- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No solution here, but wondering what your next step was...I think the same thing happened to me, but wanted to check the fuse at least before I have my van towed to some mechanic in Italy. Did you locate the fuse? Which box and was it labeled something other than fuel pump?
if you own a toyota sienna van 2007 and up and are hearing a clicking noise when you open your frount doors you need to go to your dealer and have your door checks repaird . door check is the arm that holds your door and keeps it from opening to far. don`t wate to long they will do a lot damange if not taken care of.and Toyota will pay for it.
Hello! If your Sienna was sold through a Toyota Canada Dealer, it will have the block
heater already installed... You may have to hunt around inside to find
the cord and pull it through the grill... All Canadian models have them... The coolant does not need to be drained to install the block heater in
an 2007 + sienna. It uses a heater that slides into the block with a
locking tab. Location is on the back side of the block itself by #5
cylinder... Easy to get to from under the van...The
heater in size is about 4" long and about 1" wide...#5 cylinder is closes to the transmission on the back side (firewall side)...See photo below of a Toyota Block Heater; Part #
(00113-00902) Cost $60
I don't have a Sienna but I do have a 2008 Toyota Camry SE. After it being in the garage for many months, 8 months I think, I had to give the battery a jump to finally start it up. Well The jumper cables I used weren't that great. They flickered and seemed to smoke a little. So i removed them and put a better set on to get a charge. I didn't think anything of it. After that charge came through and i was able to accelerate at all... The throttle was to the floor and the car would not even go up .5 RPMs... After several days and talking to the dealer, I was about to call a Tow to have it taken to the dealer. Luckily my friend came by with one of those diagnostic readers and it spit out the P2118 error code. Immediately we looked it up and found this site. Thanks to Fixya.com I was able to determine that it was a freakin measly fuse that blew due to bad jumper cables... Thank god for the Fuse and thank you to Fixya.com that I was able to determine this so quickly!!!
I am glad my solution provided you with happiness. A gift, no, you do not need to do that. I appreciate the thought, though. The graciousness of a "FixYa" rating regarding my helpfulness would be GREATLY appreciated. That I all that I need form you. A happy Client. THAT is what FixYa is ALL ABOUT. Have a great week. Thanks again.