Question about Chevrolet Cavalier

Open Question

Have you got the torque settings for the head of a Citroen relay s reg

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 58 Answers

SOURCE: cylinder head ford zetec escort p reg

Stage 1 = 15Nm
Stage 2 = 40Nm
Stage 3 = Plus 90 degrees or quarter of a turn. Good tip is to mark all the bolts after initial torque setting with tip-ex , i.e. all to the front of the car. When you finish they should all point towards the timing belt.
This is also a good way to make sure you don't miss one or tighten one twice if you are distracted since it is not a torque setting. New bolts should be used by the way as they are stretch bolts. Timing of cams - remove cam cover and you will see a slot on the end of the cams. Opposite end from belt. You need to slip a piece of 5mm flat bar or a long 5mm allen key into then so that the bar rests on the face of the head. Engine should be a tdc.
cheers John

Posted on Dec 17, 2008

  • 40 Answers

SOURCE: hi i need the torque

hi the cylinderhead torque settings are
STAGE 1, 30Nm (22l bf ft)
STAGE 2, 50Nm ( 337 lb ft ),
STAGE 3, angle tighten another 90 degrees,
STAGE 4 angle tighten another 90 degrees

Cant help you with the cam bearing though sorry

Posted on Jan 07, 2009

  • 31 Answers

SOURCE: do you know the torque settings for the cylinder

Tighten the cylinder head bolts to 85--90 NSm (63--66lb-ft).

moz-screenshot-4.jpg1eec8d8.jpg
moz-screenshot-2.jpgmoz-screenshot-3.jpg

Posted on Nov 17, 2009

Testimonial: "thats great, thanks alot"

mecanica03
  • 874 Answers

SOURCE: in need of torque settings for a porsche boxter

moisten bolts with engineoil,
1st step tighten to 23 ftlb
2dn step loosen all bolts
3rd step tighten to 15 ftlb
4th step add 60 dgrees
5th step add 60 dgrees

Posted on Aug 04, 2010

TDISLine
  • 1874 Answers

SOURCE: need torque settings for cylinder

Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Posted on Dec 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the torque setting for my citreon 1.8 16v cylinder head petrol


If you buy head gasket the setting will be included. I believe you will torque to a given torque then tighten a further angle (probably 120degrees.)

Jan 26, 2015 | 2004 Citroen Xsara Picasso

2 Answers

Citreon xsara 1999 1.8 16 valve cylinder head torque settings


If yours is an Xu series engine, you need to use a torque wrench and an angle dial wrench. Tightening is in 3 stages.
  • Stage 1: Tighten up to 60Nm (44 lb/ft) then fully loosen
  • Stage 2: Tighten up to 20Nm (15lb/ft) change to angle dial wrench
  • Stage 3: Angle tighten to 300 deg.
To avoid confusion, do stage 3 in 3 steps, tighten 100 deg each round and repeating the cycle until 3 rounds.

07718717-6a90-48f5-a87c-bc1ff81d67bd.jpg

04a9b611-4f0b-4da6-9052-a1cb2e517c02.jpg

Jun 13, 2014 | 1998 Citroen Xsara 1.6

1 Answer

Changed the battery on a 53 reg citroen relay van and now the immobiliser light wont go out


make sure you got the same amount amps that you had in the old battery

Oct 05, 2012 | Citroen Cars & Trucks

1 Answer

Whats the torque settings on a Citroen C2 front disk brakes 56 plate


I would go 40-45 FT Pounds and use a drop of LOCKTITE blue.

Jun 26, 2012 | 2006 Citroen C2 1.4

1 Answer

What is the torque settings on degrees or on nm on a citoen c2 1.4 vtr on the cylinder head bolts?


https://www.google.co.uk/search?q=citroen+c2+front+suspension+diagram&ie=UTF-8&oe=UTF-8&hl=en&client=safari Try this link. Gives all torque settings in both nm and ft/ lbs

Mar 11, 2012 | 2004 Citroen C2 VTS

1 Answer

I HAVE AN AUDI A4 TDI X REG, IVE GOT THE CYLINDER HEAD OF. WHAT IS THE HEAD BOLT TORQUE AND IS THERE A SEQUENCE TO TORQUE THEM CHEERS.


Audi A4 1.9 TDI-PD (Pumpe Duse)

Cylinder head tightening sequence:

tdisline_853.jpg
Renew bolts!

Torque settings:
1. Stage 1 = 40 Nm
2. Stage 2 = 60 Nm
3. Stage 3 = 90 Degrees
4. Stage 4 = 90 Degrees

Please do rate my response. Thanks!

Sep 01, 2011 | Audi A4 Cars & Trucks

1 Answer

Need torque settings for cylinder head bolts on a 52 reg skoda fabia 1.4 16v any help much appreciated thanks


Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Dec 17, 2010 | Volkswagen Polo Cars & Trucks

4 Answers

Head bolts torque settings


According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Oct 26, 2008 | 1995 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...