Question about Mitsubishi Galant

1 Answer

I want to find a diagram of a mitsubishi VR4 galant gearbox pulled to pieces so I can take mine apart and rebuild it. Where can I find a diagram on the web?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

Without knowing the exact Transmission type installed and the year of the vehicle the only place I can recommend for any kind of diagrams for your transmission is
http://wareseeker.com/free-automatic-transmission-parts-diagram/

Your going to have to search the site for the correct diagrams. If you get the Transmission model number and good search that for rebuild kits you will find a site that offers the rebuild kits that transmission shops get for a lot cheaper than they will charge. These kits usually come with the diagrams to dis-assemble and re-assemble the transmission once it is out of the vehicle and list the torque specifications you'll need to know in order to do the job. I don't remember the exact name or I would include that one for your use. I have used it several times to get parts kits and diagrams in the past.

Posted on Nov 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cv joint on 98 vr4 galant wont come off


Use a prybar to remove the CV joint, place against hosing and gently pry to release CV.
This is assuming you have un bolted the necessary front end parts prior to removing the CV joint.

Jan 21, 2013 | Mitsubishi Cars & Trucks

1 Answer

My reverse lights are not working in my 97 vr4 galant


Hi there, I am not a mechanic, but there should be a switch by your gearbox close to where you put it in reverse that closes the circuit for the lights to burn when you put it in reverse. Hope it helps.

Aug 07, 2012 | 1996 Mitsubishi Galant

1 Answer

Mitsubishi legnum/galant vr4 1996 front drivers drive shaft removal


when you pop the axel out of trans you could possibly lose a little fluid but not a whole lot you will lose less if the vehicle is only raised on the side you are removing i would also check the hub bearing

Mar 30, 2012 | Mitsubishi Galant Cars & Trucks

2 Answers

I need to check my fuel filter on my 1994 Mitsubishi Galant VR4. Where is it located and whats the easiest way for an unexperienced person?


For 1994 Mitsubishi Galant 2.4L MFI 4cyl the Fuel Filter is located under hood, driver side, upper firewall, mounted in fuel line.

Hope helps.

Apr 14, 2011 | Mitsubishi Galant Cars & Trucks

1 Answer

I have a mitsubishi galant vr4 1995 made,...i have a problem with the automatic,..it doesnt shift stuck in 3rd gear,...supposed to be its an automatic,..so its start from 3rd gear,..the accelerate comes...


Your transmission has gone in to a limp home mode or fail safe mode, trans computer has locked third gear to prevent any more damage. Needs a diagnostic scan to confirm fault code could disconnect battery for 10 mins and drive to see if problem reaccures. Trans computer common to fail.

Apr 12, 2010 | 2000 Mitsubishi Galant

1 Answer

89 mitsi vr4, i have gearbox loss, somthing catching bye thrust b


seized on main shaft spines.If you can spray DW40 on the splines and leave for a while should.come out shacking and pulling.

Jun 08, 2009 | 1989 Mitsubishi Galant

1 Answer

Mitsubishi evo/vr4 idle fluctuating between


Galant VR4 or Evo. which car is it?

have you reset the ecu? disconnect the battery for 5 minutes. make sure you have any radio codes if your radio has a security code lock.

Also could be the idle control stepper. Mitsu gives it some name like ICU but it's a small mottor attached to the throttle that opens and closes valves to let a little more air in and up the rpm.if it's sticky try cleaning the throttle and the valves.

May 05, 2009 | 1988 Mitsubishi Galant

1 Answer

How to remove a 1989 e39a vr4 engine


try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Mar 13, 2009 | 1989 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

627 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...