Question about 1995 Toyota Camry

1 Answer

Hello. I have a 1995 Camry sedan..I'd been experienced this problem,which is,my car will slide a bit to the leftside if I'm not holding my steering wheel...I had sent the car for alignment,but still the problem is not solve...Can you plese help me solving this problem?Thanks a lot...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 14,585 Answers

If you have had an alignment and it's still there, take it back, they should have fixed it in the alignment process, or at least told you that you have other issues to address first. and not align your car.
I have done alignments and if there are parts that are to loose you can't do the alignment. Some times there are issues in the rear on the car that has to be fixed, they should have caught that too.
The purpose of an alignment is to make the car go down the road straight and not pull to one side, also to level out the steering wheel.
Randy

Posted on Nov 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I find a power steering hose layout for a 1995 Toyota Camry LE 2.2 ltr engine


THE P/Steering layout is from P/S/Pump the hose goes to the Rack and pinion and then the other hose returnes to the pump .

Jan 17, 2011 | 1995 Toyota Camry

1 Answer

Poor steering on my 1995 Toy Camry. How can I troubleshoot that?


Have you checked the power steering container, to make sure you have power steering fluid in it?
The steering will be feeling heavy, and hard to steer the car, if the power steering fluid is too low, or empty.

Jan 14, 2011 | 1995 Toyota Camry

1 Answer

WHAT WOULD BE THE BEST TIRE BRAND FOR A 1995 TOYOTA CAMRY?


Hello. Welcome to FixYa. Please allow us to assist you.

On my Camry, I have Nexxens fitted.

Personally, I feel that these are fantastic tires. Not much road noise, they hold the highway pretty good, and they wear nicely.

Choosing Nexxan tires is my recomendation.

Thanks for using FixYa for assistance.

Nov 11, 2010 | 1995 Toyota Camry

1 Answer

I have a 1994 Toyota Camry wagon that the brake lights do not work. I have tried replacing the bulbs, break light switch and nothing. Is there a common place that the wiring fails that I should check...


In the rear side panel there is a I believe it is white box that controls the brake lights. Remove the rear panel to gain access to this and check to see if you have voltage input when you have someone hitting the brakes. If so check to see if any voltage is going out. If not than the control box is faulty. Will need to get this from the dealership. Hope this helps. By the way it is the leftside panel I believe. That is where it is in the four door sedan.

Nov 04, 2010 | 1994 Toyota Camry

1 Answer

Where can i locate the power steering "stuff" in a 1995 Toyota Camry? The steering is hard one minute and smooth the next...


If the power comes on and off, in all probability it is not a mechanical failure. Seems like the belt that drives the steering pump is loose, and when extra power is required, such as in a tight turn, then it slips and stops providing power assistance. Poke the belt with a finger to see if it loose, and tighten it accordingly. These pumps do not require much power, and the belt does not require to be extremely tense. By trial and error, tighten it bit by bit until it stops slipping. Over tensioning will provoke a failure of the pump pulley. Also check if the pulley or belt have grease on them, because that will contribute to slipping.

Oct 11, 2010 | 1995 Toyota Camry

1 Answer

95 Camry LE Sedan high mount brake light


you should just be able to push down and pull back.

Mar 07, 2010 | 1997 Toyota Camry

1 Answer

Exchange ignition switch in toyota camry


Remove the lower portion of the dash, and the steering column shroud. Using a DREMEL tool, and a ut-off disc, cut s line in the bolts that holds the ignition switch in, deep enough to insert a flat-blade screwdrive; then simply remove the 2 bolts.

Jul 17, 2009 | 1995 Toyota Camry

4 Answers

I have to replace car battery (side mount) for saturn ls sedan .. how do i remove existing battery..nothing appears obvious ie. straps, bolts, etc...


Yes, the black box in front of the battery is in the way at first. It seemed like I needed to really force the box, but it slides up off the metal bracket that holds it. Once you get that off the bolt that holds the battery hold down is right there. I used large pliars, but I'm sure a socket set would be easier.

Seemed needlessly complicated. Cars with the over the battery bracket are much easier...

Jul 07, 2009 | 2000 Saturn L-Series

Not finding what you are looking for?
1995 Toyota Camry Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...