Question about 2006 Toyota Corolla

1 Answer

I need to replace the pressure control cylinder in my 2005 Toyota Corolla LE.....How expensive is this to do ?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

Hello. Welcome to FixYa Please allow us to assist you.

Regarding the Pressure Control Cylinder, we would recommend that you do not replace it; as there is really nothing wrong with it. The code you are seeing, P-2716, does indicate a "fault" with the solenoid, but the main issue is the car's computer, not the solenoid.

What you need to do is take your car to a Toyota dealer.
There is a Technical Service Bulletin that addresses this issue.

The recommended fix is a replacement of the engine control unit (the computer). This service will be performed at no charge to you, if your car has less than 80,000 miles on it.
Get the computer replaced, and your problem will disappear.

Thanks for choosing FixYa for assistance today.

Posted on Nov 11, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the torque converter clutch relay (code P-0750) located?

Torque converter is inside of the bell housing on the transmission

Aug 25, 2014 | 2005 Toyota Corolla LE

1 Answer

Need wiring diagram for 2006 pressure control solenoid

manual that you can get at autozone for around $20.00 should have it and all specs.......good luck..

Aug 18, 2012 | 2005 Toyota Corolla

2 Answers

Ocv circuit in toyota

OCV is the oil control valve for the VVTi system, it's located on the side of the cylinder head at the front and has an electrical connector on it, the valve may the problem but it cou;ld also be a clogged oil passage that supplies regulating pressure to the valve or the VVTi gear, the system operation can be checked by connecting an intelligent tester that can activate the system to verify if the valve is the problem, before replacing expensive parts I would make sure what the problem actually may be.

Feb 28, 2012 | 2005 Toyota Corolla

1 Answer

I have a 2006 Toyota Corolla, only 17k miles, bought from Carmax in mid-2007. My check engine light came on, had it checked, and it read P2716 - Pressure control solenoid D electrical fault. Probable...

DTC P2716 - Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)

If you need to test this electrical components and wiring. Tell me if you need the TSB about this DTC.

Dec 29, 2010 | 2005 Toyota Corolla

1 Answer

I installed a new clutch and now I cannot change gears when the motor is running. I replaced the slave cylinder, master cylinder, pressure plate, throw out bearing and clutch housing. 1995 Toyota Corolla

if you have bled the system properly,the only answer is you have fitted the friction plate on backwards.....(the word front,printed,on the metal centre goes toward you/facing you.)check to see if you have full travel on the actuating lever when pedal is fully depressed....

Jun 04, 2010 | 2005 Toyota Corolla

1 Answer

Pressure Control Solenoid "D" location on a 2005 Toyota Corolla?

this solenoid is part of the solenoid pack that is located on the valve body inside the transmission.

Mar 28, 2010 | 2006 Toyota Corolla

1 Answer

OBD code # P2716 for 2005 Corolla S lists as: ''Pressure control ''D'' performance or stuck off'' What do I need to replace or do to clear trouble light on dash?

Hello, and welcome to FixYa. Please allow us to assist you.

The P-2716 code that you are experiencing is a known issue by Toyota.

Changing any of ther pressure controls, as indicated by the DTC code will not rectify your issue.

What you need to do is replace the electronic control unit, or engine control computer, with an updated unit; as indicated by a Technical Service Bulletin issued by Toyota.

The good news is this: the ECU is a covered item, under the federal emissions warranty; if your car has less than 80,000 miles, the ECU will be replaced for free.

Thanks for choosing FixYa for assistance today.

Mar 28, 2010 | 2005 Toyota Corolla

1 Answer

Headlamp unit needs replaced

It will not cost much. It's about $150 in my country

May 20, 2009 | 2005 Toyota Corolla

Not finding what you are looking for?
2006 Toyota Corolla Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides