Question about 1998 Honda Prelude

1 Answer

I got the code p1361 on my HONDA, PRELUDE, 2000. Its mean TDC intermittent connection.... On h22a4 like me... the TDC and CKP connect in 1 connector. I check the connector restistance.... perfect... i check for the resistance in the connector to ECM and my CKP is good with 2.0 but the TDC no resistance but the normal is 1 - 3.2... for twice... is it a poor connection wire , broken wire.... starting the connector to ecm?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 5,763 Answers

Heres adiagram to check resistance of the sensor, it should be1200-1300 ohms, but take note the sensor could read good at this time this problem is intermitent and the sensor may be bad, check for continuty at the computer connector , if all wires are good then i would replace the crankshaft sensor/top dead sensor (CKP/TDC).next check conntinuty between sensor terminals and ground check all four prongs on sensor if theres continuity on any one replace sensor, next key off and sensor connected . remove the pcm 31 pin connector (C) here a diagram of it. at the pcm connector measure resistance between terminals C2 and C12 it should be 1200-3200 ohms, then check between C3 and C13, again 1200-3200ohms if the ohms are off then check wires that fail omh test.next test is with connector again test connector c2 (blue /white wire) to ground and C3 to ground if continuity exists then repair wire that fails between connector and sensor, if all tests are good then try a good pcm. i dont think its pcm, i think if its not a wire then replace sensor , but good luck and i hope this helps.i got the code p1361 - johnjohn2_18.gifjohnjohn2_19.gif

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does anyone know97 Honda Odyssey with code P1361 Tdc?


P-Power Train
1-Manufacturer Specified Code (Honda)
3-Ignition System, Misfire
6-Component or Sub-System Section
1-Component or Sub-System Section

P1361 is: Intermittent Interruption In TDC 1 Sensor Circuit.
Check out the TDC sensor, connector 124 (grey and on the distributor) check power and grounds. It's missing a signal from the TDC sensor in the distributor and causing a misfire.

Oct 24, 2014 | 1997 Honda Odyssey

1 Answer

Honda civic codes p1361 & p0113 along with gas smell


P1361 HONDA - Top Dead Center Sensor 1 Intermittent Interruption
Possible causes- Top Dead Center Sensor 1 harness open or shorted
- Top Dead Center Sensor 1 circuit poor electrical connection
- Faulty Top Dead Center Sensor 1P0113 HONDA - Intake Air Temperature Sensor Circuit High Voltage

Possible causes- Dirty air filter
- Intake air temperature (IAT) sensor harness is open or shorted
- Intake air temperature (IAT) sensor electrical circuit poor connection
- Faulty intake air temperature sensor

Oct 17, 2012 | Honda Civic Cars & Trucks

1 Answer

My 02 civic showing codes P0118 and P1361 any answer


1) proceed according and fix it.
a) P0118 bad oxigen sensor see the diagram attached
b)P1361 TDC sensor intermittent see the diagram attached.
God bless you

5_22_2012_10_26_33_am.jpg5_22_2012_10_26_51_am.jpg5_22_2012_10_27_12_am.jpg

May 21, 2012 | 2002 Honda Civic

2 Answers

P01361


Diagnostic Test Code (DTC) P1361 s a "manufacturer-specific" DTC, and for a 2000 Honda Accord, it applies ONLY to the 3.0L V-6 engine (which would have been nice-to-know up front - especially when you are asking for help repairing your engine controls).
DTC P1361 is defined by Honda as "TDC1 Sensor Intermittent Interruption".

(Note: TDC = Top Dead Center. PID= Process IDentifier)
A diagnostic scan tool capable of watching the TDC sensor PIDs (and preferably, graphing them) is REQUIRED to: (A) determine if this is truly an intermittent condition or a "hard fault". (B) verify PID data while testing for intermittent connections in the wiring harness and connectors. (C) verify that the concern is actually fixed after any repairs are made.

May 17, 2012 | 2000 Honda Accord

1 Answer

P1361 tdc sensor intrmittent interruption


p1361 is intermittent interruption in tdc 1 sensor curcuit Turns out Top Dead Center (TDC) sensor is bad. the sensor is located behind timing chain cover, you have to take cover off to get to it. on 2001 honda civic. take off top timing belt cover, about half way down the cover is the connection for the tdc sensor, check the connector and wiring.

Aug 23, 2010 | 2001 Honda Civic

1 Answer

96 accord code p1361 what odes it mean? how can i


CODE 1361 Intermittent Interruption In TDC 1 Sensor Circuit

First off check to see if the connection may be loose or not even connected. also check the wires. Probably you will end up needing a new sensor, but maybe not. it is the Top Dead Center sensor.

Hope help (remember rated this post).

Apr 16, 2010 | 1996 Honda Accord

1 Answer

My honda civic 98, had a check light engine ON P1361 and P1399


P1361 is an intermittent signal from the TDC sensor .. thats located under the top timing belt cover on the right side of the engine .. about half way down that cover is the connector for the TDC sensor .. check that connector and its wiring ...P1399 is an ignition problem .. and thats likely caused by the TDC sensor being intermittent .. you might be able to fix the connector if its loose or full of water but the sensor is hard to get to .. very tight place to work in but not impossible .. this is something that should be fixed soon .. no emergency but the timing may drift off if the problem persists ..

Feb 22, 2010 | 1998 Honda Civic

3 Answers

1998 Prelude VTEC P1361 code, what's the most likely failure.


Need a clear question and better info. However, based on the little that was posted...

Code P1361 is ignition coil circuit low. You'll have to do some electrical troubleshooting to locate the cause.

Low oil will also can also result in the oil pressure sending unit cutting power to fuel pump relay. This is done to prevent engine damage due to low oil.

May 16, 2009 | 1998 Honda Prelude

1 Answer

I have a 2001 honda civic took it to autozone and had the check engine light checked and it came back witha p1361 code anybody no what a tdc 1 sensor circuit is


TDC top dead center sensor. Tells when the #1 piston is at top dead center position.
P1361 Intermittent Interruption In TDC 1 Sensor Circuit

Apr 03, 2009 | 2001 Honda Civic

2 Answers

Code error P1361 Honda CIvic LX 2002 -- What it really means? Appear Check engine light intermitent. In my case after Timing belt, water pump, tensor, oil seals and spark replacement. Car lose power and...


P1361 TDC Sensor Intermittent Interruption (I got this from Engine-Light-Help.com)
TDC should mean Top Dead Center.
It is the sensor that tells the computer the #1 cylinder piston is at the very top. And therefore, fires the spark plug.

Since the maintenance done above, I believe the the timing marks for the timing belt is not lined up properly. Being off by one tooth will cause this problem.

Mar 21, 2009 | 2002 Honda Civic

Not finding what you are looking for?
1998 Honda Prelude Logo

879 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...