Question about Dodge Ram Pickup 3500

Open Question

I have a 8.9l cummins engine it is timed electronically but has a rotary fuel pump located lside eng where most pumps are mounted on cummins eng.seems to me that it may be a sort of lift pump is that correct there are no timing marks on shaft there are no injection lines coming from pump to each cyl.i have to re seal pump do i not have to pay attention to timing on this model?cpl8641 qsl8.9 ser46738162 fam7cexy0540aab

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1996 Volkswagon Jetta Timing Belt replacement Procedure

there are 3 thing need to be fixed first the top timing belt pully should be between o.t so should be on . between o.t and secondremove the distrubuter cap it should be one mark 1 which is pointing on block and 3rd is crank shaft should adjust on 0 which you will find on the gearbox there is a green ruber cap remoce it and turn the main crank shaft u will find mark on the frywheel 0.
Thats it

Posted on Sep 24, 2008

Ad
alicantecoli
  • 22156 Answers

SOURCE: need the timing marks for a 3.1 td 5 cyl diesel injection pump

isusu engine?? have you looked for a 8mm hole in timing gear that corresponds with a hole on plate behind then lock it in with a bolt ,remove bolt after tightening belt .DONT FORGET THIS ???.....if you cant find anything do it with no timing marks easy --- piston no 1 at tdc valves closed spin pump till fuel comes out of no 1 injector feed and lock it all together,indirect diesel is 6/8 ,,,,,direct injection is 12/16,,,,and turbo is 18/22 btdc

Posted on Dec 13, 2008

  • 69 Answers

SOURCE: I have a 1998.5 dodge 5.9 cummings diesel 24 valve

It was located on the drivers side of engine close to fuel filter housing, but dodge has been selling and installing kits that change it to the in tank style for quite some time, so if not on block it must have been converted at some time.

Posted on Jan 05, 2010

  • 1 Answer

SOURCE: S4S diesel engine cant start it up had fuel pump done

How to set the injector pump timming?

Posted on Apr 22, 2010

  • 1 Answer

SOURCE: dodge cummins won't start, fuel reaching injector pump but no fuel coming out of injector pump.

i have a 2001 dodge cummins 1 ton won t start i have feul to the injector pump and to the injectors but won t start need help

Posted on Sep 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel pump located on 2000 peterbuilt 379


most diesels have the fuel pump integral with the pressure pump
you are talking about the transfer pump and not the high pressure injector pump a mention of what engine you have is better than the truck make as peterbuilt normally run 3 makes of engines ---cat, detroit or cummins

Aug 29, 2015 | Cars & Trucks

1 Answer

How to time fuel pump on a 580 backhoe with cummins motor


need to know the pump make and engine size as there are various pumps used on cummins engines.

Feb 12, 2015 | Cars & Trucks

1 Answer

Checking timing on bosch ve type injection pump


put some fuel in it then turn the pu,p ovedr till you see fuel spit from no1 ,also if this is a rotary pump you remove the little cover on the side of the pump and look at the letters ,i cannot for the life of me remember what they are and all my notes from the ford training centre in daventry got eaten by mivce when i moved to spain ,you could ask in your local bosch agent /repair centre they would know

Dec 28, 2013 | Dodge Cars & Trucks

1 Answer

I have 2005 volvo truck comuns isx eng .that dont picup gas


Fuel line. Check fuel filter and fuel pump. I fixed like this engine fitted on Iveco and Freightliner and other Prime movers.

Aug 16, 2011 | Volvo V70 Cars & Trucks

5 Answers

Dodge cummins won't start, fuel reaching injector pump but no fuel coming out of injector pump.


You said you have fuel flowing from the inlet line of the injection pump? But not at the injector lines?

May 05, 2009 | 1999 Dodge Ram

2 Answers

How to purge air from a cummins 24 valve diesel fuel system


CRACK LOOSE THE INJECTION LINES 2 OR 3 OF THEM WILL BEEN ENOUGH. TURN THE ENGINE OVER TILL FUEL STARTS PUMPING A LITTLE BIT. THEN TIGHTEN THE LINES. IF ENGINE STARTS WEHN BLEDING THE LINES SHUT IT OFF. AFTER LINES ARE TIGHT START YOUR ENGINE THE REST OF THE LINES WILL BLEAD AFTER A SHORT RUN TIME.

Feb 27, 2009 | 1988 Dodge D-Series Pickups

2 Answers

Locatation of fuel pump 82 ford f-250. 460 engine


Actually, even in 1982 Ford produced fuel injected vehicles. They used electric pumps, rarther than the mechanical one r_clark is referring to. So, the question is, is it fuel injected, or is it carbureted? If it's carubureted, r_clark is correct. The timing cover is on the front of the motor as you are facing it. If you look behind the large main pulley at the bottom front of the motor you'll see an oval shaped cover. That metal oval cover is the timing chain cover. Look to the left of it, still facing the front of the engine and you should see the fuel pump if you have a carbureter. If, on the other hand you have throttle body injection, the Ford F250 uses two electric fuel pumps. One is a low pressure pump which is inside the fuel tank, the other is the high pressure pump which is mounted on the vehicle's frame. That one will normally be located just in front of the tank on the inside rail of the frame assembly. It looks like a large cylinder mounted on a bracket with wires going to it. If you see a cylinder that just has a fuel input and output line with no wires, that is an inline filter, not the pump.

Also, keep in mind if you are asking about the pump because you are not getting fuel, you might want to check to see if you have a large canister style filter down there on the frame. If that's plugged, you won't get adequate fuel!

Jan 23, 2009 | 1982 Ford F 250

1 Answer

92 dodge p u cummins eng power steering pump


to bleed the system fill the fuel filter then crack the inlet fule line turn over untill you get fuel then tightnline and start

Jan 11, 2009 | 1992 Dodge Ram 350

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...