Question about 2008 Ford Edge

1 Answer

Liscense plate fuse location - 2008 Ford Edge

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

Welcome to FixYa!

On the link below is the owners manual for the edge page 258 slot # 22.

If it is just the license plate light that is out I would check the bulbs. The reason why is that the license plate light is on the same cerict as the parking lights.

http://www.motorcraftservice.com/pubs/content/~WO8EDG/~MUS~LEN/40/08edgog1e.pdf

Good Luck

Posted on Nov 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The fuse for the liscense plate light


is the same fuse for the tail lights
If you have tail lights then there is a wire in the bulb holder fault or a blown bulb

Dec 07, 2015 | Cars & Trucks

1 Answer

Which fuse is designated for liscense plate light 2003 town car


Should be the same fuse as the rear/tail lights.

Apr 01, 2015 | 2003 Lincoln Town Car

2 Answers

Lights out on License Plate. Changed bulbs. Still not working and back lights unless stepping on breaks or putting in resevre.


very common problem, the light sockets are corroded and require replacement. call your local ford dealer and they will have the parts in stock. good luck

Jan 23, 2011 | 2000 Ford Focus

1 Answer

How to change liscense plate light? se model


hi, if your license plate bulb cover has no screw holes in it then the chances are its just pushed in it may be a very tight fit but should just pull out its usually held in by two plastic clips that lock once its pushed in so using a screw driver to lever the light cover off should get it off.

If you have a cover on the inside of the boot that covers the wires going to the number plate bulb you may be able to take this off and then be able to see how it comes off.

Let me know how you get on or if you need further assistance ok

Dec 28, 2009 | 1997 Nissan Pathfinder

3 Answers

No backup lights and no light over the liscense plate where is the fuse located


Depending on your make the fuse panel is in 1 of 3 places....

1. When you open the driver side/passenger side door theres a pannel you have to remove, It may or may not say Fuses

2. Under the dash on the driverside behind the foot pedals

3. Under the hood (drivers side)

also being all the lights that are malfunctioning are in the rear (breaklights, tail lights and LP lights) after you check your fuses if the problem is still there, check the ground cable from the tail lights, if it was pulled/severed/or rusted apart this will have the same symptoms

Sep 27, 2009 | 1996 Ford Contour

1 Answer

Front Liscense Plate looks stupid on my 2003 Bonneville


go to like walmart, target, etc and you can buy a backing mount that you secure to the bumper, and then secure your plate to the mount. They're like $5-10

Aug 21, 2009 | 2003 Pontiac Bonneville

1 Answer

I have no Running Lights in both the front (Amber), or the back Tail Lights (Red), no liscense plate lights, back-up lights or instrument panel lights. I do have Brake Lights, turn signals,...


1st check the fuses-----then the globes-----check all the fuses some have multiple tasks if you have a test light ,youcan test to see if thre is power on one or both sidesof the fuses with the lightswitch on.if thre is no power there the swich is the next place to checkfor power to those items not working. i cant remember if there is a relay on those ,but look for one

Jul 27, 2009 | 1996 Isuzu Rodeo

Not finding what you are looking for?
2008 Ford Edge Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...