My daughter ran the battery down on our 98 V70 and had to get
boosted. Of course the radio showed "CODE".
She tried a few different codes and failed to get it to switch on. It
now reads "OFF" and when I enter the correct code nothing happens.
Is this something I can fix myself? Hate to waste all the time and $
going to the dealer to re-program or whatever.
Inno D. (Toronto)
I,have the same problem,my radio read only off and now I,have the code but nothing happens.
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: 98 V70 Radio Code Problem
Sorry to say this but you may need to bring it to the dealer then have it re-program by them so everything will be working fine and they can also check the settings on it that will save time for you but unfortunately you need to pay.
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
look it up on line by enterint the car make and model in the search engine and following the areas having to do with electrical audio or stereo..you may find your answer there..or look in car stereo specs it should show up...
These radio codes are not presented in radio for safety purpose and only your Volvo dealer can tell you these codes on producing the proof of ownership. These codes are generated based on your VIN number.
After using the codes if it says "ERR" do not try anything else further. Remove the radio and take it to the dealer or you can write down the letters and numbers from the top of the radio and the dealer will get you the radio code with the help of those numbers.
The only way this is possible if you contact a Volvo dealer and give them the ownership details of your vehicle. But this will only work if it is a factory fitted radio. If it is aftermarket you may have to contact the person or dealer you purchased it from for the code. Check your owners manual it may have the code in there..hope this helps, let me know how you get on.
My husband had the same issue with not knowing the code (we bought the car used, never given the code). If you remove the radio, it should be printed on top. Odd, I know, but that is where his was located.
Your radio is now in "off" mode. To get it back to "code" mode you need to have power to the radio for 2 hours. This can be accomplished by either driving the car for 2 hours, or putting the key into position 1 on the ignition, but make sure to turn off the fan as it will drain the battery in 2 hours. Once you have "code" back you can enter the 4 digit radio code. Caution, many of these radios have been replaced so the code that the dealer gives you may be wrong. If entered and it comes back "EEEEEE" that means it is the wrong code. The radio must be pulled and get the factory serial number from the top of the unit.
Your info is correct about what to do when it reads "OFF". As far as I know, you need to go to a dealer to get the code. They access it through their computer system with the VIN and the radio serial #.