Question about 2003 Hyundai Accent

1 Answer

I changed both bulbs the high beams work and the fuse isn't burne dout but my low beams still wont go on

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a similar problem with my 2003 accent. The problem is a GROUND SHORT in the multi-function switch, which apparently needs to be replaced. This is located in/under the turn signal/high beam switch on the left side of the steering column, and probably needs to be replaced. Check your battery's ground connection first, to make sure it is correct.

Posted on Nov 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The high beams on my 1981 Toyota diesel pick do not work. When I switch to high beam it's darkness. Ideas?


Buy dual beam light bulbs. When a single bulb is installed or the dual bulb got the high beams burned. It wont work.. Also check if the switch of the low-high beam is working properly. To make it easy. Buy a dual bulb and try it. Good luck

Dec 27, 2015 | Toyota Cars & Trucks

1 Answer

My 97 dodge neon head lights wont turn on but every other light will fuses look ok Wat is my problem


  1. Turn the light switch off and on several times.
  2. Change from high beam to low beam several times.
  3. Use a multi-meter to check for power to the plug that the bulbs connect to. Sometimes there are components other than fuses than can malfunction and stop the flow of electricity.
  4. Change one of the bulbs for a new one. There is a possibility that both headlights are burned out.
Sometimes, the high/low beam switch gets "stuck" between the two settings and the headlights will not come on at all.

Dec 16, 2015 | Dodge Cars & Trucks

1 Answer

Low beam lights wont turn on only brights


first thing try a new bulb or test the plug connection at the headlights for high beam and low beam i have seen the 2 bulbs burn at same time so check if you have power and ground at the headlights and no fuses burnt

Jan 28, 2014 | 2009 Saturn VUE

1 Answer

The low-beam headlights don't work. The fuses are fine as I replaced them with those of the high-beams and the high-beams worked. Other than both bulbs burning out at the same time what else could be...


Possibly the bulbs. Take a look at them; they have 2 coils per bulb, one for the low beam and one for the high beam. So it is possible that the more used low beam burns out before the lesser used high beam.

Aug 19, 2011 | 2000 Chrysler 300M

1 Answer

I have no low beam headlights. The high beams work and I have changed the switch and bulbs and checked the fuses. what next


Check the connectors that go to the headlight bulbs to see if they are burned or melted. Low beam lights are on longer than high beams. The heat buildup around the connectors normally melts them.

Sep 27, 2010 | 2005 Chevrolet Trailblazer Ext

2 Answers

No low beam lights or daytime lights - high beams work


both low beam ights wont work on my VW 2000 beetle I have checked the fuses, bulbs, and relays what could be the problem

Feb 04, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

Low beam headlamps wont turn on change bulbs and checked fuses and still wont come on.


did you check for a relay in your fuse panel? there should be a relay that controls your low beams and one for your high beams. check for that and then if high beams are working swap it with low beam relay. if your problem switches to low beams working and high beams not working replace the bad relay.

Jan 26, 2010 | 1998 Ford Explorer

1 Answer

Low beams stopped working simultaneously


Well I would certainly check the fuse because that both lights burned out. If only one had burned out I would replace the bulb. If the fuse is good I would purchase 1 bulb and see if the new bulb works. Often times people will replace both bulbs because they come in 2 packs cheaper than singles. This also can cause both to burn out at the same time. Check the fuse and then replace a light, if replacing one light works replace the other, this should cure the problem.

Dec 11, 2009 | 2006 Honda Odyssey

3 Answers

DRIVER SIDE LOW BEAM NOT WORKING..


change the bulb the bulb has two elements one of those are bad

Feb 24, 2009 | 1997 Ford Explorer AWD

1 Answer

Low Beam


Make sure you have a good switch
bulbs good
relay and or fuse is good

Jul 02, 2008 | 1998 Volkswagen Cabrio

Not finding what you are looking for?
2003 Hyundai Accent Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...