Question about 2004 Nissan Quest
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if this is an automatic there will be a dip stick if it is a manual you do not use transmission fluid to find out what sencor is bad take car to advance auto parts they have a digatal reader and can tell wou what sencer went bad and where it is located
Posted on Dec 05, 2008
SOURCE: cd stuck in cd changer
this is going to ruin your CD or at least make it skip, this has happened to me countless times in my car. All you have to do is get a pair of needle nose pliers grab the CD and pull it out, unless you have a multi-disc changer the CD will be in front right where you put the CD in
Posted on Jan 30, 2009
Try taking rubber air intake off front of throttle body, and spray WD-40 inside throttle body with plate opened up , for a second or two, stand away, or get in vehicle then try to start & see if it starts & runs for a second or so. If it does, then you have a fuel delivery problem, which I'm guessing it is, if no hum sound at rear when key cycled just to on, not start.
Posted on Feb 28, 2009
If it's a cheap aftermarket alarm, check for a red wire coming off the hot side of your battery with an inline fuse. If it's not, try to locate the alarm "computer" under the driver's side dash or nearby your fuse panel. You'll find a black box with a wiring diagram glued to the side, normally strapped to a wiring harness or other fixed element. If this is the type of alarm you have, you'll need to trace each wire coming from the alarm computer and unclip each fastener that's clipped to your vehicle's factory wiring. The trouble with these types of alarms is that they tie in and get power from a number of sources (stereo, interior lights, etc.), so you'll have to trace and unclip 8-12 wires to fully disengage. Good luck!
Posted on Jun 12, 2009
Tips for a great answer:
Oct 04, 2015 | 2005 Nissan Quest
Jul 01, 2015 | 2005 Nissan Altima
Jan 07, 2011 | 1994 Nissan Quest
Dec 22, 2010 | 2000 Nissan Quest
Mar 09, 2010 | 2004 Nissan Quest
Jan 27, 2010 | 2004 Nissan Quest
Aug 18, 2009 | 2004 Nissan Quest
Apr 13, 2009 | 1994 Nissan Quest
Feb 28, 2009 | 2002 Nissan Quest
110 people viewed this question
Usually answered in minutes!