Question about 2001 GMC Yukon XL

3 Answers

My Son's ran our 2001 Yukon out of gas. After refilling it still will not start is their a reset switch or a trick like the oil change light?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 2,422 Answers

There is on reset that im aware of there is a relay its eighter on the fire wall or there may be a removeable panal in side the glove boxand its behind that But some times if you run an older fuel pump dry thats enough to finish it off check to see if you have any fuel out put from the pump or try to listen to hear if it makes any noise when the key is on Then at least you;ll know if the relay is good or not good luck

Posted on Nov 09, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I encountered the same problem with a '99 Silverado. Turns out that the fuel pump had burned up, as it uses gasoline to keep cool. Huge pain in the **** for your Yukon, as you have to remove the gas tank to replace the fuel pump. Run the appropriate pressure test to determine if the fuel pump is staying pressured up and proceed accordingly.

Posted on Nov 09, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 279 Answers

The fuel pump should have brought fuel up to the engine almost straight away.I have a feeling that you should get the fuel pressure checked at the rail.I think when your son ran out of gas he might have burned the fuel pump out.The lubrication and cooling for the pump is actually provided by the fuel itself.I think you're looking at a trip to the service centre.Good Luck

Posted on Nov 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

7 Answers

How do I rest oil change light on a 2001 1500 silveradeo?


Place a piece of black electrical tape over it ,problem solved .you know the oil is good

Oct 10, 2014 | 2001 Chevrolet Silverado 1500

1 Answer

2001 monte carlo keeps saying change oil after i changed it already


Reset oil change light. some GM cars and trucks switch on ignition, do not start engine press gas peddle to the floor then release and switch ignition off. This procedure is in the owners manual.

Feb 15, 2014 | 2004 Chevrolet Monte Carlo

2 Answers

Reset service light 2001 yukon


the answers above do not work. batter cable off does not work. that turn on 5 pedal thing is BS. also some a holes online are saying undo the fuse cover under the steering wheel and and unplug the ECU - well the fuse panel is not under the wheel, it's on the drv side of the dash. AND even when you pull that there is nothing called a ecu. funny hu. there is not a ECU fuse in the under hood fuse box either. service engine soon light is STILL ON. It was flicked on from the air breather intake being loose. that has been fixed. gas caps on tight. engine oils been changed.

Mar 18, 2012 | 2001 GMC Yukon Denali

1 Answer

How do you reset oilchange light on a 2001 yukon xl


turn key to on position, pump gas pedal to floor 5 times and turn off key. start vehilce. Change oil light should flash for 7 seconds and then go out.

May 15, 2010 | 2001 GMC Yukon XL

1 Answer

HOW DO I RESET THE CHANGE OIL LIGHT ONCE THE OIL


look in the manual......turn the ignition to the on position not starting it of course and then pump the gas petal 5 times then the light will blink a few times turn off then back on...problem solved

Jan 30, 2010 | 2002 GMC Yukon Denali

2 Answers

My jaguar s-type won't start after all the oil ran out. We refilled it but it won't start. Is there a safety switch


but their is an oil cut off switch or so iam informed ,if you lost oil with the engine running then the oil light switch cuts the engine off ,dealer only to reset

Dec 24, 2009 | 2001 Jaguar S-Type

1 Answer

My son ran my truck out of gas. Its a 1988 F250


first, is this a diesel? if it is there is a line or oring loose allowing it to **** air--diesels dont like leaks like that and there is a whole procedure for voiding the air from the lines on diesels. next could be the in tank pump and also does it have duel tanks? does the duel tank switch work? running out of fuel with in tank pumps can burn up the pump (the fuel itself provides lubrication and cooling for the pump, gas or diesel) and of course check the filter, running out and refilling could have disturbed trash in the tank

Oct 26, 2009 | 1988 Ford F 250

2 Answers

Ran out of gas and my 2001 gmc yukon xl and it won't start now.


change your fuel filter when you get low on gas if there is trash in the tank it will wind up in your filter i would start there

Aug 07, 2009 | 2001 GMC Yukon XL

1 Answer

The engine light always come on after an oil


Does it come on just when you first start it up after the oil change. Does it stay on for Miles? If it comes on just for a few mint.s right after the change, it has to do with the oil press safety. You install a new filter and as the engine starts it will have to refill the oil filter with oil, plus refill all the oil ports in the block to finely build press to shut off the press safety switch, which will the turn off the light.

Jul 07, 2009 | 2001 Kia Sephia

Not finding what you are looking for?
2001 GMC Yukon XL Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...