Question about Isuzu Axiom

1 Answer

I had obcd2 and actron scanners both same code p1340 how do i know witch ones right and what it take to fix it without costing a arm or leg if you could help me out i would appreciate it. thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The P1340 fir Isuzu has to do with the ION SENSING MODULE. I have the same code on a 2001 Rodeo. From what I've seen online, the best place to start is checking the plugs and replacing them if they're in rough shape (many posts suggest you need to stick with the original Denso plugs - I'm buying a set tonight in hopes of getting this inspected and selling it). I hope this helps you. Good luck!

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 audi a4 quatro 2.8l DOHC check engine light is flashing and my scanner gave the fault code p0305 and a pending code p1340 . What should I do tofix the problem?


p 0305 is misfire on no 5 cylinder code p1340 refers to camshaft (CMP) sensor 1 bank/ crankshaft position (CKP) sensor ---out of sequence === causes ---valve timing--CMP/CKP sensor installation---CKP sensor rotor
misfires are more injector problems that plugs
take it to an authorized service center for the position senor and valve timing problems

Dec 12, 2016 | Audi Cars & Trucks

1 Answer

I have code P1340 igniter circuit on a toyota yaris


Error Code:P1340
Description: Camshaft Position Sensor B Circuit Malfunction
Solution:
-
Delete codes
- Check the connector and wires attached to the cam shaft position sensor.
- Cam shaft position sensor defective. (Replace with good known one).
- Wiring harness.
- ECM.

Mar 16, 2014 | 2004 Toyota Yaris 1.0

1 Answer

I replaced both head gaskets and have no power, popping noises, and engine stalls out.


P1340 the code definition is camshaft sensor "B" circuit malfunction.If this was "A" then its the camshaft sensor, Your problem may reside in the ion sensor,The purpose of the ion sensing is to measure electrical resistance when they are not firing, This means you need to be sure of the correct sparkplugs P1340 when I see this it means wrong sparkplugs

Feb 23, 2013 | Cars & Trucks

1 Answer

I need keycode for ser.n m268376


I'm guessing you need the code for the radio. If this is what you needed I got back a code of 1236. This software I bought works about 90% of the time and cost me an arm and a leg so if this was or was not the right code please reply to this or email me at csautomotivecars@att.net to let me know if you don't mind. Just want to know I got my moneys worth. I hope it was right for you.

Sep 14, 2011 | 1997 Ford Escort

1 Answer

Where would you hook up a actron code scanner at inside an nissan infinftf g20 , 1992


You can find codes and download manuals for actron scanners from this website...

http://www.actron.com/product_category.php?id=249

Dec 18, 2010 | Nissan Z Cars & Trucks

1 Answer

Where can I get a manual/service records book etc... for a 2002 bmw 325i without paying a arm and a leg for one!


Ebay may have listings fot yours. they do cost a bunch anywhere I know but well worth it if you keep a car for many years

Feb 12, 2010 | 2002 BMW 3 Series

1 Answer

How to fix daignostic codes p0304, p0421 and p0455 efficiently without costing an arm and a leg.


P0304 is Misfire in cyl# 4. Check your ignition system and fuel system.

P0421 is Catilist effeciency. Fix P0304, if P0421 returns you will need a catalitic converter

P0455 is an Evaportive emission leak. Be sure you gas cap is tight and secure. If it is ok, then there is a leak in the system.

Aug 06, 2009 | 2001 Mitsubishi Eclipse

1 Answer

Code p1340


P1340 Igniter Circuit Malfunction (No. 8)
P1340 Camshaft Position Sensor B Circuit Malfunction
It all has to do with your ignition system or misfire.
You will need a special tool to remove this item. I would recommend taking it to a mechanic and having them fix it

Feb 07, 2009 | 2000 Isuzu Rodeo

2 Answers

2000 mazda mpv diagnostic box


There should be an OBD II plug under  the dash on the drivers side. It might have a cover over it so look real close. That actron will give you generic P codes.

Dec 28, 2008 | 2000 Mazda MPV

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...