Question about 2007 Honda Accord Sedan

1 Answer

Changed the headlight and had to remove the battery and now the radio is not working

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

You will have to reinstall the radio code found in the owners manual with instructions

Posted on Nov 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When my head lights comes on in my 1997 lincoln town car the radio do a constant scan, just keeps scanning i have changed the light switch


The headlight wiring and radio wiring is getting in contact and causing the short.Both the grounds needs to be checked.Because when headlight is off,the radio work's fine.As soon as the headlights are turned on,the radio goes in scan mode.Its clear indication of radio and headlight wiring issue.The wiring's are getting in contact with ant metal surface or both the radio and headlight wire are coming in contact,where they should not.I suggest you to check the headlight and radio wiring diagrams for your lincoln town car.Here is the direct link.Click the link below :---Check out all the 3 links one by one.Radio wiring diagram for 1997 LincolnTown Car?http://technoanswers.blogspot.in/2012/02/radio-wiring-diagram-for-1997-lincoln.html
----------------Lincoln Town Car Radio stereo wiring?

http://technoanswers.blogspot.in/2012/02/lincoln-town-car-radio-stereo-wiring.html
---------Headlight wiring diagram for 1997 Lincoln Town Car?http://technoanswers.blogspot.in/2012/02/headlight-wiring-diagram-for-1997.html
----------This will help.Thanks.

Feb 13, 2012 | 1997 Lincoln Town Car

1 Answer

How do i change a headlight bulb in a 2007 city golf? and how long do i have after i pull the battery before the need the startup code?


The headlight bulb is inserted from behind, in the engine compartment. And there is no reason to remove the battery. But you only have a few seconds before the radio will need a code in order to work again, depending on the brand. There is nothing else that needs a code.

Jun 18, 2010 | 2007 Volkswagen Golf

1 Answer

My headlights on the car will not work..I revved the engine and all the headlights went out. I also noticed the radio staticked out when i rev motor also..could this be from the altenator surging???


The headlights and fog lights were burnt out. The battery was also boiling rapidly like a kettle...Hmmm i think the regulator is shot. I had to remove the altenator.(you can tell the engineers never tried to change one) What a terrible chore to remove the altenator, and find the maxi fuse...OMG if id only known Id bought a CHEVY .

Feb 14, 2010 | 1998 Ford Contour

1 Answer

Car will start lights, radio, etc, but engine


Try this:

Turn ON headlights and try to crank...

1. Headlights turn off completely means that the battery terminals need cleaning. Remove cables and clean clamps and posts.
2. Headlights have a noticable dimming means that the starter needs to be replaced.
3. No change in brightness. The headlights stay on, meand the starter solenoid needs replacing.

Oct 12, 2009 | 1984 Chevrolet Monte Carlo

1 Answer

I'm having a hard time replacing the driver side headlight. Am I overthinking this?


Why are you trying to change the headlight? Is it broken?
If you are trying to change the bulb, because it is burned out, that is done from the rear of the housing. You have to exercise a bit of care getting the old bulb out and putting the new one in, but is it not difficult. If you are removing the right-side (from the driver's position) bulb, remove the battery (make sure you have your radio anti-theft code if you have one of those radios). Reach behind the headlight assembly, grasp the bulb holder retaining collar, turn it counterclockwise, then pull out the bulb/holder assembly. To remove the bulb from the holder, simply pull it straight out of the holder. Reverse procedure to lock the holder into place.
Removing the headlight housing is somewhat more involved. There are five bolts that hold it in place.

Sep 27, 2009 | 1993 Honda Accord

2 Answers

Headlight Issue


No, you just might have to take out the battery. I was able to do it without taking the battery out, but only because I was being stubborn. There is one thing I definitely have to say is that you should change both headlights at the same time. My driver side headlight was the first one to go and I didn't listen and just changed that one, days later my passenger side one went out!

Mar 13, 2009 | 2004 Volkswagen Jetta

2 Answers

Replacing HID headlight in 2004 Acura TL


HID Bulb Replacement

A transient high tension (25,000 V ) occurs at the bulb sockets of the high intensity discharge (HID) lamps when the combination light switch is turned ON, it may cause serious electrical shock or electrocution if you do not observe the cautions below.

CAUTION:
  • Never turn on the combination light switch before fitting the HID bulbs to their bulb sockets and completing the reassembly of the headlight assembly.
  • Do not service the headlights assembly in wet conditions, such as rain or snow, near a sprinkler system, or when your hands are wet to prevent electrocution.
  • Do not touch the surface of the HID bulbs with your bare hands and do not stain it with any oils and fats.
  • Do not disassemble the inverter unit and the ignitor unit.
  • Do not turn on the HID bulb by using a power source other than the battery mounted on your vehicle.
  1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the XM radio channel preset. Make sure the ignition switch is OFF.
  2. Turn the combination light switch OFF.
  3. Disconnect the battery negative cable, then disconnect the positive cable.
  4. Remove the headlight assembly.
37a2a12.jpg
  1. Remove the Torx bolt using a Torx T20 bit.
  2. Turn the cover (A) 45 ° counterclockwise to remove it from the headlight assembly.
71b91a6.jpg
  1. Turn the socket (A) 45 ° counterclockwise to remove it from the bulb (B).
  2. Pull the retaining spring (C) away from the bulb then remove the bulb.
  3. Make sure the bulb harness (D) is routed correctly so it does not contact the reflector (E).
  4. Install the new bulb in the reverse order of removal. Make sure the notches in the bulb align with the tabs in the headlight.
  5. After reconnecting the battery, enter the anti-theft codes for the radio and the navigation system, then enter the customer's XM radio channel presets.

Feb 13, 2009 | 2004 Acura TL

1 Answer

2005 Honda Accord headlight replacement.


For the driver's side headlight, yes, the battery must be removed to change the headlight. There are three screws but they don't have to be removed, just loosened enough to where the bulb can rotate ninety degrees to pull out. Be prepared to reenter the radio code as disconnecting the battery will cause the radio to electronically lock out. The radio code can be found on the security card or inside the user's manual if you're lucky.

Oct 30, 2008 | 2005 Honda Accord

5 Answers

2003 sunfire wiring


I had that problem, and I thought it was the ground as well, but it turns out the splice in the wire harness sits at the absolute lowest level the bundle could, and it collects water. I opened mine up, and it was completely corroded. It appears there was a recall on this, but if you got yours used, as I did, you wouldn't have been notified.
I fixed that, but my fog lights are out now.

Jul 28, 2008 | 2003 Pontiac Sunfire

Not finding what you are looking for?
2007 Honda Accord Sedan Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...