Question about Nissan Pathfinder

1 Answer

2001 nissan pathfinder while driving at a constant speed say 60 mph could be any speed though as long as its constant it will all the sudden start shaking pretty rough, as soon as I let off the gas it goes away, then it will start again when I get to a constant speed again. when it is in drive but I'm sitting still it idles rough, service enginge light is flashing now also

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Hi!!
First thing to do is to find out the trouble codes stored in the PCM memory. Drive to an AutoZone, Checkers or similar auto parts store for a FREE code scanning. You'll get a print out with the codes numbers and description. Do that and get back to me. Thanks

Posted on Nov 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the drive cycle for a 2003 Nissan Sentra SE?


Take extra caution while performing dirve cycles on public roadways. Drive cycles can be difficult to follow under normal driving conditions. Begin by: - Start the engine. Idle the engine in drive for two and a half minutes with the A/C and rear defroster on. - Turn the A/C and rear defrost off, and accelerate to 55 mph at half throttle. - Hold at a steady speed of 55 mph for three minutes. - Decelerate (coast down) to 20 mph without braking or depressing the clutch. - Accelerate back to 55 to 60 mph at ¾ throttle. - Hold at a steady speed of 55 to 60 mph for five minutes. - Decelerate (coast down) to a stop without braking. If all other emissions systems are functioning properly, completing the drive cycle above will set the "readiness flags" required to pass the smog check. It will not hurt to perform the drive cycle 2 or 3 times before the smog test.

Oct 06, 2016 | 2003 Nissan Sentra

1 Answer

Tire shimmy between 60 and 70 mph in 2004 pathfinder


Nissan has a critical recall on the front strut towers on that year Pathfinder. Could cause steering problems even lose of steering, causing crash. If you havent had this fixed bring it too Nissan dealer immediately. They will provide loaner vehicle and in extreme cases when it is beyond fixing, Nissan is buying back the vehicles.

Dec 02, 2012 | 2004 Nissan Pathfinder

1 Answer

How do i do the drive cycle on a 1997 nissan pathfinder


The following drive cycle can be used as a guide to assist with re-setting monitors when a vehicle specific drive cycle cannot be located. This OBDII drive cycle begins with a cold start (coolant temperature below 122 degrees F and the coolant and air temperature sensors within 11 degrees of one another). This condition can be achieved by allowing the vehicle to "sit" overnight, and then by beginning the drive cycle the next day. Most drive cycles will be difficult to follow exactly under normal driving conditions, so the driver should exercise caution, road safety, and courtesy to others.
  1. . Start the engine. Idle the engine in drive for two and a half minutes with the A/C and rear defroster on.
  2. Turn the A/C and rear defrost off, and accelerate to 55 mph at half throttle.
  3. Hold at a steady speed of 55 mph for three minutes.
  4. Decelerate (coast down) to 20 mph without braking or depressing the clutch.
  5. Accelerate back to 55 to 60 mph at ¾ throttle.
  6. Hold at a steady speed of 55 to 60 mph for five minutes.
  7. Decelerate (coast down) to a stop without braking.

Sep 17, 2010 | 1997 Nissan Pathfinder

1 Answer

Noisie drive at 45 to 60 MPH


I'd be looking a the driveshaft ujoints.. Push and pull the driveshaft looking for any play at the cup areas.

May 18, 2010 | 1998 Nissan Pathfinder

1 Answer

Nissan pathfinder runs very slowly


check your catalytic converter could be clogged almost positive it is half clogged anyway.inspect the front side.

Jan 05, 2010 | 2001 Nissan Pathfinder

1 Answer

I have a 2001 nissan pathfinder 4w. The OBD system-readiness status: Says catalytic converters, NOT READY; oxygen sensors, NOT READY; evaporative system, NOT READY. So did not pass inspection, I was told...


You have to re-set the obd via using Nissan's approved drive-cycle which is;

1. Start the engine when the engine coolant

temperature gauge needle points to C. Allow

the engine to idle until the gauge needle

points between the C and H (normal operating

temperature).

2. Accelerate the vehicle to 55 MPH (88

km/h), then quickly release the accelerator

pedal completely and keep it released for at

least 6 seconds.

3. Quickly depress the accelerator pedal for a

moment, then drive the vehicle at a speed

of 53 to 60 MPH (86 to 96 km/h) for at least

5 minutes.

4. Stop the vehicle.

5. Accelerate the vehicle to 35 MPH (55 km/h)

and maintain the speed for 20 seconds.

6. Repeat steps 4 through 5 at least 3 times.

7. Accelerate the vehicle to 55 MPH (88 km/h)

and maintain the speed for at least 3 minutes.

8. Stop the vehicle and turn the engine off.

9. Repeat steps 1 through 8 at least one more

time.

If step 1 through 7 is interrupted, repeat the

preceding step. Any safe driving mode is acceptable

between steps. Do not stop the engine

until step 7 is completed. If you cannot or

do not want to perform the driving pattern, a
NISSAN dealer can conduct it for you.

Nov 15, 2009 | 2001 Nissan Frontier Crew Cab

2 Answers

The RPM of Nissan Altima stays high when drive over 65 MPH.


No....the rpms differ from engine to engine and from manufacturer to manufacturer. RPM's are always higher at higher speeds.

Aug 25, 2009 | 2002 Nissan Altima

2 Answers

Nissan Pathfinder (1994) keeps stalling.


try cleaning the throttle plates that can cause this

Aug 18, 2009 | 1995 Nissan Pathfinder

1 Answer

Clicking noise on 2006 Nissan Pathfinder between 20 and 60 mph


If u have hub caps remove them and see if the noise goes away.. Sometimes the hub caps aren't tight enough to the rim and move a little causing the clicking.

Jul 15, 2009 | 2006 Nissan Pathfinder

1 Answer

2006 Nissan Pathfinder 4WD tranny problem


does this happen between gear changes ?

Dec 20, 2008 | 1990 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...