Question about 1998 Oldsmobile Cutlass

1 Answer

I have a '98 olds cutlass sierra and the drivers side front door and rear door are in need of adjustment after a minor fender bender. How do I adjust these doors so they close right?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

If it was in an accident most likely adjustments will need to be done at a body shop that has a frame machine. Unibody structures make it very hard to do yourself. It sounds like a good hard hit in the front or a sid swipe you had

Posted on Nov 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Chevy Aveo in Minor fender bender now won't start


Minor fender bender ? Where , front , rear etc.... Could have damaged wiring harness , sometimes GM mounts the PCM - engine computer behind fenders , body parts etc...

Oct 17, 2016 | 2004 Chevrolet Aveo

2 Answers

Car wont restart after minor fender bender


this may be due to the battery check that whether it is in good condition

Jun 06, 2008 | 1997 Ford Taurus

Tip

Replacing door or hinges on a Ford Dodge Chevy Truck w/o removing the fender...


If replacing the hinges on a truck you always have a pain of a time re aligning the door. Unbolt the door/hinge bolts directly on the inside of the door first (not behind the fenders). The use a pencil to mark the outer edges of the actual hinges for alingment. This will allow you to set the new hinges in the exact same place as the original ones. When they are on start the 4 door bolts and tighten the very top and very bottom hinge (check for alingment). If set tighten the last two bolts or adjust accordingly. This way yo only have to do minor adjustment on the rear of the door bolts versus all bolts and saved time by removing the fenders to adjust the hinge/body bolts..

on Dec 06, 2009 | Ford F-250 Cars & Trucks

1 Answer

1993 Ford f150, driver's side door catches on the front finder when you try to open it


Fender needs adjusted. Loosen the bolts on top, pry the fender forward, hold it there and tighten the bolts. There should be about 1/4 inch gap between the fender and door.

Jun 28, 2015 | Ford Cars & Trucks

1 Answer

We have a 2006 Kia Spectra, the car was in a minor fender bender ( rear passenger side) and now the door locks keep clicking. The remote still locks the doors and they stay locked. If you lock them from...


The linkages or inside the door panel may have come off on the door lock. The best way to check the problem is to remove the panels and simulate the locking of the doors. You should see if there are parts that may have come off or had loosened up.

May 28, 2011 | 2006 Kia Spectra

1 Answer

1994 Honda Accord 4 door. Fender removal to adjust door.


Should have kept going-it's just screws or bolts, but some are almost hidden-like front of fender and rear along door opening. Take off fender lining and look some more.
I sort of know what you mean-can be hard to get to the door hinges. have you tried like a universal joint in your ratchet and socket?

Mar 13, 2017 | Honda Accord Cars & Trucks

2 Answers

Car won't start


should be a fuel cut off switch on drivers floor on door side.

Nov 09, 2009 | 2002 Hyundai Accent

1 Answer

Fender bender, bought new assembly. How to remove old for replacement? "89 seville driver side headlight.


LIGHTING Headlights REMOVAL & INSTALLATION
  1. Unscrew the Torx retaining screws and remove the headlight bezel.
  2. Remove the headlight bulb retaining screws. These are the screws which hold the retaining ring for the bulb to the front of the car. Do not touch the two headlight aiming screws, at the top and the side of the retaining ring (these screws will have different heads), or the headlight aim will have to be re-adjusted.
  3. Pull the bulb and ring forward, then separate them. Unplug the electrical connector from the rear of the bulb.
  4. Plug the new bulb into the electrical connector. Install the bulb into the retaining ring and then install the ring and the bulb. Install the headlight beze

Aug 23, 2009 | 1989 Cadillac Seville

1 Answer

Right Turn Signal not flashing.


quick fix,try to run jumper wire from solid lime green wire to tail light green/orange wire Your problem is no power

Apr 21, 2009 | Plymouth Acclaim Cars & Trucks

2 Answers

Seat adjustment


Passenger seats are usually manually operated from a latch or bar under the front of the seat. the seat back should have a lever between the door and edge of seat to make adjustment pull up on lever push back on seatback.

Jun 08, 2008 | 1990 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1998 Oldsmobile Cutlass Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...