- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have the codes read at Autozone. Check out the wiring to the speed sensor on the output shaft of the gearbox. Be prepared to change the speed sensor itself. Is the speedo functioning? Often when the speed sensor is faulty the speedo dial fails
Hi The speedo drive is in the gearbox at the back, take off the cable and check the inner cable for breakage, spin the cable by hand rather quickly look at the speedo if it moves its the drive in the gearbox, if not its the speedo clock. To check the drive, take the drive out of the gear box, held in with one 10mm bolt, check for ware, if this is worn you can replace it but the problem is the gearboxlay-shaft it worn and the problem will re occur in a few months. Regards Steve.
very common fault with speed sensor in gearbox. fairly easy fix though some seize in which can be annying. tell a garage you want a new speedo switch should be bout £100 needs to go on a ramp for removal of sensor you need a new one 100 % Thanks Davelee
SPEEDOMETER (SPEEDO DRIVE) IS USUALLY LOCATED IN GEARBOX NORMALLY SCREWED IN SMALL BOLT YOU WILL PROBABLY FIND IT AT REAR END OF GEARBOX AS FOR RPM DIAL THAT IS USUALLY WORKED THROUGH CRANKSHAFT SPEED SENSOR BEFORE YOU GOCHANGING SPEEDO DRIVE MAKE SURE ITS NOT A BLOWN FUSE