Question about 2006 Chevrolet HHR
First you must turn your wheel so you can access the inner fenderwell. Small hands will work best to access the bulbs.
There are 2 "plugs" or "grommets" and 1 screw and washer on the inside fender well.
These need to be removed. A 7mm socket works well for the "screw" (for lack of a better word--its not actually a phillips or regular screw head, but the socket will remove it easily). Use pliers or something else to loosen the grommets, or have new ones on hand and just cut these off.
Now that you have these off, pull the inner well plastic down just far enough to reach in and grasp the bulb. Turn the bulb left to free it from the housing. Replace with new bulb. Turn bulb to the right to tighten in housing. put the crew and washer back in and the grommet. You are done:-)
Posted on Nov 16, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 08, 2013 | 2006 Chevrolet HHR
Apr 06, 2012 | 2007 Chevrolet HHR Panel LT New Cars
Nov 30, 2010 | 2006 Chevrolet HHR
May 20, 2010 | 2008 Chevrolet Hhr
May 19, 2010 | 2006 Chevrolet HHR
Mar 29, 2010 | 2006 Chevrolet HHR
Jan 10, 2010 | 2006 Chevrolet HHR
Dec 01, 2009 | 2006 Chevrolet HHR
Jun 24, 2009 | 2008 Chevrolet Hhr
551 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: