Question about 1992 Oldsmobile Cutlass Ciera

3 Answers

Need to pull the harmonic balancer. Do i need a puller 1992 cutlas ciera c with 3300 v6.

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 2,002 Answers

Yes. You always need a puller for the harmonic balancer. Never try to remove it without a puller. You may be able to rent one at the auto parts store or borrow one from a friend. Hope this helps.

Posted on Nov 09, 2010

Testimonial: "Thanks for the info."

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 14,585 Answers

Yes you do.

Posted on Nov 09, 2010

Testimonial: "Thanks for the info"

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Depending on the puller you have you may need to insert a socket into the cylinder of the harmonic balancer to extend the range of the puller tool. You can retrieve the socket with a telescoping magnet tool. A torque wrench is also beneficial in the process.

Posted on Feb 20, 2013

  • saleetha williams Apr 30, 2013

    what and how can i remove the socket i broke into the harmonic balaancer

  • Kelly Sterling
    Kelly Sterling May 01, 2013

    Get a telescoping magnet. That is what we had to use when the socket detached.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Harmonic balancer removal on 2004 sonata v6


the pin is a line up pin for the balancer it does not hold the 2 together if the balancer is stuck you may have to use a puller to remove it

May 01, 2012 | Hyundai Motor 2004 Sonata

3 Answers

How do I take off the harmonic balancer on a 4.0 liter engine


You will have to take the belt off and then take the bolt out of the center that holds it onto the crankshaft. then You need a "harmonic balancer" puller, It has slots that bolt to the inner part of the balancer and you screw in the big center bolt. As you tighten the bolt it "pulls" the balancer. Here is a picture;

chuckster57_23.gif

Feb 08, 2011 | 1998 Ford Explorer

1 Answer

Need to pull the harmonic balancer,do i need a puller? and what kind do i need?


In order to remove your harmonic balancer, you will need a harmonic balancer puller. Most harmonic balancer pullers work and look the same. For your specific car it doesn't need a specific one. You can go and pick one up at your local auto parts store. You can either buy it or rent it, depending where you go. Hope this helps.

Aug 27, 2010 | 1997 Mitsubishi Montero Sport

1 Answer

1 want to pull off a harmonic balancer off a oldsmoble cutlass cieras without jumping out or time


if your just pulling it off to change the front seal. all you need to do is remove the belts off of the accs. then remove the bolts out of the balancer and use a puller to remove it. it will stay in time. the timing gear has a key on the crank to hold it in postion.

Mar 11, 2010 | 1990 Oldsmobile Cutlass Ciera

1 Answer

Where exactly is a crank sensor on a 1988 olds. 2.8 v6


should be behind the bottom pulley(harmonic balancer)(crankshaft pulley).You will have to remove the bolt in the pulley first,to do this.You will have to remove the starter or there might be a small shield where the tranny and engine attach.This will give you a way to hold the engine so you can remove the bolt.I use an old main bearing and put in the teeth on flywheel.once bolt out You will have to get a 2 or 3 jaw puller and pull the pulley off.

Feb 19, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

How can i use the harmonic balancer puller for this car what size screws do i need


im not sure wich size bolts you need but if you go to a parts store that has a balancer in stock they can match up the bolts you need. I had the same problem with the same car my puller did not come with the corect bolts to pull it

Jan 03, 2010 | 1992 Oldsmobile Cutlass Ciera

2 Answers

What tool do i need to take off the vibration dampener


Tool is called a harmonic balancer puller. If you use anything else on it you can do damage.

Oct 07, 2009 | 1992 Buick Regal

1 Answer

Harmonic balancer is going out! do you have to pull the motor ?


No. The balancer can be pulled off from the crank with no problem. It's the main pulley on the engine. It has a big bolt at the center that holds the pulley onto the crank, that bolt needs to come off. Then the pulley (harmonic balancer) can come off.

Sep 09, 2009 | 1992 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1992 Oldsmobile Cutlass Ciera Logo

500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...