Question about Hyundai Motor 2004 Accent

1 Answer

I am having trouble removing the window roller handle so I can get the door panel off

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Contributor
  • 361 Answers

Ok mostof these have a plastic ocover over the phillips screw that holds the handle on. Run your finger between the handle and the door case right next to the case the other end to the winding handle knob, it should just pop the cover off and you will be abel to see the screw.

Posted on Nov 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i install a manual window regulator in an oldsmobile 2001 alero


Ok let's do this you need to have tool to remove window crank handle then remove door panel look for screws in arm rest then panel should be held on by plastic push pins remove the by prying door panel with screw driver after removal look at crank handle shaft you will find bolts attaching mechanism to door get help from another person to hold the glass after removing bolts you can work the unit to remove glass from the unit then reinstall glass into the unit and put back in reverse order this will take lots of patience but you can do this the glass is in a metal frame with rollers that slide into the mechanical window regulator make sure glass goes back into the window felt track during reinstall hope this helps.

Dec 05, 2014 | 2001 Oldsmobile Alero

1 Answer

How do i take door panel off?


remove all the hardware from inside door panel first, window roller handle or electric switch panel, and door handle, then you need to pry all the grommets out of the hole's they fit into down both sides and across the bottom, the panel then needs to come straight up and off, they make a simple little tool to pry the grommets loose, can be purchased at most any auto parts store, like shucks or Napa Harbor Freight also has them cheap.

Dec 15, 2013 | Jeep Cherokee Cars & Trucks

2 Answers

How do i take off the window roller to get my door panel off


There is a small horse shoe shaped clip around the inside of the crank handle. There is a special tool for removing the clip but if you can push the door panel in far enough you may be able to pop it off with two small screw drivers. For the trouble it takes I'd buy the special tool from an auto parts store since it's cheap.

Mar 19, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

How do u remove the drivers side door panel to fix the window


YOU NEED CLIP REMOVAL TOOL TO REMOVE WINDOW CRANK HANDLE.YOU NEED DOOR PANEL FLAT TOOL REMOVE DOOR PANEL HATE TO SAY DOOR PANEL HAS AT LEAST 8 CLIPS LOCATIONS 4 CLIPS AT THE BOTTOM PANEL 2 CLIPS ON BOTH SIDES DOOR PANEL. YOU HAVE TO REMOVE 2 SCREWS HOLDING DOOR PULL CUP.YOU HAVE RELEASE CLIP BEHIND DOOR HANDLE USING TRIM TOOL.IF YOU HAVE TROUBLE GETTING DOOR PANEL OFF.HAYNES REPAIR MANUAL CAN HELP.

Oct 07, 2010 | 2004 Chevrolet Cobalt

1 Answer

Trouble removing drivers door panel to check out power window.


there are screws located under plastic covers at the latch handle and, on the underside of the armrest

May 20, 2009 | 1997 Pontiac Grand Prix

2 Answers

Need to change door speaker, cant get the door paneling off nor the manual window roller upper off.


Take a flat screwdriver or other similar flat tool,gently pry between the window handle and door panel,you should just be able to see the clip that holds it on to the metal shaft of the window gear,you'll need a pair of needle nose pliers or a flat screwdriver to pull it off,to put it back on you put it on the widow handle and just pop it on the metal shaft.Hope this helps.

May 09, 2009 | 1998 Pontiac Sunfire

1 Answer

Driver's door panel removal trouble


I believe that you will need to remove that trim piece to access some screws. Check in door handle pocket to see if there may be a small cover hiding a screw.

Mar 27, 2009 | 2001 Lincoln LS

1 Answer

HOW DO I REPLACE THE DRIVER SIDE POWER MIRROR ON AN 98 F-150?


Remove the sail panel,the little panel on inside of door at the mirror.
Remove the window regulator switch plate, pry up on the front of it with a small pick or screw driver. Disconnect the electrical connectors.
Remove the top door trim panel screw that is behind the sail panel you removed.
Remove door trim panel screw at window regulator switch plate opening.
Remove door trim panel screw in the courtesy lamp housing. Remove the courtesy lamp lens.Remove the screw.
Remove the inside door handle trim cover.
Remove the bolt.
Remove the inside door handle.
Lift upward to remove the front door trim panel.
Remove the courtesy lamp.
Turn the courtesy lamp bulb socket one quarter turn and remove.
Disconnect the power mirror electrical connector.
Remove the three outside rear view mirror nuts.
Remove the mirror.

Jan 31, 2009 | 1997 Ford Expedition

2 Answers

Replace glass, drivers door on 1997 GMC 1/2 ton Truck ,2wd, Power windows


The door panel is held onto the door with clips but first you need to remove the screws from the grab handle on the door panel. then pop the bezel off around the inside door handle. very carefully!!! then using a clip tool pry off the peice that covers the rear view mirror nuts and pry gently all the way around the door panel until its loose then lift it up slightly to unseat the window channel strip off the door, then unhook your wires. As for the window roll it up, tape it to the door then line up the 2 10mm bolts that clamp it to the regulator with the provided holes in the door, loosen 'em up roll the regulator down and remove the window. Have fun guys!!!

Oct 28, 2008 | 1997 GMC Sierra

2 Answers

How do you repair a gmc sierra 1998 inside door handle


You have to remove the door panel, if you have roll down windows the handle will have to be removed. After panel is removed you have to drill the one rivet that hols the interior handle. slide the handle down and unfasten the rod retaining clip. Please make sure you do not break the clip. Install the new interior door handle, clip and provided fasteners. Try the door before you install the interior door panel, Note the is a good time to lube the window roller and the door mechanism. Make sure to install the water shield to provide the protecting from the elements. Line all the plastic retaining clips and or replace if they are broken. Good Luck.

Jul 22, 2008 | GMC Sierra Cars & Trucks

Not finding what you are looking for?
Hyundai Motor 2004 Accent Logo

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...