Question about 1997 Mercury Mountaineer
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fuel filters can usually be found on the drivers side under carriage about middle of the vehicle. There should be a canister type filter with 2 metal lines connected to it. One on both sides of the canister. you will need to disconnect both lines and the bracket that holds the filter in place and install the new filter. I do suggest that you remove the fuel cap to try and relieve some of the fuel pressure built up in the lines before disconnecting the filter so you won't be sprayed too much with fuel. If you have any other questions please do not hestitate to ask.
Thank you for choosing fixya and please rate and comment about your experience today.
Posted on Dec 27, 2009
Testimonial: "great answer! Thank you very much."
Mercury Mountaineer fuel filter is located in front and on top of fuel tank behind two shields. . When you look just behind the front passenger side tire you will see the first shield. Behind that is the second. U will need to buy the fuel line release tools to get the lines off the filter, any good auto parts store will have these.
Posted on May 02, 2009
The fuel filter will be located under the driver side door tucked inside the frame rail. The filter should have 2 or 3 plastic clips you can pinch the end of the clips together and pull the clips right out.
I suggest replacing the clips because they get brittle and break easy. after you remove the clips you pull the fuel lines off. there will be pressure on these lines you can release the pressure by pushing the fuel valve stem located on your fuel injection rails underneath the hood either way you will have gas all over so dont do it while your engine is hot or near any flames, sparks or anything that will ignite the gas. (If you do not release the pressure be careful not to get gas in your eyes as it will spray for a secound or two).
After you remove the lines there may be a bolt on the outside of the frame rail you have to remove to remove the filter if not it will have a clamp around it and you just loosen it and slide it out. However on some models like mine there are not any plastic clips there are metal ones on the outside that clip onto the filter and the fuel line.
With ones like this there are metal retaining clips on the inside of the line as well it will take alot of force to pull them off and you will notice how there are two or three little metal pieces sticking out of the line, with a small screwdriver try to bend them back in if you cannot you will have to buy new ones from a autoparts store (orliley autoparts or advanced auto parts have them, the dorman part number is 800-017), they are called retaining clips, without them the lines will leak like crazy and you will not be able to drive, if you give up the new lines are available at the dealer for about 100 apiece and are about 6 hours of dealer labor to put in, so be carefull
Posted on Oct 07, 2009
it means the catalyst is worn out, the efficiency is monitored by sensors, when the Cat falls below a certain reading or "threshold" the code is generating telling u that u need a new catalytic converter.
Posted on Feb 18, 2010
For the 1997 Mercury Mountaineer V8 5.0L Engine:
Ignition Coil Connections:
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on May 01, 2010
Tips for a great answer:
Jan 16, 2017 | Mercury Cars & Trucks
Dec 20, 2015 | 1997 Mercury Mountaineer
Nov 24, 2015 | Cars & Trucks
Aug 10, 2010 | 2004 Mercury Mountaineer
Jun 11, 2010 | 1997 Mercury Mountaineer
Apr 16, 2010 | 1997 Mercury Mountaineer
Apr 06, 2010 | 1997 Mercury Mountaineer
Oct 18, 2009 | 2006 Mercury Mountaineer
Sep 30, 2009 | 2003 Mercury Mountaineer
May 02, 2009 | 2003 Mercury Mountaineer
913 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: