Question about 2007 Toyota Tacoma

1 Answer

How do you replace a right front wheel bearing on a 2007 toyota tacoma sr5 v-6 4x4

Posted by on

  • Anonymous Mar 21, 2014

    4x4 front right side

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 14,585 Answers

Remove the tire
Remove the caliper- two bolts in back, could be torx or allen
remove the bracket that holds the caliper- two bolts in back
remove the rotor, with hammer if nessissary
remove the big nut holding the shaft in the middle of bearing
there are three or four bolts that are in back that hold the bearing on the spindle remove these
use a screw driver and chisel to pry the bearing out of the spindle, you will have too beat on them so use an old screw driver. If the new bearing comes with the hub, then you can beat on the hub and knock it out. be careful because your limited on space and it is easy to hit something that you don't want to hit. If the new bearing doesn't come with the hub, you will have to have it pressed out and in. about twenty bucks at a garage.
Good luck
Randy

Posted on Nov 09, 2010

  • Tina Outlaw Jun 18, 2013

    after installing the hub it's making a noise what can i do?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 Toyota 4 runner 2 wd front wheel removal


Install front wheel bearing hub assembly on a ... - YouTube

? 8:42
https://www.youtube.com/watch?v=LQ-DGdt2J2U
Mar 11, 2014 - Uploaded by Andy Taylor
... Install front wheel bearing hub assembly on a 2003-2014Toyota 4Runner .... Pressing a 2005 and up Toyota Tacoma,4Runner, FJ Cruiser 2WD or 4WD ... How to Remove & Replace a Toyota 4x4 Manual Locking Hub ...
images for 99 Toyota 4 runner 2 wd front wheel removal

Nov 26, 2015 | Toyota Cars & Trucks

1 Answer

Wheel bearing


If grinding noise is heard coming from front side, lift up both the front wheels and rotate the wheels one by one to listen to the sound, if any. If a noise is heard, replace the front wheel bearings as a set.
If the front wheels do not produce any abnormal noise when rotated, lift down the front vehicle. Lock the front wheels with blocks, release the hand brake. lift up the rear wheels and try to listen to the abnormal noise. If the noise is heard, replace the differential bearings and seals. Top up the differential oil to the mark.

Dec 12, 2013 | 1998 Toyota Tacoma

1 Answer

2007 Toyota Tacoma 4 wheel drive double cab.....how to change front wheel bearings


I work in an auto repair shop, these are one of the nastiest job I've ever seen done take it to a shop-you do not want to tackle this-Denny

Nov 03, 2013 | 1999 Toyota RAV4

1 Answer

If my Toyota Tacoma front wheel spins and needs grease where do I put it and what kind of grease? Is it in the hog head?


If you get a grinding sound from the bearing when the wheel is off the ground and spinning the you DO NOT grease it...there is no zerk (grease fitting), You have a bad wheel bearing and you must either change the bearing or change the entire wheel hub assembly. Good luck.

Nov 01, 2013 | 2001 Toyota Tacoma

1 Answer

2007 toyota tacoma replace front wheel bearing prerunner


The other guys have never taken the wheel bearings out of a 2007 Tacoma! Remove the tire (duh)
Remove the 12mm bolt holding the brake line securing bracket
Un-clip the air sensor hose clip
Remove the two 17mm bolts holding the brake assembly on the back side
Remove the rotor from the wheel "spindle"- slides right off.
Unscrew the four metric bolts (maybe 17mm) holding the wheel housing to its mount (they cannot be removed from the assembly yet, see below).
That's right there is no normal wheel spindle with a big nut on the end of a threaded shaft in the middle!
The wheel mounting plate (with the 6 studs) is pressed into the bearing housing.
Get a replacement bearing assembly and take it and your old unit to a machine shop (unless you have a good press).
An easy job, just expensive- $140 for the bearing assembly.

Mar 27, 2012 | 2007 Toyota Tacoma

1 Answer

Replacing front struts on a 2007 toyota tacoma


REALLY HARD PROJECT, TAKE IT TO SEARS, IT WILL ALSO NEED FRONT ALLIGNMENT

Jul 25, 2010 | 2007 Toyota Tacoma

3 Answers

How do you get to the front wheel bearings on a 1999 toyota tacoma so that i can grease them?


For the most part it is very similar to doing a brake job, you will need to gain access to disc area. once you have removed the caliper you will need to remove the dust cap, this will allow you to remove the nut that secures the disc to the spindle. after you access to the front bearing, remove and set aside, put washer and nut back on, slide rotor out tapping it to remove rear bearing, remove nut/washer and hand pack with wheel bearing grease. re assemble, check and bleed brakes if necessary, Good Luck!
imgres.jpg

Sep 13, 2009 | 1999 Toyota Tacoma PreRunner

1 Answer

My tacoma makes a loud roaring noise while I am driving. (Changed tires already still happens) Worse when I turn the wheels toward the passenger (right) Gets bette when I turn left. Constant while going...


have your wheel bearings checked out. sounds like a wheel bearing going bad, if you said it gets worse when turning right have your left wheel bearings checked for wear. weight transfer will put more strain on the bearings and make them louder.

Aug 16, 2009 | 2003 Toyota Tacoma

1 Answer

2005 Toyota Tacoma


Without looking at it, you may have one or more of the following:

Rust on the inside edge of the rotor (most common)

Worn front brake pads

Front wheel bearing problem.

Backing plate (behind rotor) rubbing the rotor

These are the most common causes, you can see 1,2 & 4 with the wheel off.

Hope this helps.

Aug 15, 2008 | 2005 Toyota Tacoma

Not finding what you are looking for?
Cars & Trucks Logo

1,237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...