Question about 2002 Pontiac Grand Am

1 Answer

I have a 2002 pontiac grand am and there is a constant clicking coming from the hazard switch. I just replaced the switch, part number, old one 22624799 with a new one ac delco part number 10359039. it is still constantly clicking, is there something else that could be wrong, thank you for your time.. RJ

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 14,585 Answers

You have a bad multifunction switch ie. turn signal switch. poor design. easy to replace.
remove the cover off the steering column- three or four screws from bottom
two or three screws hold the turn signal switch, plus two plugs
when installing watch to make sure you get the horn button pushed back in the switch, as not to bend anything.
Good luck
Randy

Posted on Nov 09, 2010

Testimonial: "Thank you I did this and cleaned the copper contact and so far its quiet,, Thanks again"

  • d_dowding Nov 12, 2010

    mine is doing the same thing. Could this also cause a problem with gages acting funny and sometimes not working after startup.

  • Randy Ohler Nov 12, 2010

    No this will not affect the guages, you most likely have a bad connection at the instrument panel. thes are not hard to get out. If you feel up to it let me know and I will help
    Randy

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Pontiac Grand Am turn signals not working. Could this be a fuse?


None work , left , right , front or back ? Check TURN LPS fuse C 10 Amp -in Left instrument fuse panel ! More then likely it's the switch on the steering column or the hazard switch , power for turn signals come from the hazard switch !
Fuse Block - Left I/P- On the left side of the I/P

May 27, 2015 | 2002 Pontiac Grand Am

1 Answer

Hazzard switch changed still hear clicking


Maybe the flasher unit under dash is bad, shorting out. Do the hazards work at all?

Jan 31, 2012 | 2002 Pontiac Grand Am

2 Answers

Where would i find the signal flasher in my 2002 pontiac grand am


the flasher is built into the hazard switch on these cars remove the bezel around the radio remove the 3 screws holding in the hazard switch remove from behind and unplug your done then dealer sells these for around 28 bucks give or takte hope this helps

Sep 14, 2010 | 2002 Pontiac Grand Am

1 Answer

Makes a constant or intermitten blinking noise even after blinkers are off - have already replaced hazard relay switch


The usual problem is the hazard switch itself.This will usually take care of the problem.If it does not then the only other thing is the multifunction switch.Which is the turn signal switch.Hope this helps.Good luck.

Jun 27, 2010 | 2004 Pontiac Grand Am

2 Answers

My 2004 pontiac grand am is clicking from hazard switch


Have you checked the flasher relay. It may need to be inserted good or replaced.

Feb 26, 2010 | 2004 Pontiac Grand Am

2 Answers

Clicking from hazard switch 2002 grand am


I have a 2002 also and I got a service letter in the mail in 2006, saying that there is an issue with the hazard switch. Call your Dealers Service Center and they should take care of it for you at no cost. I am taking mine in next week for the same issue and also the front rotors are warped again (after the 2nd set of rotors have been put on) and there is a service letter on that also (nov 08).

Good luck.

Aug 03, 2009 | 2002 Pontiac Grand Am

1 Answer

2002 GA Next step


no the clicking is just the relay thats inside the hazard warning switch in the dash its just something you are going to have to get use to

Jul 03, 2009 | 2002 Pontiac Grand Am

2 Answers

Clicking when signal light is not on.


You have a bad hazard flash switch (your 4 way flasher) you have a short inside the switch ,very common you will need to replace it to stop the problem

Jun 05, 2009 | 2004 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...