Question about 1992 Toyota Camry V6

1 Answer

How do you install headlight switch on 1992 camry 4 cyl. headlights dont turn on but the blinkers work and if you jiggle the switch the brights will come on but not the low beams.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 14,585 Answers

You have to replace the turnsignal switch. all the exterior lights run thru it.
I believe on that model and year, you have to pull the steering wheel to remove the switch.
You will have to purchase a couple of special, but fairly cheap tools to do the job.
If your up to that then let me know and I can guide you thru it.
Randy

Posted on Nov 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the headlight relay located for a 97 Bonneville?


under the hood on the driver's side, should be another fuse box. ur headlight relay/fuse will be there.

Feb 09, 2013 | Pontiac Cars & Trucks

1 Answer

Does this model use a 4 headlight bright system? I have 2 low beam lights but when I put on the bright lights the 2 low beam lights go out and only the 2 bright lights stay on.


I think that many 1990s and even some 1980s GM vehicles with seemingly 4 headlight systems actually use only 2 at a time.

My 1990 Oldsmobile Cutlass Calais, for instance, had 2 high beams that went on independently of the 2 low beam lights when switched with the turn signal lever.

In the 1970s the GM vehicles had 4 headlight systems where all 4 headlights would go on, but they used sealed beams rather than the capsule lights that are used nowadays.

For instance, our 1976 Cadillac Seville has a 4 headlight system that lights up 4 headlights on the high beam mode.

Good luck on seeing at night with the current set up.

Dec 09, 2010 | 1992 GMC Sierra

1 Answer

Intermittent Headlights '98 Camry


What module are you referring to?
Sounds like your multi function switch is bad. Headlights, high-low, TS all the same switch.

Apr 14, 2009 | 1998 Toyota Camry

2 Answers

Fast Blinker


hi usurally when that happens that means you have a bad bulb or bad wiring.

Feb 05, 2009 | 1999 Toyota Camry

1 Answer

Turn signals


try changing bulbs. check fuse.

Jan 10, 2009 | 1997 Geo Metro

2 Answers

1999 Mazda Miata Headlight Failure


Notice how your headlights are protected under the hood by a suspiciously large rubber cover? Miatas hate humidity and condensation, from head to toe, including the headlights. I lost a headlight, was pulled over by a state trooper who told me to change it, and tested the brights all in one night. Of course, the brights worked, because they are actuated from a different circuit on the wiring harness that connects to the headlight through that massive rubber seal. If any amount of humidity or condensation has occurred, especially during a weather change, I cannot stress that enough, the first thing to fail is the normal headlight setting. I was already going to switch over to high-intensity bulbs, so I had a good excuse to crack open the headlight assembly (otherwise I wouldn't dare--Miata headlights are nearly impossible to change with a large pair of hands). I separated the old bulbs from their wires and proceeded to clean the connectors of the wires with an approved electrical connection cleaning solution (go to AutoZone). I then applied the conducting gel to the bulb to avoid corrosion and secure against future problems with condensation and was good to go. Make sure to give yourself many many hours to decipher the bulb assembly, as it was designed by someone whose sole intent is to make the job 150 times more difficult. Otherwise, cleaning the wiring assembly is a cinch.

Jul 15, 2008 | 1999 Mazda MX-5 Miata

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...