Question about 1989 Cadillac Sedan DeVille
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Dash Board Codes
the normal operating temp for these cars will fall around 198 f the way you rest the code is simple hold cool and warm switches on your A/C pannel until the codes clear off !!
Posted on Nov 12, 2008
all u do is pop them out, they pull upu may need 2 use a screwdriver or something to get them started, then u follow the wire down and theres a lil connecter u can pull
Posted on Apr 10, 2009
If you have the 3.8 ltr you just remove the belt, then the coolant hoses and then the bolts securing the pump to the block. Note: there is one long bolt in the pump that can be removed thru the access hole in the body side rail.
If you have a 4.1 or 4.5 ltr engine, you must first remove the A/C accumulator from its bracket, remove the right cross brace and the accessory drive belt. Remove the water pump pulley to pump bolts and then the pulley and lastly the bolts securing the pump to the block.
Posted on Jul 04, 2009
SOURCE: door panel removal
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
SOURCE: replace door speaker
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
Tips for a great answer:
Oct 21, 2012 | 1993 Cadillac DeVille
Oct 16, 2010 | 1989 Cadillac Sedan DeVille
Jun 21, 2010 | 1989 Cadillac Sedan DeVille
Apr 07, 2010 | 1994 Cadillac DeVille
Jan 19, 2010 | 1989 Cadillac Sedan DeVille
Jun 16, 2009 | 1987 Cadillac DeVille
May 30, 2009 | 1991 Cadillac DeVille
May 05, 2009 | 1995 Cadillac DeVille
Apr 10, 2009 | 1986 Cadillac DeVille
Dec 04, 2008 | 1989 Cadillac Sedan DeVille
310 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: