Question about Hyundai Excel

1 Answer

Hello, Ive damaged the quater panel of my car, I would like to take that part of and put my non- damaged part on. i would just like to know the details of how to take it off and put it back on. --1999 Hyundai Excel Sprint--

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 76,673 Answers

The quarter panel must be cut off with a special air chisel with a metal cutting bit and then the new part spot welded back on, this is not a job you can do at home, a takes a trained body technician to perform this repair, to buy the equipment needed to do this job would exceed the cost of having a body shop do the job, and then there is the paint and prep work after the part is spot welded on. I advise against any attempt by an unskilled person to attempt this job.

Posted on Nov 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Terrano running ruff when under quater of a tank diesel


Depending on your year it could be a weak lift pump not being able to lift the fuel to the injection pump, in which case the injection pump will be quickly damaged as it relies on a steady flow of fuel to lubricate and cool it.
on older models there may be a break in the pickup line inside the tank. Suggest you keep tank above quarter full at all times until you decide what to do..replace lift pump or remove tank and check pickup......

Apr 08, 2014 | Nissan Terrano Cars & Trucks

1 Answer

Water getting into quater panels near rear hatch on 2000 chevrolet blazer


There are flapper valve drains on the 1/4's, clear them.

Jun 16, 2012 | Cars & Trucks

2 Answers

A neighboring car pushed a shopping card into the rear portion of the front drivers side quater panel -- that 6 to 8 inch portion behind the wheel-well. It's pushed in up to 1 1/2 inches max and 8 -10...


you can try removing the quarterpanell,& straightening it,but you are better off getting the offending neighbour to pay a body-shop to fix it Taking the door off is very involved &you will have to re-attach it, (not easy)

Apr 09, 2011 | 1997 Subaru Outback

1 Answer

1994 toyota carolla with big dent on driverside back quarter panel, is it one big piece or is it a quater panel?


Quarter panel , it's quite a job. Ask the body guy to show you your car when he's in the middle of the job.. You will have a better understanding ..

Jan 03, 2010 | 1994 Toyota Corolla

1 Answer

2007 quarter panel


Any body shop has a great big book with those pics in it. Say pretty please.

Jun 15, 2009 | 2007 Cadillac SRX

1 Answer

Intermittent problem will not start /fuel pump system problem


if you run it under a quater tank you will continue to replace them the fuel keeps them cool and lubricated i know it sounds weird but its true ive bought 2 in as many years at600 a pop keep it @ a 1/4 to 1/2 and you shouldnt have to replace it again after this time

Nov 19, 2008 | 1996 Chevrolet Astro

1 Answer

1999 corvette c


Very easily, take off the passenger side tailight (outter) two screws/torque bit. Once you have done that reach in on the inner quater panel you should be able feel the antenna....... (To remove anntenna). From the outside of the anntenna on top where the actual anntenna comes out there is a ring silver or balck. You should be able to twist (unscrew) that ring to loosen the antenna and two more on the in side of quater panel. The anntenna should drop from the inside of the quater panel. Hope this helps!!

For visual instructions go to: #17

http://forums.corvetteforum.com/c5-tech/1817090-the-ultimate-diy-thread-with-pics.html


Aug 02, 2008 | 1999 Chevrolet Corvette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...