Question about 1999 Chevrolet Cavalier
Detach the negative battery terminal and disable the airbag system if you have it. Remove the steering wheel. To do that remove the clip and the large nut and then use a steering wheel puller. (You will need to buy or rent a steering wheel puller They can be found at most auto parts stores) Remove the turn signal switch assembly. Place the lock cylinder in the run position. Remove the turn signal switch housing screws. If you have tilt steering column you will need to remove the pivit pins on the sides of the tilt housing. (you will need a pivit pin puller which can be found at an auto parts store). Pull the buzzer switch out (make sure you note how this is correctly replaced. If done wrong the buzzer will stay on....it is a little plastic piece with two wires). Turn the lock cylinder to Accessory. Remove the lock cylinder screw which is by the buzzer switch you just removed. Remove the lock cylinder.
Posted on Jun 25, 2008
Tips for a great answer:
Aug 21, 2016 | 1999 Chevrolet Cavalier
Aug 18, 2014 | 2002 Chevrolet Malibu
Oct 14, 2012 | Cars & Trucks
Dec 10, 2010 | 1999 Chevrolet K1500
Oct 06, 2010 | 1999 Mazda Millenia
Apr 24, 2010 | 1999 Chevrolet Cavalier
Nov 21, 2009 | Chevrolet Cavalier Cars & Trucks
258 people viewed this question
Usually answered in minutes!