Question about 1991 Dodge Ram 150

1 Answer

When I turn on my lights, my headlights will not work. I have to hold the bright switch on in order to have lights. Marker, tail, turn signals, and brake lights still work. What would cause this to happen?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Dodge Master
  • 2,007 Answers

You will have to change the headlight dimmer switch assembly. It's 28 bucks at auto parts warehouse, or if you have a good auto wrecker Replacement Switch Assembly when I turn on my - arbd505801.jpg COMBINATION HIGH AND LOW BEAM DIMMER, TURN SIGNAL, WIPER, HAZARD WARNING AND WINDSHIELD WASHER FLUID SWITCH -- Switch controls the high and low beam dimmer, turn signals, wipers, hazard warning, and windshield washer fluid; A high quality, direct fit OE replacement combination switch. near by, that would work too.

Posted on Nov 09, 2010

  • brittany moore Nov 23, 2011

    Was this problem ever fixed? I'm having the same issue with my 1994 gmc jimmy. Except I am not able to turn the lights on at all holding the bright swtich. Would I need a headlight dimmer switch assembly also?

  • romantical22
    romantical22 Dec 20, 2012

    im having the sam problem with my 1995 dodge neon changed the fuses changed the bulb changed the switch relay what else could be wrong???

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2007 Chevy HHR..the tail light don't work the bulbs workI have turn signals and brake lights..no owners manual in car. check fuses can't locate the fuse for tail light is there another place


Your talking about the rear park lamps, but, do the front park lamps work?
Note the picture.
Underhood fuse box, 68 is park lamp relay, 69 is park lamp fuse.
26139691-ogmtu0xiyqttvnd1jjcu4dmt-2-0.jpg

Mar 23, 2016 | Cars & Trucks

3 Answers

Why the brake light works and tail light don't work Chevrolet avalanche 2003


they are dual filament bulbs so the tail light filament might have blown and not the stop light , replace the bulb to check

Jul 18, 2014 | 2003 Chevrolet Avalanche

1 Answer

Tail lights not working


All of the marker and tail lights are powered from a 15amp fuse going thru the headlight switch on a brown wire. Do you have power from that circuit coming out of the headlight switch ?

Jan 25, 2014 | Mercury Cars & Trucks

1 Answer

1982 chevrolet S10 Only headlights come one with


Voltage for the tail lamps shows to be a brown wire. Use a test light, check that wire for voltage, headlamp switch on. If voltage then check black ground wire.
A problem with grounds will cause some weird things to happen. Ground wires are black. You can use a test light to check ground, one end of testlight comes from battery voltage, the other end you touch ground, black wire, you have to penetrate the insulation. If the lite comes on, at least the ground is good enough for the test light.
At the moment, I don't care about the maker lamps. I do care about tail--stop--turn--tag lamp. In the past, I have been stopped because of no tag light.
Just my opinion.https://s9.postimg.org/af5e5kqtb/tail_lamps.jpg
Click on the link, hope you can read it.

May 30, 2017 | Chevrolet S 10 Cars & Trucks

1 Answer

2000 elantra dash lights dont work. left tail light and front marker light dont work


something between your lights and accessories (a wire) were crossed and it burnt out the wire. check your wires again, go to a website for your vehicle and see if you can find a wire diagram of your vehicle.

Apr 19, 2013 | 2000 Hyundai Elantra

1 Answer

1994 Grand Marquis, marker, tail and dash lights not working. Brake and turn signals work, fuses are all good, checked them all. Worked on passenger side door window, removed door panel, don't think this...


Your light switch is bad. The switch controls what you listed plus headlights,obviously. I've had this problem before. headlights would be on, but nothing else.

Feb 25, 2011 | 1994 Mercury Grand Marquis

1 Answer

2001 F-250 SUPER DUTY TAIL LIGHTS WIRING DIAGRAM


THE TAIL/MARKER LIGHTS, GO FROM THE HEADLIGHT SWITCH TO THE REAR FOR THE TAIL LIGHTS & TO THE FRONT FOR PARKING OR RUNNING LIGHTS. ALL THOSE LIGHTS ARE ON THE SAME CIRCUIT, { BROWN WIRE } THE BRAKE & TURN SIGNAL WIRES GO FROM THE STOP LIGHT SWITCH & FROM THE TURN SIGNAL/HAZARD SWITCH. NO RELAY IN THE TAIL/PARK CIRCUIT. CHECK THE FUSES WITH A GOOD FUSE TESTER.

Jan 15, 2011 | 2001 Ford F250 Super Duty Super Cab

1 Answer

98 Explorer's Headlights won't work...have to hold highbeam on


Sounds like your switch is bad (i.e. turn signal / healight dimmer / winshield lever switch) inside the steering column. Replace as necessary.

Apr 07, 2009 | 1995 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...