Question about 1997 Pontiac Bonneville

1 Answer

HI WHERE IS LOCATED FUEL SENDING UNIT FOR A PONTIAC BONEVILLE SSE 1997? SOME PEOPLE IT SAYS IN THE TRUNK, OR DO I HAVE TO REMOVE THE FUEL TANK? THANKS.......

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 381 Answers

Well the sending unit is definitly in the tank. However you might be able to get to it though the trunk without removing the tank. I would move the carpet in the trunk around and you might find an access panel to allow you to get to the top of the tank without removing the tank itself.

Posted on Nov 10, 2010

Testimonial: "THANKS"

  • David Ward Feb 01, 2011

    you wont find access hole in floor you will have to drop tank i have a buick that i made a hole in floor to get to it but u have to be carefull you cut a hole in tank

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel pump located, for a 1991 Nissan Stanza


Fuel pump is located inside the fuel tank. Look in trunk under rug or Remove the back seat and under it you should find an access cover to get to the fuel tank sending unit. (the cover will be SCREWED in place). Remove cover, remove the sending unit and the fuel pump is installed on the sending unit

May 02, 2015 | 1991 Nissan Stanza

2 Answers

I have a 1997 Pontiac Grand Dam GT 2 door coup, And I need to know the fuze that controls the gas guage is located? and what the number is on the fuze?


The fuel gauge is not fused separately. If the gauge is not working you likely have a defective fuel level sending unit inside the fuel tank.

Oct 04, 2012 | 1997 Pontiac Grand Am

1 Answer

How do i replace the fuel level sensor on a 2005 kia sorento


What You'll Need:
  • flat head screwdriver
  • Phillips head screwdriver
  • hammer
  • open end wrenches
  • replacement fuel tank sending unit
    Before you begin, disconnect the negative battery cable to be sure no electrical sparks are possible. You're dealing with gas which is highly flammable!Your fuel tank sending unit is located in the top of the fuel tank, but is accessible under your back seat (or under the carpet in your trunk) on some models. The sending unit will be protected by an access cover, usually held on with a couple of screws. Lift your back seat or trunk carpet and locate the access cover for your fuel tank sending unit. Remove the screws holding the cover in place and remove the access cover to reveal the fuel tank sending unit.
    Safety Note: Gasoline is highly flammable. By removing the fuel tank sending unit, you are opening the gas tank. Be sure there are no sources of spark or flame nearby.
    With the access cover removed, you'll see the fuel tank sending unit right there on top. It will have a wiring harness plugged into the top (this tells your gas gauge how much fuel is in the tank). Unplug the wiring harness and move it safely to the side. If your fuel tank sending unit is screwed or bolted in place, remove the screws or bolts. Some sending units are a "twist-lock" type. They work like the old twist-lock gas caps. You'll see a few notches along the outer ring of the sending unit. Place the tip of a sturdy flat head screwdriver in the notch and gently tap it counter-clockwise. The sending unit will rotate until it's loose. (the picture above shows the fuel tank out of the car to illustrate the fuel tank sending unit's location). Now you can remove the fuel tank sending unit in one piece. Attached to it is a long rod with a float at the end, so you might have to try a couple of different angles to get it out. As usual, installation is the reverse of removal. Don't forget to plug the new sender in or it won't send you anything!

Jun 22, 2012 | 2005 Kia Sorento

2 Answers

Fuel gauge non Digital car does check system then while sitting it goes from full tank to empty and no reading's in between.


This problem is caused by a defective fuel gauge level sending unit, the sending unit is located inside the fuel tank and is part of the fuel pump assembly (known as the fuel pump module) and not sold separate from the fuel pump. To replace the fuel pump module you must remove the fuel tank from the car.

Apr 19, 2011 | 2004 Pontiac Grand Prix

1 Answer

My boneville sse 1997 brake light wont stay off why


I would check to make sure the emergency brake is fully released. Also check the brake fluid level.

Jun 02, 2010 | 1995 Pontiac Bonneville

3 Answers

Fuel pump location?


if you open your trunk and look in the far right of the trunk you will see a bulge carefully remove the carpeting out of the way and you will see a lid with five screws remove them and tada you have foubd your fuel pump easy as pie to find and replace also althoug unconfortable

Oct 02, 2009 | 1997 Buick Riviera

2 Answers

Pontiac Bonneville(2000) oil pressure sending unit


The oil pressure sending unit is located behind the oil filter, Threaded into an aluminunm housing. It has wiring that plugs into the sending unit. The oil filter has to be removed and you will need a deep well socket and a 6 inch extension. Change the oil and the sending unit together.

Jan 24, 2009 | 2000 Pontiac Bonneville

1 Answer

1998 dodge stratus fuel pump


Hello
If you have done a in tank one before this will go easy
drop the tank
remove the fuel lines
remove the electronic connector.
remove the ring from the tank that holds the sending / fuel pump unit into the tank.
replace the pump on the sending unit,
reverse steps to install
RD

Jan 12, 2009 | 1998 Dodge Stratus

Not finding what you are looking for?
1997 Pontiac Bonneville Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...