Question about Saturn SC1

1 Answer

Car will not start all lights battery fuses gauges starter cylinoid grounds check out just wont start i think its in the ignition switch itself everything comes on but when you turn it to the final start phse nothing no engine movement whatsoever

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Check all your pulleys on the motor. It may possibly be a bad ac compressor motor. There are by pass pulley kits you can buy at any parts store.

Posted on Nov 10, 2010

  • shane kellett Nov 11, 2010

    thanks all seems good im so set on it either being the park/neutral safety switch or the ignition switch but even taking the switch from the lock and key cylinder still get no response i turned the lights on and tried to start to see if it was drawing power and no dimming whatsoever so somewhere its not going to the final start phase on the switch tried cleaning contacts and even bent the pad to make sure the contacts where being made i get no response in anyway other than everything works dash lights light up and do not go away when key turned to start but the radio does dim

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 vw passat turbo wont crank or turn lights on


- Switch on the head lamps for 5 minutes.
- Keeping the head lamps ON, start the engine.
If the lights die,
- Check the battery terminals.
- Check battery state of charge.
- Charging system.
If the lights still glow sharply,
- Check fuses and relays in under the hood fuse and relay box junction.
- Battery to starter motor cable.
- Battery to engine ground and chassis ground cable.
- Solenoid on starter motor.
- Starter motor.
- Wiring.
-Ignition switch.

Mar 02, 2014 | 1999 Volkswagen Passat

1 Answer

Doesn't turn over or start


Five most likely causes 1. dead battery 2. faulty starter cylinoid 3. faulty ignition switch 4.loose connection at any of the points5 faulty starter relay. the battery can be removed and taken to most any parts store and checked. likewise with the starter/cylinoid. checking for loose or bad connections is pretty self explanatory. move from connection to connection and check for loose connections or corrosion. once you know your battery and starter are in working order (you should only be into this project for your time at this point) you can check your ignition switch and starter relays with a voltmeter and/or test light to identify where the current is stopping. hope this helps good luck!

Oct 15, 2013 | Mitsubishi Diamante Cars & Trucks

2 Answers

Replaced starter and ignition relays under hood on my 99 chevy silverado and to wont do anything no security light no nothing is on everything good on all connections replaced wiring harness...


Is power getting to the ignition switch? Do the warning lights and gauges come on when key is turned to on? That would verify power in and power out at the switch. Then you would need to check the start circuit. A single start wire comes out of the switch, the signal travels through the neutral safety switch and a starter relay and then to the starter solenoid mounted on the starter. Solenoid closes contacts so battery power can operate the starter. If new starter doesn't work, power has been lost between the ignition switch and the starter.
If no power to the ignition switch check maxi fuses, all fuses in fact, and possibly a fusible link from the battery that may be the feed for the switch.

Sep 22, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

Will not start,OR CRANK, NO NOISE


Do warning lights and gauges come on, when key is turned to on?
If yes, check for power on the small wire at starter solenoid mounted on the starter with the key held in start. If power at the solenoid, take starter off and test for a bad starter or solenoid. If no power at solenoid when key held over to crank, work back to the switch in the start circuit-starter relay, clutch or neutral safety switch,-power from the start wire out of switch is not getting to the starter solenoid.
If no warning lights or gauges work with key in on position, power is either not getting to switch (bad maxi-fuse or fuse link, or bad battery connections-clean and tighten, recheck)-or the switch itself is not sending power out. Check if battery is charged up. Check all connections and grounds for loose, poor connections.
The start circuit starts at the battery, then to ignition switch, then out of ignition switch on the start wire to the clutch switch (or neutral/park on automatics), and on , ending at the starter solenoid on the starter. Somewhere in your starting circuit, power is lost. Start at the battery-check charge, check connections, check ignition switch.

Aug 25, 2013 | Cars & Trucks

1 Answer

Truck wont start


replace battery cables could have bad ground cable.if see dash lights on when turn ignition to on position.check starter fuse or relay or remove starter check for faulty starter solenoid or starter.if starter okay and fuse starter relay okay ignition fuse and switch okay see dash lights could have problem in the theft security system need have vechicle code scan see if theft security fault code show up.

Jan 28, 2013 | 1998 Chevrolet Chevrolet silverado

1 Answer

1993 suburban is not starting and it is not the battery. What could it be?


