Question about 1993 Lincoln Mark VIII

1 Answer

How to change idle air control - 1993 Lincoln Mark VIII

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,168 Answers

Hello Grandwazzoo.

Actually a very easy change on the Lincoln
Undo the 2 wire connector, the 2 retaining bolts, the gasket if it sticks to the intake.
Avoid getting any dirt into the openings.

It will configure itself after running the car for a while.

The control valve is located at the rear top of the engine.
Here is a diagram pointing it out.
how to change idle air control - kiltylake_0.gif

There you are, I hope your repair goes well.
Thank you for using FixYa.

KL

Posted on Nov 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I adjust idle on 2009 Toyota Corolla 1.8 liter


There are no provisions for adjusting the idle . The computer through the use of the IAC valve - idle air control controls the idle . There is a base idle set at the factory an should not be changed or messed with . What idle problem are you having ? low or high Could be IAC valve or air passages plugged . High idle the throttle plate could be gummed up an sticking ! If you were to change the base idle you cause check engine light problems .
How To Fix Car That Idles Poorly

Apr 20, 2017 | Toyota Cars & Trucks

1 Answer

Have a 2001 diamante originally had a low idle. Changed the idle control, spark plugs, plug wires, rotory cap. Also changed all vac hoses. Now am having a high idle when warmed up. How do I fix


What do you mean you Changed the idle control ? You changed the IAC - valve ,idle air control valve ? Did you do a relearn ? Or did you change factory preset idle ?

Jan 18, 2017 | Cars & Trucks

1 Answer

High idle o n a 1996 chrysler concorde. have change the tps and the idle air control valve. i think its a vacum line but i dont know which one. which one s effect the idle


High idle is usually caused by a vacume leak. First place to check is the cold air intake manifold. All hoses, throttle body, and sensors. Throttle Position(TPS), Mass Airflow(MAS), Idle Air Control Motor (valve) IAC. Controls Idle speed

A malfunctioning throttle system can cause both a high idle as well as an engine stall.

A dirty air intake or cracked air intake tube is often the culprit.

How to Fix an Engine High Idle in Under 15 Minutes

Oct 16, 2011 | 1996 Chrysler Concorde

1 Answer

The fuel pump was changed,now it idles high.


The idle speed is controlled by an Engine Control Module (ECM).
It needs to be put on a computor to be checked.
The idle air valve provides the control for constant idle speed. In order to set the correct air valve opening to achieve constant idle speed, the fuel injection control unit uses information from the air mass meter, A/C switch, throttle valve switch and the ignition control unit (RPM signal) to regulate the output current to idle air valve. This means, there is alot of things that can make the idle speed go up or down...Hope this was some help to you??

Jul 21, 2011 | 1990 Volvo 740

1 Answer

I have a 1996 mercury mystique with a 2 liter and the car idles high and when i put it in gear it idles low and dies...i have changed the throttle positioning sensor, idle air control valve, mass air flow...


Wow you change everything, TPS was right thing to do and so is the Idle air control,and MAF and EGR, fuel pressure, So it idles high then some one tried to defeat the stall in gear? Even if there is a vacuum leak creating high idle it shouldnt stall in gear, , What color is the transmission fluid? when in gear in drive step on the acelerator pedal to maintain idle to prevent car from stalling. Just enough to maintain let say 1100RPM. Is there a vibration? I mean a torque convertor vibration. Torque convertor stall are common an GM and Nissan,very rare do I ever see it on Ford. I really belive the IAC is not getting power and is just been adjusted manually, cause I know its not the transmission, At idle in gear pull the plug on the idle Air control does it change in idle setting? If it doesnt change in Idle setting the adjustment that was use to control the setting lower the idle to its normal setting. Plug the idle air control in then.The idle air should change the setting. If it doesnt its not getting the signal it should.

Apr 29, 2011 | 1997 Mercury Mystique

2 Answers

In my 2000 Saturn SL1 I am experiencing very high idle (2000 rpm warm - higher cold). I have cleaned the throttle body and the idle air control valve with no improvement. What next, replace the idle air...


You could try replacing the idle air control valve but I would obtain one from a local salvage yard, its cheaper and you are not certain if thats the problem, another thing i would check is your intake manifold gasket where it meets the cylinder head, if tha gasket is cracked or leaking it will allow excess air to enter the engine and make it idle higher, the easiest way to verify this is get a can of carb and choke cleaner and spray it all around the intake gasket area, if the engines idling characteristics change drastically then the gasket is bad and needs to be replaced if theres no change in the idle I would start looking for vacumm leaks and the idle control valve issue, which you specified.

Jul 03, 2010 | 2000 Saturn SL

2 Answers

Replacing Idle Control Valve on 97 Pathfinder, need help!


it's on the throttle body. Here's a Quest with same 3.0L engine. These often need cleaning with carb or throttle body cleaner

Idle Air Control (IAC) Valve When the engine (6007) is running but not at idle, the throttle valve controls the amount of air admitted into the engine. The powertrain control module (PCM) (12A650) increases the fuel injection output in proportion to the increased airflow to achieve the appropriate air/fuel ratio. During idle, the throttle valve is almost fully closed. It is therefore necessary for the idle air control system to supply air for combustion during idle. The idle air control (IAC) valve allows a metered amount of air to enter the intake manifold (9424). The camshaft position (CMP) sensor detects engine speed and sends a signal to the PCM. The PCM sends a duty cycle (On/Off) signal to the IAC valve which allows additional air to enter the intake manifold. Air is added by the IAC valve to maintain the set lowest idle speed at which the engine can operate. The idle speed adjusting screw allows adjustment of the airflow into the intake manifold.

0cb8ac7.gif
Fast Idle Control (FIC) Solenoid The fast idle control (FIC) solenoid helps maintain a constant idle speed while the air conditioning is operating. When the air conditioning is turned on, the front climate control panel sends out two signals. One signal is sent to the powertrain control module (PCM) (12A650) to engage the A/C compressor (19703). The second signal is a ground signal sent to the FIC solenoid relay, to engage the FIC solenoid. The FIC solenoid supplies additional air to adjust the increased engine load.

May 27, 2009 | 1997 Nissan Pathfinder

2 Answers

Idle air control


all the sudden the check engine light came on and it started to idle funny and dying at stops. I had a diagnostic done on it and changed out the idle air control valve but it doent seem any different. and the check engine light is still throwing the same code. we adjusted the idle up so i could drive it with out it dying but it is still acting funny.

Sep 19, 2008 | 1997 Mitsubishi Galant

2 Answers

My 1988 old 98 surges up and down at an idle,i replaced the maf sensor but it did nothing


try changing ur air idler control valve i had a 3.8 that di the same thing till i changed the air idler control valve

Jul 29, 2008 | 1990 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1993 Lincoln Mark VIII Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...