Question about 1991 Toyota Pickup

3 Answers

1991 Toyota pickup brake indicator light

The brake indicator light on my 1991 Toyota pickup is always on though we have had the brakes checked. Do you have any idea what would cause this? I'm new to this type of web site and don't know where to look for the answers but I'll keep looking. Thanks

Posted by on


3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 186 Answers

Low brake fluid or float in brake master cylinder stuck

Posted on Jul 10, 2008

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Thats all good that we have places to look to correct our problems, but tell me, what is the correct position for the emergency brake hanle to be in?

Posted on Nov 12, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check the emergency brake handle. I have the same problem with mine. If the emergency brake handle is not in the correct position, the brake light on the dash comes on. Hope this helps.

Posted on Nov 14, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Brake lights wont work and dies in 6" of water

Check brake light connectors for green residue if so spray with WD40 to clean. Also change bulbs even though they look ok they could still be knackered.

Mar 21, 2014 | 1994 Toyota Pickup

1 Answer

1991 toyota pickup 6 cyl.manual tranny 4x4 coming home the other day poped out of cruise and brake light and battery light came on

Brake light and battery light coming on mean the Alternator may have died on you. Check the alternator, it may be bad. The popping out of cruise may have happened because it did not have enough current flow, due to alternator failure.

Aug 26, 2013 | 1991 Toyota Pickup

1 Answer

Parking brake light stays on in 1991 toyota pickup

where the cables meet the backing plates there is a pivot point that gets stuck you can see it on the back side of the wheel

Oct 09, 2012 | 1991 Toyota Pickup

1 Answer

Lost brake lights and cruise

have you 12 volts at the brakelight bulb holder?as with a lot of pickups the wires on the body get broke i would say a broken wire live/netural/ground good luck.adrian,,,,,,

Jul 30, 2010 | 1989 Toyota Pickup SR5

1 Answer

How to connect a 4 wire trailer system to a 1994

Tail lights and brake lights are on the same wire.
Connect the wire from the brake light to the connector in the car to the tail lamp wire connector and you will be set to roll

Apr 04, 2010 | 1991 Toyota Pickup

5 Answers


Check your brake fluid level in the reservoir; some Toyotas have wheel cylinder sensors; some Toyotas have master cylinder sensors; you also have a sensor on the parking brake and on the brake pedal inside the cab. Check all that.

Feb 14, 2010 | 1993 Toyota Pickup

2 Answers

1991 toyota

I suspect what you have is a vacuum leak.

1. Try hunting down the leak with carb spray. Don't get too crazy with it, when you get to your leak it will change the way it runs. Also do not deliberatly spray this on spark plug wires as one stray spark and you will need a fire extinguisher. This method is safe, just use your head.

2. If you detect a leak at the brake booster, unplug the vacuum source line for it and plug it. Then trying running the truck again. If it runs normal the leak is in your booster and must be replaced.

Feb 03, 2010 | 1991 Toyota Pickup

1 Answer

Prerunner wont pass smog due to engine service light

Try this:-
Theres a vaccum pipe tht fits on the brakes booster just under the mastercylinder probabely it may have popped out or the sensor could be faulty ....worth a try ;)

May 07, 2009 | 1991 Toyota Pickup

1 Answer

1991 toyota pick-up ( Blinking brake light & engine light )

Take the vehicle for diagnosis. Your master brake has gone bad. This is what generates the engine light too. Good luck.

Mar 18, 2009 | 1991 Toyota Pickup

1 Answer

Dash brake light flashes

check rear wheel sylinders for moister. an indicator for a leak. replace it then bleed brakes. refill resivore should be fine then. check front calipers also or leaking line.

Feb 10, 2009 | 1991 GMC Sierra

Not finding what you are looking for?
1991 Toyota Pickup Logo

565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides