Question about Acura TL

1 Answer

What is the maintenance code B24 on a 2005 acura tl, and also how do i reset the oil life on the mulitpurpes display?

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acura Master
  • 17,970 Answers

B code is oil and filter change with brake inspection and clean, lube, adjust:
1 would be tire rotation
2 is replace engine and cabin air filters
3 is replace transmission fluid
etc etc

If you go to myacura.com, register your vehicle then there is a service area that lists all codes

You should check to make sure they reset the oil life sensor when they changed the oil. Id they didn't, back to delarer and finish this job.
Keep us updates.

Posted on Nov 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

3 Answers

I had my oil changed in my 2007 Acura MDX this morning and the Honda Dealership had no idea how to reset the indicator. How do I do this?


Courtesy of oilreset.com:
Turn the ignition to (II) - do not start the engine. Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed. Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display. Select RESET by pressing the INFO (??²/??¼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100. Turn the ignition off and then start the engine to verify the indicator has been reset. *Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).
Best of luck! Greg

Jan 28, 2011 | 2007 Acura MDX

2 Answers

After servicing my acura TL 2005. I still get diplay that "servicing due time passed" is that a fault?.


You need to reset your service reminder.

  1. Turn the ignition switch to the ON (II) position.
  2. Press the INFO button (button with arrow icons) repeatedly until the engine oil life is displayed.
  3. Press and hold the SEL/RESET button for 10 seconds. The multi-information display will ask for a confirmation.
If you are sure you want to reset the display, press the SEL/ RESET button to select "OK".

Dec 19, 2010 | 2005 Acura TL

1 Answer

What does the A12 Maintenance code means in Acura TL 06


It is an oil change and oil filter, a tire rotation and air filter change. A12 means the A1 and A2 services are due, hence A12

Nov 29, 2010 | 2004 Acura TL

2 Answers

How to reset service light on 2007 Acura MDX


The full procedure how to reset oil service light Acura MDX. After an oil change, if you like to reset any maintenance oil light for Acura cars. Or any error which appears on the display.
http://resetservicelight.com/reset-oil-service-light-acura-mdx/

Oct 14, 2010 | 2007 Acura MDX

1 Answer

How to reset the maintenance code B12 on a 2007 Acura TL? Just changing the oil doesn't clear the code.


hold the reset button for 30 secs then will enter a new screen press the rest one more time than done

Jun 11, 2009 | 2007 Acura TL Sedan New Cars

2 Answers

Yellow/gold wrench is illuminated on dash board


Please note:

Honda makes reference to proper vehicle maintenance in their service/user manual. Consult your authorized Honda dealer before doing anything that may void your vehicle warranty.

https://techinfo.honda.com/rjanisis/pubs/om/AC0606/AC0606O00192A.pdf

Owner's Manual page 193-197.

Resetting the Engine Oil Life
Indicator

Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100 %’’ on the odometer/
trip meter display the next time you
turn the ignition switch to the ON
(II) position.

If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:

1. Turn the ignition switch to the ON
(II) position.

2. Press the Select/Reset knob until
the engine oil life indicator is
displayed.

3. Press the Select/Reset knob for
more than 10 seconds. The engine
oil life indicator and the
maintenance item code(s) will
blink.

4. Press the Select/Reset knob for
more than 5 seconds. The
maintenance items code(s) will
disappear, and the engine oil life
will reset to ‘‘100.’’

Important Maintenance
Precautions

If you have the required service
done but do not reset the display, or
reset the display without doing the
service, the system will not show the
proper maintenance intervals. This
can lead to seriousmechanical
problems because you will no longer
have an accurate record of when
maintenance is needed.
Your authorized Honda dealer
knows your vehicle best and can
provide competent, efficient service.
However, service at a dealer is not
mandatory to keep your warranties
in effect. Maintenance may be done
by any qualified service facility or
person who is skilled in this type of
automotive service. Make sure to
have the service facility or person
reset the display as previously
described. Keep all receipts as proof
of completion, and have the person
who does the work fill out the
maintenance record. Check your
warranty booklet for more
information.

Information obtained from:

https://techinfo.honda.com/rjanisis/RJAAI001_OMANUAL.ASP?YEAR=2006

If the information provided to you was useful, please rate my response.

Thanks,

OpenSource13

Apr 19, 2009 | 2006 Honda Accord

3 Answers

SERVICE DUE SOON LIGHT


Press odometer reset/adjustment shaft in, hold in and turn key to run position. Keep holding in the reset shaft in for about 30 seconds. release shaft. turn key off. restart car. Service Light should go off in about 5 seconds.

Mar 25, 2009 | 2008 Acura Tl

2 Answers

Service due soon code B3


Hi,welcome to fix ya.
that means you need an oil change ,tire rotation, air filter and cabin filter.

Mar 24, 2009 | 2004 Acura TL

1 Answer

I changed my oil on my LX and the change oil warning is not reset


RESETTING THE ENGINE OIL LIFE INDICATOR
On LX and EX models

If maintenance is done by someone other than your dealer, reset the maintenance minder as follows:

1. Turn the ignition switch to ON ( II ).

2. Press the SELECT/RESET knob until the engine oil life indicator
is displayed.

3. Press the SELECT/RESET knob for about 10 seconds. The engine oil life indicator and the maintenance item code (s) will blink.

4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code (s) will disappear, and the engine oil life indicator will reset to "100".

Jan 01, 2009 | 2004 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...