Question about Ford E-350

2 Answers

I have flashers,turn signals parking lights but no brake lights

Posted by on

  • Jeremy W.
    Jeremy W. Nov 11, 2010

    year, make, model, engine size, and does it shift out of park?

  • wesleyfortun Nov 11, 2010

    where is the stop light switch located? if it's the one on the brake pedal I have done that already!

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

Check or adjust "brake switch" back side of brake peddel.

Posted on Nov 11, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,219 Answers

Have you tried changing the stop light switch ,or at least checking it with the multimeter ??to make sure it has a feed and a continuity when brake pedal pushed down

Posted on Nov 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987. Why is there no power at the turn signal cam?


Do you have brake and parkng lights? The turnsignal switch on the column is just designed to relay a path to the flasher and then it is designed to interupt the brake and some of the parking lights lights, which cause the flashing on and off. Double check fuses double check bulb socks and bulbs for good contacts. Does the 4 ways work? If the lights all flash then locate the turn signal flasher and switch with emergency flasher if possible to rule out relay. If those are all good and the emergency flasher lights work and bulbs, then you would have a problem with the turn signal switch. Hope this all helps

Feb 22, 2016 | Ford E-150 Cars & Trucks

2 Answers

No signals or flasers


Check fuse block. Electrical always boils down to fuses.

Feb 08, 2016 | Cars & Trucks

1 Answer

1991 Park avenue, Tail lights and license's plate light's stopped working turn signal's hazards and brake lights still functional. but no tail lights or license plate lights


Check for Power on your License Plate Light, more than likely you have lost GROUND

Turn Signals, Do the Front Work and the Back don't? If NONE then FLASHER FUSE

Apr 09, 2013 | 1991 Buick Park Avenue

1 Answer

I have a 1987 chevy deluxe r10 dont have any turn signal I have head light brake lights park light an hazard lights but no right turn signal nor left turn signal I have check all fuses and put a new signal...


I think you might have a separate flasher for the turn signals under the dash. The turn and hazard flasher would look alike. Turn you hazards on and find the flasher for it under the dash. You will probably be able to feel it working and hear it clicking. The other flasher under the dash is for the turn signals. Try replacing that one. I think it was in later years they began to combine the two into a single composite flasher.

Mar 01, 2013 | Chevrolet Cars & Trucks

1 Answer

Emergency Flashers totally out, Rear lights malfunctioning


Check the ground on the passenger side rear lights, it's likely bad. As for the hazards, sounds like a bad flasher or fuse.

Sep 03, 2009 | Ford Super Duty Cars & Trucks

1 Answer

Turn signals are not working


check for faulty signal light flasher located under L/S dash. Separate flasher for hazard lights and signal lights.

Mar 30, 2009 | 1994 Buick Park Avenue

1 Answer

No parking front or rear, side markers, brake or dash lights.


Sounds like an earth / ground wiring problem at the rear lighting units, when the flashers are on and you press the brake pedal the power is back earthing through the flashers. Check all earth/ground points at the rear lights.....Good luck hope this helps

Mar 26, 2009 | 1992 Jeep Wrangler

1 Answer

No brake lights of blinkers 1990 dodge dynasty


While not likely, it is possible that the light bulbs in both sides are have bad filaments. Turn on ignition key (but don't start engine). Then turn on parking lamps (first detent or "click" on headlamp switch). Walk around car and look for illumination on front parking lamps and rear tail lights. Turn on the right turn signal. Are those (right hand) lamps now changing brilliance? Try the left turn signal in the same manner. Are those (left hand) front and rear lights changing briiliance? Take note of any positions that did NOT change briliance when the turn signals were activated. If NONE changed briliance, you either have a bunch of bad bulbs (unlikely) or a bad flasher (more likely) or a bad turn signal switch (most likely) or perhaps wiring problems (possible if the car has been in a collision or has been "worked on" by some "non-expert" mechanic). Check the action of the emergency flasher control switch located on the steering column (facing up). Pushing it in (down) should result in the button going to two different heights alternately (low, high, low, high). You could just have bad flashers or corroded flasher contacts! Good luck!

Nov 15, 2008 | 1993 Dodge Dynasty

1 Answer

Signal and emergency ligths stop working


I would check the bulbs, first with just parking lights on - making sure all light - then to see if brake lights work.

If brake lights work, check you parking/signal lights, as they may be of the "two filament" variety. If this is the case, and they are not burned out, check to make sure that the FLASHER module works and that the button for the EMER FLASHER works.

If either is not working, neither will your turn signals, as they depend on the flasher module.

Good luck !!

Aug 13, 2008 | 1994 Ford Aerostar Extended

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...