Question about 2008 Toyota Avalon

1 Answer

How to set garage door opener - 2008 Toyota Avalon

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,993 Answers

Hi,

Find where the antenna comes out of the garage door opener motor and look for either a learn button or a set of switches. (You may need to remove the lens cover from the motor head). If the antenna is not found, look for a wall-mounted external receiver with antenna. It should also have a removable cover.

To program using the learn function, push the learn button on the garage door opener motor. An indicator light should turn on and glow steadily. You now have 30 seconds.

Press and hold the corresponding learn button on the remote. Stop once the motor light blinks instead of remaining solid.

To program a switch-type opener, again take the cover off of the motor unit or wall mounted receiver (wherever the antenna is located). You should see either 8, 9, or even 12 switches that may have two or three positions each.

Open the battery cover on your remote to locate the remote switches. For every switch on the motor, set the remote switch to the exact same position. Open = Off / Closed = On. This is where the pen or small screwdriver may come in handy for moving the switches.

Close the battery cover and test the opener. If all switches match, it should work immediately.

I hope this helps.

Good luck.

Posted on Nov 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Genie garage door op


There is a set button on garage door opener look at manual that is in the garage hanging. to make car and door work together you will need both manuals

May 16, 2014 | Lincoln MKX Cars & Trucks

1 Answer

2012 hyundai tucson setting the garage door opener that is located in rear view mirror


Thanks filter4991;
1. Press and hold button on car's rearview mirror
2. Press and hold button on garage door opener's remote control.
3. Light on Rearview mirror will flash rapidly.
4. Release both buttons.
5. Locate learning button on garage door opener (generally this can be found by tracing the antennae to where it is attached to the unit.)
6. Press and release "Learning button"
7. Press and release rearview mirror button repeatedly until garage door opens/closes but it should work the first or second time.

Worked on Genie Intellicode and Hyundai Tuscon

Sep 20, 2012 | Hyundai Tucson Cars & Trucks

1 Answer

How do i open the hood? How do we set the garage door opener to work?


the handle is a small square under the dash drivers side next to door jam if u open drivers door kneel on ground look under bottom of dash bam! there it is. to set garage door fold down drivers visor and u will see three small buttons pick one don't matter, now hold down your hand held garage door opener button(close to the visor) and one of those buttons u picked until flashing light starts flashing rapidly (20) seconds. thats it done !!!if this doesn't work i will have to give u the rolling code instruction, let me know

Mar 18, 2011 | 2004 Toyota Avalon

1 Answer

Attempting to set my 2002 suburban garage door opener with my remote opener how is this done


First you need to program the car with garage door remote, then program the garage door unit to the car. Hold Down garage door remote button and button of your choice in the car, the small light on the car will blink when it has learned it's code. Then press program button on garage door unit , within 15 seconds press and hold the button in the car that you programmed , when the the light starts to blink again, it should work.

Jan 14, 2011 | 2002 Chevrolet Suburban

1 Answer

Cannot program garage door transmitter


Depending on the type of vehicle home remote system you have and the type of garage door opener installed will determine how you program the system in your vehicle.
Below is a web address for the owners manual to your Buick. It will show you step by step how to set your Buick's remote system to open your garage door.
Good luck.
Regards,
http://www.extendedgmwarranty.com/owners-manual/buick/2007-Buick-Rendezvous.pdf

Sep 08, 2009 | 2007 Buick Rendezvous CXL SUV

1 Answer

'04 Nissan Altima can't be trained to open garage door.


Hello , you are probably not doing anything wrong. Some garage door openers will not accept some codes. My Toyota Tundra 2005 worked on my garage door , but my 2004 F250 would not. Quinn , Arizona

Jul 16, 2009 | 2004 Nissan Altima

1 Answer

Just moved, no garage remote, need to set the opener in my SUV.


The garage door opener is needed to use the HomeLink system that is in your vehicle. This design is so that no one can program theirs to gain access to your garage. You will have to obtain a working remote and it will have to be programmed at the garage door.

Jul 13, 2009 | 2004 Nissan Maxima

1 Answer

Need to program/link garage door opener with the one on the visor in the car


Depending on the name brand of the garage door opener, there is a button on it you press and you have about 30 seconds to set the button in the car to the signal. Read you car manual on how to set the visor opener, probably press and hold the button in after pressing the button on the garage door opener motor. Get someone to help you in the garage on a ladder. Mine is a Sears and this is how it works.

May 29, 2009 | 2006 Audi A4

1 Answer

Setting garage door opener


Most openers are programmed the same. You normally program the house garage opener to accept the new remote. Your garage opener will have a button to press to add in a new remote. Normally you press this and then press the remote in the car and hold until your lights on your opener flash or the garage door closes. (check your manual on your garage door opener)

Mar 27, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

2002 GMC ENVOY GARAGE DOOR OPENER


You have a quick fix item. There is a send code button on your garage door opener. You simply have to press that button, and within 5 secs, press and hold the button on the garage door opener (your car or other) until the opener rapidly blinks. The garage door and the opener will share info,,, and presto,, you can open by the remote opener. Take a peek at your garage door opener instructions. You can have up to three settings at one time... one for each button. I was asked if the buttons ever got the openers mixed up,, and the answer is absolutely not.

Jul 15, 2008 | 2002 GMC Envoy

Not finding what you are looking for?
2008 Toyota Avalon Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...