Question about 1998 Mercury Mystique

1 Answer

Brake lights not working. bulbs are good. brake light switch working correctly. turn signals & tail lights work correctly. The third brake light is working correctly also...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Better get a second look at the brake light switch, there might be two, third brake light is on a different circuit, switch light circuit goes to signal switch then brake lights

Posted on Nov 09, 2010

  • sassynwenchy Jul 18, 2011

    There is a short in the wiring harness that is connected to the the brake light switch and the cruze control. The best solution is to replace this harness. You will have to go to a junk yard to get this piece. The brake light/cruze control switch is attached to your brake pedal.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Tail lights work but not brake lights 93 toyota camry


The brake light side of the bulbs is powered by the brake switch and travels thru the turn signal switch.
If the third brake light works, I would guess the problem is in the turn signal switch.

Jul 02, 2012 | 1993 Toyota Camry

1 Answer

2001 Town & country brake lights not working, but the third brake light and tail lights are working. I also just replaced the brake light switch thinking it was the problem, but it wasnt


I think the brake light and turn signal are on the same bulb on these, correct?

If so do the turn signals work?

If they do than I would bet that the turn signal switch itself is the problem. The power for the brake lights is routed through the switch (except for the third brake light that is supplied power directly form the brake switch). The turn signal switch will interrupt power from the brake switch and supply power from the turn signal flasher depending on if the right or left turn signal is engaged.

Sometimes wiggleing the lever or pushing the four way flasher button with the brake pedal depressed will intermittantly cuase the brake lights to work. If this is the case than it is the turn signal switch that is causing the problem.

Feb 11, 2011 | Chrysler Town & Country Cars & Trucks

1 Answer

Sent an email earlier before I finished the situation. 2000 Pontiac Grand Prix GT. Brake lights will not work. I have replaced all bulbs, running lights work, third brake light in window works, turn...


has to be somwhere in the wiring for the tail lamp brk light. if the high mount works the switch is good. did you put the correct bulbs in? they may share a common ground independant of the other lights.

Nov 19, 2010 | 2000 Pontiac Grand Prix

2 Answers

Rear turn signals and brake lights out. Front signals and rear tail lights work fine.


the brake lights and the rear turn signals should be the same bulb check the bulbs to make sure they are not blown does your third brake light work if all brake light are out and the bulbs are good check the brake light switch on the brake pedal

Nov 04, 2009 | 1986 GMC C1500

7 Answers

1996 Chev Silverado K3500 dually, no brake lights


Check at the light socket in the rear, where your lights don't work. You need a test light or a voltage meter, and check to see that you have a groun there, power for your parking light, and power to the brake light. You should have power for the parking lights seeing that it works, and a ground. Just verify that your power for the brakes is getting to the bulb, or not. Just a good place to start.
And you are correct that if the third brake light works (top) your brake light switch is fine.

Aug 19, 2009 | 1996 Chevrolet C3500

1 Answer

1995 cutlass ciera stop light and third light don't work


THE 3RD BRAKE LIGHT DOES NOT GO THROUGH THE TURN SIGNAL SWITCH.ASSUMING THE 3RD BRAKE LIGHT BULB IS GOOD.U SHOULD CHECK THE BRAKE LIGHT SWITCH ON THE BEAKE PEDAL.SHOULD BE POWER GOING IN & POWER OUT WHEN U ARE IN THE BRAKE

May 13, 2009 | 1995 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1998 Mercury Mystique Logo

1,001 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

fordexpert

Level 3 Expert

5474 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...