Question about 2007 Chevrolet Uplander

1 Answer

2004 Chevy Venture. My battery light came on and I replaced the battery and it still came on. I took it to a local mechanic and he replaced the altenator and when I pick it up all of the lights on the dashboard were lit up so I left it for him to continue to look at. Then when I picked it up it appeared to be fine until I was driving for a couple of days then it happened again and then the battery which was 2 weeks old is totally drained. So again I brought it back. He replaced the computer and told me it was fine. So I am driving the car for 20 minutes and the same thing happens again, first the battery light comes on and then the abs and traction lights and the service tractions soon light as well. Please help I need advise I am running out of money.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 13,066 Answers

The BATTERY Light coming on is telling the charging system is not charging the battery . Take it to a qualified repair shop . The abs traction lights coming on are due to low voltage .The charging system in your vehicle is computer controlled ,don't know what kind of mechanic you took it to ? Take it to a Chevy dealer

Posted on Mar 21, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
salvidordali
  • 103 Answers

SOURCE: Transmission Traction "Off" light stays lit with Traction button

The traction control system is controlled through the Anti-lock brake system. The way it works is if one of your wheels starts spinning the ABS applys the brake to that wheel to transfer power to the oppsite wheel that is getting traction. If your ABS is bad then your Traction control won't work. To check it I would find a parking lot on a wet day. In an open space mash in the gas. if you hear the ABS system kick in and you don't squall the tires then your good. My guess is you won't. What I would be worried about is will my ABS work. When checking the traction control is a good time to check the ABS. Acclerate to around 15 mph, then mash the brake as your live depended on it. If you hear a motor run and feel a vibration or grind in the brake peddal, then it works.

Posted on Jan 09, 2009

  • 56 Answers

SOURCE: traction system light and abs light come on at same time

You still have issues with the speed sensors. The wires that connect to the hubs are known for failure.

Posted on Feb 13, 2009

  • 462 Answers

SOURCE: 2001 Impala Traction Activates unnecessarily

THE SPEED SENSOR IS LOCATED INSIDE THE HUB ASSEMBLY. THE TWISTED WIRES GOING TO THE SENSORS ARE PROBABLY AT FAULT. THE WHEEL SPEED SENSOR HARNESSES ARE AVAILABLE THROUGH A DEALERSHIP.

Posted on May 24, 2009

  • 50 Answers

SOURCE: Service traction system and ABS light

verify all tire pressures are correct this can affect abs traction control on your vehicle

Posted on May 31, 2009

  • 12744 Answers

SOURCE: 2001 impala- Traction, Abs, Brake lights on

abs sensor is built into hub[bearing]common problem when changing them and or brakes r that the sensor connection is not properly reconnected or wire got damaged recheck the sensor wiring and that connector is connected to clip by strut clip is part of system

Posted on Jul 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My light on my speedometer doesn't work. I have a 2004 chevy venture, which fuse controls that or could it be a bulb that's out


If all the rest of the lights in the dash are working, then it is the bulb. Just pull out the dash and replace bulb

Mar 10, 2015 | 2004 Chevrolet Venture

1 Answer

My 2004 Chevy venture smells like oil is burning??? What could it be and should I even be driving it, you can't smell it inside the cab but outside its pretty strong


Ask a local mechanic to diagnose the problem ,could just be a breather pipe come adrift ? but without a look myself i couldnt tell you

May 20, 2013 | Cars & Trucks

1 Answer

Replaced battery in 05 Chevy Venture, now nothing comes on. No lights, no attempt to turn over..nothing. Help??


first does he have battery cables tight and in right spot red cable goes to pos on battery and black cable goes to neg on battery and make sure nothing came unhooked or broke or loose on eletrical box

Nov 11, 2012 | 2005 Chevrolet Venture

1 Answer

2003 Chevy Venture: Battery light is on. Battery voltage tapers from ~12.45 volts on down when driven (I recharge it at home at end of drive). Battery is 10 months old. Took out 125A alternator. It...


Well it sounds to me like your alternator is bad, but the only way to know what is going on for sure is to take your vehicle to your local shop and have them preform a load test on your charging system. Most of the time the mechanic will do this for little or no charge because it only takes a few minutes. After this test is done they will be able to tell you for sure what is going on with no guessing. I hope this helps you out.

Aug 31, 2011 | Chevrolet Venture Cars & Trucks

1 Answer

How to turn traction control on a 2004 chevy venture.abs light is on but wheel bearing has been replaced


SERVICE TRACTION CONTROL and NO TRAC light comes on and off. Changed wheel hub and bearings, alignment, brakes, tires...HELP!!!

Jul 15, 2010 | 2004 Chevrolet Venture Passanger

2 Answers

2004 Chevy Venture will not shift into gear


Had neighbor look at this same problem. Turned out the shifter cable linkage near the top of transmission had popped off. They popped it back on and works but a bushing in the clip probably needs replaced. The neighbor rewched over engined top between firewall and engine and popped it back on.
Works fine but does needs a clip/bushing part and auto parts store has to get from Chevy

May 18, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

Have a 2004 Chevy Venture van with faulty power door locks. They will lock with the switch but will not unlock with the switch. Need schematics of the power door lock system. Thanks.


I don't have a solution, but a related problem. Our 2004 Chevy Venture power door locks are cycling (locking/unlocking) on their own while we are driving. This coincides with our remote keyless entry losing its effectiveness. I tried replacing the battery on the remote, but to no avail.

Mar 28, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

Hood latch


Try spraying the latch mechanism with WD-40 or similar light oil and operating the release cable a number of times. Check the condition of the release cable if nothing happens. The latch itself may have a broken spring due to the low temps.

Feb 03, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

Parking lights coming on by themselves


the switch is bad please replace same

Jul 30, 2009 | 1996 Chrysler Town & Country

Not finding what you are looking for?
2007 Chevrolet Uplander Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...