the front of the motor there will be 2 bolts holding it in place. If the motor is mounted regularly with the transmission extending under the vehicle the starter in on the rear of the motor near the firewall and will have up to 4 bolts holding it in place but most likely no more than 3. I would recommend getting a Haynes repair manual on the vehicle for more detailed instruction on removal and installation. This manual or a Chilton's manual are both available at the major Auto Parts stores and are fairly inexpensive.
Read full answer
Aug 28, 2010 • 2003 Ford Taurus
1helpful
1answer

1992 Ford taurus 3.0 l engine. Engine jumped due to front motor mount missing a mounting bolt. Since then when engine starts the engine runs at what sounds like full throttle. Replaced TPS the engine...
have the timing checked.
Read full answer
Sep 28, 2009 • Ford Taurus Cars & Trucks
0helpful
1answer

Center main mototr mount bolt is missing,need size of bolt so I can replace it myself.
More than likely the mount is bad and you will have to buy the bolt from the dealer or a fabricating shop that sells metric bolts, or go to a junk yard to get a replacement for same car. pull the nut off the other side and measure from the top of the bolt to the end of the threads then go buy one at the store using the nut as your size guide and thread pitch and get a grade 8 bolt to replace it with.
Read full answer
May 31, 2009 • 1993 Toyota Camry V6
3helpful
1answer

Engine mount replacement
There are two liquid filled and a trans mount. You need to found out which way the motor jumps if it jumps back to the fire wall I would change the two liquid fill. They are located looking at the engine on the pulley side left and right bolted to A-frame you can change one at a time. Unbolt one and jack motor with a floor jack and board just lift enough to drop it in and out. It's tough I know I did it before but it can be done. And do the same for the other. Trans mounted one never needs replaced. Just make sure the mounts are bad cause front wheel drive motors usally move but if its moving more than 2"-4" then replace them.
Read full answer
Apr 24, 2009 • 1994 Ford Taurus
0helpful
2answers

My right subframe would go up when gas is pushed and it shifted hard and i just got a rebuild trns done i changed bot front and back motor mount it helped a lil but my subframe still moves up when i put it...
1. subframe mounts.
2. subframe bolts or nut welded to body broken
3. Body rotted out.
Ford has a bulliten and a retrofit kit to fix this issue.Its a pain in the *** you need to pull up the carpet and drill holes and stuff, I did one way back in the day. Took like 2-3 hours but fixed it. I live in minnesota the road salt eats cars up something fierce!!
Read full answer
Apr 24, 2009 • 1996 Ford Taurus
0helpful
1answer

Front motor mount
Place a block under motor, jack the motor up until you have clearance to remove top bolt.
Read full answer
Jul 24, 2008 • 1993 Ford Taurus
Not finding what you are looking for?

View Most Popular

Cars & Trucks

Related Question

Iam no mech but is it hard 2 change the motor n transmission mounts in a 96 ford thunderbird 3.8 engine if it is whats the going price 2 do so i dont get taken

  • Ford Cars & Trucks

103 views

Ask a Question

Usually answered in minutes!

Popular Questions

Diagram of fuse box 2000

2000 Ford Taurus

2005 ford taurus fuse box diagrams

2005 Ford Taurus

Fuse box diagram for 2002 ford taurus

2002 Ford Taurus

I turn key and starter spin but will not engage flywheel.

2005 Ford Taurus

Serpentine belt diagram 2002 ford taurus 3.0

2002 Ford Taurus

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
2002 Taurus manual and electrical...

2002 Ford Taurus

PDF Manual
Mpdf.pdf. user-manual-1995 Taurus...

1995 Ford Taurus

PDF Manual
98tauog1e.pdf. user-manual-1998 Taurus...

1998 Ford Taurus

Loading...