Question about 1998 Plymouth Breeze

1 Answer

1998 plymouth Breeze

I have a plymouth breeze but it won't start. the car has had the timing belt changed on it and a week later it shut off and never started again. Someone said it is running off of 2cylinders but then others say they never heard of that before.

Posted by on

  • 1 more comment 
  • Anonymous Mar 18, 2014

    wiring diagram or a plymouth breez 1998

  • Anonymous Mar 27, 2014

    1998 plymouth breeze front window does not defrost, but the back does. Also my heater does not get hot to warm the car.

  • Anonymous Mar 27, 2014

    car wont start

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

That is possible I have had cars do that before. although fixing it will not be easy because of the setup. You need to get the front cover off and check the timing marks to see if the cams are in time with the crank if one cam is off you can lose one or more cylinders...

Posted on Aug 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a timing belt with a 2.4ltr motor?


Lift the car on lift and remove right tire . Remove front engine mount on the timing cover. Remove timing cover. Align the top timing mark on camshaft to the mark on back cover. Crankshaft will align automatically. Lose the belt tensioner and remove the belt.
I will suggest to replace the water pump and the seal on the camshaft and crankshaft. Install the belt and turn by hand crankshaft twice. make sure the marks align again. Install the cover, mount,serpentine belt.refill coolant. Bleed the system and run the engine till warm and radiator fan start. Cool and check the coolant level again.
good luck

Jun 13, 2014 | 1998 Plymouth Breeze

1 Answer

99 Plymouth breeze won't start


what is the other posible reason a 99 plymouth breeze wont start it rolls over well i change the crank sensor,camshft sensor,ignation coil but won't start

Dec 28, 2012 | 1999 Plymouth Breeze

1 Answer

I have a 1998 Plymouth breeze that won't start.


Hello! I would suggest having a look at the Brown wire that connects to the starter solenoid...It may be touching chassis ground...Also check the Large Red lead that attaches to the starter...One or both are touching chassis ground...If the Red lead is against ground it will not blow a fuse, in that it is connected directly to battery...And give the systoms that you have...Guru...saailer

Feb 13, 2012 | 1998 Plymouth Breeze

1 Answer

How do I change timing belt in '98 plymouth Breeze 2.4 L?


Buy a timing belt book -- a quality professional one

Check on the internet

If you get a gates belt, I would hope that they
give you instructions & pictures

Jul 04, 2011 | 1998 Plymouth Breeze

1 Answer

Car shuts off


I would check the Idle Air Ctrl. valve.if not opening when coming to a stop eng will starve for air cause air is not bypassing the throttle plate when the plate is closed

Jul 07, 2009 | 1998 Plymouth Breeze

1 Answer

Won' start


timing is out! a tooth or two!!!frisky these are these are interfere belt CAUTION!!!! valve bend easy!!!!

Dec 27, 2008 | 1998 Plymouth Breeze

1 Answer

1996 Plymouth Breeze Check Engine Light is on


bring it back to them they could have left a wire off or pinched a wire when replacing the engine

Nov 18, 2008 | 1998 Plymouth Breeze

1 Answer

1998 Plymouth Breeze


change your sparkplug wires that will salve yor problem

Sep 16, 2008 | 1998 Plymouth Breeze

1 Answer

1998 plymouth Breeze


Timing belt has nothing to do with fuel issue. If you're only running on 2 cylinders...you need to find out if spark is missing from those cylinders. Also possible that when the timing belt was replaced, it was not timed properly which can bend a valve, causing rough running.

Jun 17, 2008 | 1996 Plymouth Breeze

Not finding what you are looking for?
1998 Plymouth Breeze Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

74418 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7254 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...