Question about 2005 Chevrolet Colorado

2 Answers

2005 chevy colorado four wheel drive truck willnot go into 4 wheel drive hi or low lite blinks and goes back to 2 wheel

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi,before you can make any repairs on your car, you have to start from the blinking light. The flashing/blinking lights indicate a fault code is stored in the drive train control module. Retrieving the code will pinpoint the malfunctioning component which will inturn fix the four wheel drive problem. You have to scan your car with a OBD II scanner if you have one or take it to any auto zone near you to have it scanned for free and a code will be retrieve and interpreted to pinpoint and fix the problem....

Posted on Nov 09, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 2005 colorado it won't go in four wheel drive in cold weather but works fine in warm weather... When u do hit the four wheel button in cold weather it shows in four wheel drive but it's not.. We had some sixty degree weather Saturday and it worked fine

Posted on Mar 03, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy blazer 2005 zr2 will not go into the 4X4 option either hi / lo or auto 4X4 press the button into each one and all it does is keep blinking and will not engage into 4 wheel drive


under your batt tray needs removed youll find a rubber hose goin to a vacume canastersee that it aint cracked or got a hole

Oct 27, 2012 | Cars & Trucks

2 Answers

My 1999 chevy silverado 1500 four wheel drive won't engage. The truck is in 2wd now. When I push 4wd hi or low, I can hear the actuator try to engage the four wheel drive. The four hi or low button will...


You probably have a bad encoder motor.It is located on the side of the transfer case on the drivers side.It is black.The other problem they had with these was the switch but you have already replaced this so your next thing is the encoder motor.Hope this helps.Good luck.

Dec 28, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Trannie, no drive no od,no 2 will go in r low 1


if you drove it too far too fast in 4 wheel low. you could have done some serious damage to the trani. i have the same truck in a 1998 and the tachomiter goes nuts at 15 mph in 4 low. it was never meant to drive for any distance in 4 low. if your lucky. when your rearend went it didn't take out your drive shaft. if your not lucky. your drive shaft took some punishment and in turn damaged the trani.

Oct 07, 2009 | 1991 Chevrolet C1500

1 Answer

Four wheel drive lite is blinking and wont go out


Hi, You will need to take to mitsubishi dealer and have them scan your diagnostics. But this is a common thing in montero's and it sounds like o ring (which is plastic) in transfer case has busted. As long as it switches in and out of 4 wheel drive it is ok to drive. If it doesn't, dont drive it...it could cause alot of damage.

Jul 12, 2009 | 2001 Mitsubishi Montero Sport 4WD

1 Answer

1999 Chevy Suburban wont kick into four wheel drive


if it is electronic there is probably something wrong with the wiring..

but if it is manual...it might be the actuator........



Feb 11, 2009 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

Four wheel drive in cold


It is due to the cold weather,The fluid is to thick when cold for the actuator to engage the 4wd.

Please rate this solution.

Jan 16, 2009 | 2007 Chevrolet Colorado (Extended Cab) New...

2 Answers

I have a 2005 Colorado, my niece saw the buttons with 2 and 4 and started pressing them before I realized what she was doing. Now my truck only functions in 4 wheel drive, and the lights for that function...


first check too see if a fuse is blown, if not then disconnect the battery for 10 min too reset the computor!!!!
if that doesnt help take it too auto zone for a free scan!!!

Jan 15, 2009 | 2005 Chevrolet Colorado

3 Answers

Wont swictch back into 2 wheel drive from 4 wheel hi


you could have a split vaccume line goin to the actuater switch that operats the 4 wheel drive under neath the battery box.

Dec 17, 2008 | 1999 Chevrolet Blazer

1 Answer

Four wheel drive engages from 2 hi to 4 hi on its own whe driving


I had this problem also, disconnect the battery a leave it for a while, this reset it,
only draw back somtimes it will reset idle also and vehicle will stall, to fix this just let it sit idling
for a bit and it will relearn the settings

Sep 29, 2008 | 2001 GMC Jimmy

Not finding what you are looking for?
2005 Chevrolet Colorado Logo

Related Topics:

626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...