Question about Ford Bronco

1 Answer

My low beam light does not work only the high beam works a change the light switch. and check all my fuses and all of them are ok.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

Could be the headlight dimmer switch.

Posted on Nov 11, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
maklean
  • 1665 Answers

SOURCE: Headlights not working

Lihgting switch must also be checked
8673aab.gif

Posted on Jun 08, 2008

MsMithra
  • 79 Answers

SOURCE: Headlights not working

If all fuses and bulbs are fine, it's probably a problem with the wiring harness. Take it to the dealer. Wiring harnesses are not something to do by yourself unless you're experienced with wiring on the specific car.

Posted on Feb 05, 2009

  • 66 Answers

SOURCE: i have a 2001 chevrolet cavalier and the high beam

Sounds like its a problem with the light switch handle. Had it myself as well...
If you're savvy enough around car electronics take out the light switch handle, take it apart, find the problem and fix it. Inside the handle-switch you have several slide-switches and some double action slide switches.
Otherwise - get a different switch from a local junkyard or get a new one from your dealer.
Good luck.

Posted on Jul 11, 2009

  • 1 Answer

SOURCE: Jeep Headlights not working. High beam works

had the same problem on my 92....check under the hood on the drivers side,towards the front,there is a "junction box" with all of the lighting wires connecting from the switches to the lights.My wires were all corroded inside,so I cleaned the ends and bought a new box from the local electronic supply store.The problem has not come back.

Cheers

Posted on Jul 15, 2009

  • 7353 Answers

SOURCE: low beams don't work - both out at the same time.

DID YOU CHECK THE BULBS?

Posted on Nov 04, 2009

Testimonial: "spot on."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High beam do not work at all low beam works fine when switched to high beam no lights at all


I suggest you first check the bulbs. It isn't unusual that both bulbs fail together.
If the bulbs are ok refer to the vehicle handbook and check the fuse(s).

If those are ok it is time to move onto the supply and check it through with the aid of a wiring diagram. The fault could be a relay or the dipswitch, wiring, connections...

It is worth noting on later vehicles electrical equipment is not switched on with the light, wiper, heater switches but these merely instruct a local black box to send a signal to other black boxes to perform the desired function. In the case of problems a dedicated scan tool will be required for diagnosis.

Aug 10, 2015 | Cars & Trucks

2 Answers

Low beam lamp(s) fault detected 2014 kenworth no low beam lights


First check light relay fuse, if ok check battery voltage at low beam light terminal, if ok replace low beam bulb, if no voltage check switch side of relay, if voltage replace relay, if no voltage check headlight low beam switch.

Jun 26, 2015 | Cars & Trucks

3 Answers

Prius high beam lights work but low beam lights do not work?


On a 2008 Prius, If both High beams work but only one side has working low beams, then it is most likely a fuse. So before breaking your knuckles to change the bulb, check the fuse first. I found out the hard way as my mom distressed to me that her drivers side headlights were out. So without checking to see if low and high were working, I proceeded to remove and replace the bulb - ouch! There are 4 10 amp fuses that protect the circuits for low/high beam function. They are under the hood in the fuse box on the drivers side and they are marked on the box cover. Check them before changing the bulb.

Oct 29, 2012 | 2006 Toyota Prius

1 Answer

My low beams don't not work, only high beam. All other lights works fine. Problem started without any known issue. They were working just fine two nights ago. Where should I start? Is there a fuse or relay...


on a lot of vehicles theres a fuse for low and high beam headlights. could be a relay also. check the fuses in the fuse box. if both headlights have been changed and the fuses or relay are ok, then the problem is either in wiring or a bad dimmer switch. have a good day !!

Jan 27, 2011 | Dodge Dakota Cars & Trucks

1 Answer

I have aproblem with my Buick Allure both low beam stoped working.The high beam works OK. Checked the fuses and there OK can you help


suspect low beam head light fuse, check fuse if ok suspect that both low beam head lights are burned out ( it happens) ,if ok suspect headlight dimmer switch.

Nov 16, 2010 | Chevrolet Avalanche Cars & Trucks

1 Answer

Low beam lights won't turn on, running lights don't work although the high beams work ok


CHECK THE FUSES TO THE LIGHTS,CHECK THE HEADLIGHT SWITCH,SOMETIMES IT ACTS UP AND OR NEED TO CHANGE THE SWITCH, CHECK WIRES TO AND FROM THE LIGHTS

Oct 30, 2009 | 1996 GMC Yukon

3 Answers

High-low beams not working


Check for headlight relay and fuse. Some cars have separate circuits for head light flasher and normal high/low beam. From your description, I would suspect a bad connection to/from relay or relay itself.

Jul 07, 2009 | 2006 Hyundai Accent

1 Answer

LOW BEAM LIGHTS


Hi Rich Million,

Check the bulbs for the low beam problem and if they're ok, check the fuses under the bonnet (hood) which are found in the fuse box. If you've already checked those, go to the fuse box inside the vehicle.

Still no luck....remember that there are fuses and relays inside the cabin behind the kick panel.....You may find that there is a problem with the main fuse box.....If you drive over rough terrain, check the connections under the main fuse box....even if your roads are all smooth, it's still worth checking.....

Regards Johngee10

Sep 25, 2008 | 1992 Toyota Corolla

4 Answers

Low beam headlights do not work, but high beam headlights do


Clyde,

I've been troubleshooting this same problem on a different vehicle this week, and I can give you the steps I'd take.

1. If both sides went out at the same time, the problem is *NOT* likely to be the bulbs.

2. Check the fuses to see if both low beam lights are on the same fuse. Many cars have one fuse for low beam and another for high beam, so both lights out at the same time typically means fuse blown.

3. If the headlights are OK and the fuses are OK, then the problem is *LIKELY* the headlight switch. In my case, AutoZone has one and it can be installed easily; but in your case, that may not be as simple.

Please post your findings or comments.

Jul 16, 2008 | 1991 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

83810 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...