Question about 1996 Acura TL Series

1 Answer

My Acura TL ?96 started having problems when the D1 and D2 positions of the gear were illuminating in the panel all the time. Few days later, the car would start when in P but need to use the Shift Release to move the gear. Later the same day the car won?t start in P so I need to use the Shift Release to move the gear to N and start the car. Also the key will stay stuck on the starter. I took out the plastic cover to check on the shift interlock solenoid because it stopped making the release sound when I press the brake but it seems to be working fine when jumped with a battery. The brake lights are also ok. Now the car will only start after moving the gear back and forth until the N lights up in the panel. The R light will start when in D and the car seems to jump from one gear to the other wildly. This had happened in the last four days and is getting worse. Any suggestion of what can be happening? Thanks in advance.

Posted by on

  • Anonymous Mar 31, 2014

    Car can shift into all gears but the vehicle doesn't move at all. No noise, no leaks, no movement.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acura Master
  • 14,585 Answers

Have the park/ neutral safety switch checked. this is most likely your problem.
Randy

Posted on Nov 10, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1779 Answers

SOURCE: 96 acura tl 3.2l is overheating+signals wont work

Start with the easy one (hopefully). You probably have to replace your turn signal flasher. It's located behind the dash, driver side of steering column in the relay block (just pull out to remove).
Your overheating problem: Are you losing coolant, or is the car just running hot? Any leaks, puddles?
Check the cooling fans to make sure they are kicking on as the engine temp rises. If not, you may have a bad switch that is not telling the fan to go on. If fan(s) are operating ok, check the thermostat. If it isn't opening properly, it could be the cause of the overheating. If you have a leak in the system, then when it gets too low, it starts to overheat. Many possibilities, So, let me know the answers to the above so I can help further if needed.

Posted on Jul 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Nissan Altima Stuck in First Gear


1. check transmission fluid level or if you can change the fluid & filter.
2. check throttle position sensor (tps).
3. if fluid level & tps are ok & still not upshifting automatically, temporarily (so you can take it to a transmission specialist) , try to manually shift. starting from dead stop, shift to D1. at about 25mph shift to D2. (be gentle on the accelerator & don't over rev on each gear. release accelerator pedal & don't step on the brakes while shifting from D1 & D2).

Apr 08, 2013 | 1995 Nissan Altima

1 Answer

Honda accord speedometer drop to zero


You may have a problem with your IPC (Instrument Panel Cluster) which often can be exchanged for a serviced and warrantied replacement unit.

First thing I would try...disconnect the battery for 10 minutes which will allow the on board computers to re-start.

If this doesn't help... I would retrieve any stored codes the on-board computer has logged which may provide a starting point to diagnose your trouble.

Aug 30, 2017 | Cars & Trucks

2 Answers

Acura 3.2 tl makes a noise when started in the morning in cold


that noise is 1 of your belts. there is 3 belts on it. and with the power steering noise I think it is your power steering belt needs to replaced or agjusted

Nov 11, 2012 | 2005 Acura TL

1 Answer

96 Acura TL ABS light comes on and off and causes the engine light to click on at a red light. Engine acts like it won't to cut out when the ABS light goes on and off. Whats wrong? FYI, ABS ligh


Any time you get any dash light ,you have the car checked
for codes within a day or two,not a year

You have had some type of failed system component
or issue for a year.

Sep 17, 2012 | 1996 Acura TL Series

1 Answer

Car starts and idling slowly and dies on an acura tl


short or loose lead on ignition coil take off clean spray wd40

Mar 22, 2012 | 2001 Acura 3.2TL

2 Answers

2004 acura tl not shifting stuck on 3rd gear and check engine light and VSA light comes on. but okay after engine shut off and start up again


Somehow it is effecting the TPS (Throttle position sensor) This is the only input to go to third to fouth and not seeing the proper gear change VSA light appears.

Mar 20, 2012 | 2004 Acura TL

2 Answers

IN THE SNOW PROBLEMS GOING UP HILL


As to any cars, when it snow, and going up hill there will be promblems, best way for the tl is turn on the vsa, put it in a low gear, like d1 d2.... and slowly press on the accelerator. Best solution is to stay away from hills until road has been trreat. Remember your Tl is only 2wd drive front wheel. It won't be able to handle like a 4wd or awd.

Jan 30, 2011 | 2005 Acura TL

1 Answer

Automatic transmission with shiftronic periodically when going into Drive goes to D1 or D2 on the console, stuck in low gear. A few days later the issue may go away. Just had the transmission rebuilt in...


dear friend-it looks like you have a dirty valvebody that is sticky,i would say that you can first try a additive to clean the valves and body,if no joy then you will have to remove the valvebody but take special care when stripping it.

Jul 30, 2009 | 2003 Hyundai Santa Fe

1 Answer

I have a '96 Acura TL 2.5, and I need to change out the starter. How do I go about doing this?


my 96 2,5 tl starts when it wants 2 i got a new batt and the alt is good i makes a click sound around the area by the starter and if i get a jump i starts right up how do i go about changing the sterter without breaking that seal on the intake it sits up under

Jun 24, 2009 | 1996 Acura TL Series

1 Answer

Cooling system problem


Had same problem with my 3.2L TL in 90C+ air temps last summer (2008). Dealership found an easy fix after much investigation - they hosed off debris that had built up on outside of radiator. No problems since, and the cleaning also revitalized the air conditioning which had been operating poorly.

Jun 13, 2009 | 1996 Acura TL Series

Not finding what you are looking for?
1996 Acura TL Series Logo

575 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...