IF BATTERY CABLES OLD THEY WILL CAUSE POOR GROUND HIGH RESISTANCE IN STARTER CIRCUIT CAUSING STARTER NOT TO CRANK ENGINE.CHECK TO SEE IF DASH LIGHTS AND GAUGES WORK WHEN YOU TURN ON IGNITION SWITCH IF NO CHECK IGNITION FUSES.IF FUSES OKAY IGNITION SWITCH IS OPEN NEED REPLACING.NOW IF BATTERY VOLTAGE IS 12.6 VOLTS, BATTERY CABLES GOOD AND IGNITION SWITCH AND FUSE OKAY. STARTER SOLENOID OR STARTER FAULTY.REMOVE STARTER TAKE TO ANY AUTO PARTS STORE THEY WILL TEST STARTER.TURN OFF RADIO BEFORE REMOVING NEGATIVE BATTERY SO YOU WONT LOCK OUT RADIO.

Nov 02, 2010 | 1993 Chevrolet Suburban

1 Answer

96 Olds Aurora wont start nothing happens when i turn the key,battery is good.


CHECK THE INSTRUMENT CLUSTER FOR POWER TO GAUGES TO SEE IF THEY WORK WHILE IGNITION IS IN THE ON POSITION.IF NO CHECK THE 40 AMP IGNITION FUSE.IF FUSE GOOD IGNITION SWITCH IS BAD OR HAS A LOOSE OR BROKEN WIRE.IF FUSE GOOD ALL GAUGES IS WORKING.I BE LOOKING AT STARTER AND STARTER SOLENOID.REMOVE THEM HAVE AUTO ZONE TEST STARTER.OR YOU CAN GET A REMOTE STARTER SWITCH AND SET OF BATTERY CABLES.HOOK BATTERY CABLES TO A BATTERY.WITH STARTER OUT OF CAR TAKE BATTERY CABLES HOOK NEGATIVE BATTERY TO STARTER BODY FOR GOOD GROUND.TAKE POSITIVE BATTERY CABLE HOOK TO STARTER POSITIVE TERMINAL WHERE POSITIVE BATTERY CABLE GOES.THEN HOOK THE REMOTE SWITCH RED WIRE TO STARTER POSITIVE TERMINAL AND THE OTHER REMOTE SWITCH WIRE TO THE S OR SWITCH TERMINAL ON STARTER SOLENOID.PRESS THE REMOTE SWITCH IS STARTER RUNS GOOD WITH NO FUNNY NOISES ITS GOOD IF STARTER DONT RUN THE STARTER SOLENOID OR STARTER IS BAD. THE PROBLEMS IN YOUR CAR COULD BE A BAD KEY TRY ANOTHER KEY YOUR CAR HAS THE THEFT DETERRENT MODULE SYSTEM BEST TO HAVE CAR SCAN TO CHECK THE THEFT SECURITY MODULE AND THE TRANSMISSION NEUTRAL SAFETY SWITCH IF ITS BAD STARTER WONT WORK.ALSO CHECK THE THEFT DETERRENT MODULE RELAY. BEFORE REMOVING BATTERY CABLES TURN OFF RADIO SO YOU WONT LOSE YOUR RADIO PLAYING CODE.

May 20, 2010 | 1998 Oldsmobile Aurora

4 Answers

My ford f150 wont start, battery is good, have a


On the firewall is the starter motor relay. There are 2 large battery sized cables to it, and 1 smaller ( 16 AWG ) wire that is orange or orange with a stripe ( forget the color, want to say white or tan ).

When you turn the key to the start position, check the smaller gauge wire for +12 V. The case should be ground. If you do not get +12 on the orange wire, try starting the truck in neutral ( apply the parking brake, chock the wheel, etc normal safety precautions ). Test for +12 V at the small wire. This is the output of the DTR ( Digital Transmission Range ) sensor or in common terms the Neutral switch. The start position on the ign switch runs through the DTR to the starter motor relay coil.
If you have a stick, the DTR is replaced by the Clutch Pedal Position Switch ( clutch must be pushed in to start ).
If you have power to this ( at the times the truck won't start ) next is to check the both battery cable ends to see if they are corroded and making intermittent contact ( not probable but possible ).

Apr 28, 2010 | 2000 Ford F150 Flareside SuperCab

2 Answers

Dodge dynasty wont star battery is good lites work


check for proper ground to body and engine, check for proper gauge of cables used.

Jul 18, 2009 | 1993 Dodge Dynasty

2 Answers

My car wont start


its possibly the cylinoid or the ignition try testing the starter, let me know if that works...

May 23, 2009 | 1993 Pontiac Bonneville

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...