Question about 1993 Chevrolet G20

1 Answer

I have 1993 Chevy van (G20) that has a leak. In efforts to locate the leak in need to simply remove my fan shroud, but it looks as if I need to remove my grille to do that. Is there an easier way to remove my fan shroud?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,585 Answers

You have a clutch fan on the water pump. big nut that is about 1&1/4 ". You will have to get a wrech that fits it and hit the wrench with a hammer counter clock wise to remove it. some times these don't come off to easy. keep hitting. Once it is loose it will spin off. you will have to take it out at the same time as the shroud. four bolts hold the shroud on.
Randy

Posted on Nov 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 Chevy van fusebox location


Donald, You did not state the model, so I posted the link for the models I found for chevy van fuse box. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Interior Fuse Box Location 1990 1996 Chevrolet G20 1994 Chevrolet G20...
Blown Fuse Check 1990 1996 Chevrolet G20 1994 Chevrolet G20 Chevy Van 4 3L...
fuse box diagram 1990 chevy astro van pdf 1 Docs Engine com
1990 Chevy van fusebox location Google Search

Jul 27, 2016 | Cars & Trucks

1 Answer

Is there a fuel pump relay on a 93 chevy g20 van and if so were is it located ?


25255316-j2drdyiro2z2m1qqe3onyzma-2-0.png


number 1 is fuel pump fuse
number 2 is bus bar positive +
number 3 fuel pump relay

hope it helps

Oct 24, 2014 | 1993 Chevrolet G20

1 Answer

My fuel pump stopped working. I don't here the pump running any more I have a 1993 chevy g20 van. what and how to check thanks BILL


Check the fuel pump fuse on the fuse block first because the fuel pump is located inside the fuel tank. It is the 20a (yellow) just above the fuse puller.

Jul 26, 2011 | 1993 Chevrolet G20

1 Answer

My 93 chevy g 20 vans air stopped blowing but when you move the switch you can still hear the compressor engage, before this happened it would come on and off if you slammed the door what could it be?...


Check blower motor. Compressor is doing its cold air work but you need the blower fan to get it into your can/van. You could simply have a loose connection. Follow the wires and try unplugging it and pluggin' it back in. Could also be a fuse or relay. When you say you slammed the door, sounds like a loose connection. Any wires hot or being pinched? See anything thing that looks melted under there?
Also, are you hoses connected to your vents under the dash???? That is easy enough to unscrew and check. Good luck

Jun 14, 2011 | 1993 Chevrolet G20

2 Answers

Where is computer located on95 chevy g20 van


not sure your set up on it but most are under the pass seat

Jan 19, 2011 | 1993 Chevrolet G20

2 Answers

Where is the fuel filter and pcv valve on a 1993 G20 van


Hi!!
PCV valve located under engine cover, top of engine, mounted in passenger side valve cover

Fuel filter is located Under vehicle, passenger side, below seating area, front of fuel tank, mounted on chassis DON'T FORGET TO RATE THIS POST!!

Aug 23, 2010 | 1993 Chevrolet G20

1 Answer

1993 chevy van g20 water pump replacement, what parts need removed to get to the water pump, and how to remove the serpentine belt


you will need some fairly long wrenchs 15mm-16mm to get leverage on the spring loaded serp tesiner put a wrench on the pulley near the belt ? also loosen the 4 fan bolts on the water pump before you remove the belt ? ther are 7 fan shroud bolts you can split the fan shroud ? 2 bolts on the lower right and 2 on the left ? after you do this then you should be down to pulling off the fan and pulley just slides off ? then remove the 4 waterpump mounting boltss, scrape the old gaskets ? when this is done all you have left is to installthe fan studs from the old pump? you do this by screwing down 2 nuts on the stud then with 2 wrenchs lock the nuts together ? then unscrew the bottom nut ? keep doing that till all 4 are replaced? install the gaskets and add some silicone and reverse the process ? hope this helps repost thumbs up !!

Aug 29, 2009 | 1993 Chevrolet G20

1 Answer

Will a 1993 chevy van G20 series trani w/OD fit in a 1984 chevy van G20 series w/out OD


93 is made to be mated to a fuel injected model with ecm that controls tranny,84 is still old school! best bet have old 1 rebuilt!

Apr 11, 2009 | 1984 Chevrolet Chevy

2 Answers

Electronic Control Module Installation 1994 G20 Chevy Van


I just had the same problem. If it is a regular van try under the driver seat in a plastic box. If it is a conversion van try in a pannel just behind driver seat on side of van wall behind a pannel that looks like a vent.

Dec 28, 2008 | 1987 Chevrolet G20

1 Answer

1987 Chevy G20 van replace power steering pump


Does your van have the serpentine belt? If so maybe I can help, I replaced the Power steering pump on my 90 G20 a couple of weeks ago. The trick is that you need to pull the pump pulley which is pressed on to access the mounting bolts which attach the pump to the engine. Harbor Freight tools sells a great tool designed for this job for $20.00. Once you have the correct tools, remove the serpentine drive belt. You may also need to remove the fan shroud. the pump shaft looks like it has an allen socket in the center, but this is for use in the manufacturing process, and will not come out. Place the puller tool on the pulley following tthe instruction that come with the tool, and remove the pulley. loosen, but do not remove the nut on the high pressure hose connection. use a pair of **** pliers to cut and remove the crimp clamp on the low pressure hose. If your pump has the remote reservour loosen the clamp on the reservour hose also. Remove the three mounting bolts, place a large pan under the pump to catch drips, and remove the prevously loosened hoses. there will be fluid leaking all over and the pump should come free, There are two types of replacement pump sold. With and without reservour. This reservour is a metal cover that fits over the back of the pump, and should not be confused with the reomte revervour found on some newer models which is next to the battery. This reservour is held in place be two throught the pump bolts which are removed at the back of the pump. If your new pump has a reservour you will probably still need to remove these bolts and put them in the replacement pump as most are shiped without these bolts. If you replacement pump comes without a reservour pull the bolts, the reservour should pull off of the old pump and slide onto the new one. check the o rings and replace the through the pump bolts. Installation is the reverse of removal execpt that 1/2" hose clamps replace the crimp clamps on the low pressure hose, and the puller tool is set up differently to replace the pulley. Finally if you don't flush contaminants out of the system your repair will last maybe a week. www.cardone.com has a great article about power steering flushing, read it before you start Good luck.

May 15, 2008 | 1987 Chevrolet G20

Not finding what you are looking for?
Cars & Trucks Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...