Question about 1995 Chevrolet Monte Carlo

1 Answer

Blinkers stop working when brake pedal is depressed brake lights to. flasher relay starts clicking super fast. why?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 528 Answers

You may have a bad ground wire or a wire with corrosion or rust on the connection (s). Try running a wire from a good ground to the black lead on your tail light harness. Test functions on the different sockets. If this cures the problem, inspect all connection in the ground circuit for corrosion ( green or white buildup ) or rust. When you find the problem, clean the contacts with a pocketknife or wire brush until shiny, then apply a small dab of dielectric grease to the mating surfaces. The grease will ****** the return of the corrosion or rust. Failing that, run a new ground wire to the affected lights and cut the old ground so it cannot cause interference.
Hope this helps!!

Posted on Nov 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 ford ranger


Ground wire or connection probably requires renewal.

Feb 27, 2014 | Cars & Trucks

1 Answer

My tail lights work blinkers work and flashers work but no brake lights


Will it allow you to remove it from park when the pedal is depressed, ie is the brake interlock functioning?

Mar 18, 2013 | 1999 Lincoln Town Car

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

2 Answers

Would a bad Flasher relay cause the brake lights not to work?


The flasher does not stop the brake lights from working. Check # 18 fuse in fusebox under lower left side of dash. if it's ok, the brake light switch, on the brake pedal arm is next. light green wire with red stripe is hot if fuse 18 is ok. Depress brake pedal, light green with no stripe should have power. if not, replace brake light switch. If light green wire has power with pedal depressed, combination switch under the steering is next. Remove the cover from around the combo switch {under the steering wheel}. depress brake pedal, light green wire should have power. If it does, pedal still depressed, orange with light blue wire & wire with light green & orange should have power. Those 2 wires are brake & rear turn signal wires. { The turn signal switch should be in the middle, not right position or left. while checking for power in the last 2 wires. Good Luck drvolt.

Feb 06, 2011 | 2004 Ford F250

1 Answer

No break lights, blinkers or hazzards. I changed the fuses. That wasn't it. Still No breaks, blinkers or hazards. Where is the relay?


I would check the turn signal/ hazard flasher module, its on the brake pedal bracket, 5 wires, turn the hazards on and give the side of it a few raps with a screwdriver and see if it starts flashing. The PINK should have 12v. If that checks out good it may need the turn signal switch. At the turn signal switch there is a WHITE wire that should have 12v when the brake is depressed, then you should have 12 on the DARK GREEN and the YELLOW wires coming out. If the center high mounted light works, then the brake switch at the pedal is good.

Nov 19, 2010 | 2002 Pontiac Sunfire

1 Answer

2000 Jeep Grand Cherokee, I had blinkers and flashers no brake lights, and after checking the bulbs in the light itself I dont have blinkers or flashers at all


Just no turn signals in the back now? Maybe didn't install the bulbs tight back into the asm? No brake lights...do the lights work with headlights on and just no illumination with the brake pedal depressed? Could be brake light switch.

Oct 01, 2010 | 2000 Jeep Grand Cherokee

1 Answer

The blinker clicking sound won't stop when blinkers are off


Hello, you need to replace the flasher. It is located under the dash on the driver's side near the top of the brake pedal.


Thanks for using FixYa!

Feb 01, 2010 | 2004 Pontiac Grand Am

1 Answer

2001 Olds Silouhette - The blinker on the dash blinks quickly


NO PROBLEM TURN ON THE RIGHT BLINKER THEN WALK AROUND THE CAR MAKE SURE FRONT AND REAR BULBS ARE FLASHING... IF YOU HAVE A BULB OUT YOU WILL NOT OFFER ENOUGH OF A LOAD TO THE FLASHER... WILL CAUSE IT TO FLASH FAST... IF OK THEN MAKE SURE THE PROPER BULB NUMBER ON BULBS AND MAKE SURE CORRECT BULBS USED IN VEHICLE.... IF OK CHANGE FLASHER

Aug 31, 2009 | 2001 Oldsmobile Silhouette

1 Answer

Driver side rear blinker/stop light does not work, also 3rd light stop light isn't working either


may be a bad electronic flasher unit if you lost both. if the blinkers flash very fast, that is a bulb out warning, but sometimes the flasher controls both circuits, and it is a relay.

Jul 22, 2009 | 1999 Ford F150 Regular Cab

3 Answers

99 Rodeo Right turn signal makes brake lights blink


could be both unrelated issues at the same time

worn indicator stalk
faulty relays

adjust or test the brake pedal stop light switch

Mar 22, 2017 | 1998 Isuzu Amigo

Not finding what you are looking for?
1995 Chevrolet Monte Carlo Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...