Question about 2002 Chevrolet Astro

2 Answers

Headlights not working.

The low beams on my astro do not work. The high beams do. So I am looking for some answers or ideas as to what can be wrong. The daytime running lights do work.

Posted by on

  • lcmc Jul 07, 2008

    Okay, I checked the relay switch and it works fine. I also checked the fuses and the lights. I just haven't tried the headlight switch. The high/low switch works fine.

    I tried to put different bulbs in, but that did nothing. I appreciate all the tips given. Thank you!

  • Donna_Gene Nov 23, 2008

    Hi, my low beam headlights aren't working my other lights all work, I have checked fuses new lights and even a new turn signal switch still no low beam headlights, help!!!!



2 Answers

It turned out to be the multifunction switch! Now it works, thank the Lord. I didn't have any junkyards near here so I had to buy it new. The dealer's price was $385. I got it from a local auto parts supply store for $254.

Posted on Aug 14, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 239 Answers

The head light switch is a good place to start. and also the high low switch. Hope that helps you out. If not get back we can do some more trouble shooting OK Thanks Bear001
. There is also a relay for them under the hood in a relay fuse box you can check them to if your switch is ok .

Posted on Jun 17, 2008

  • bear001 Jul 07, 2008

    Hello Icmc

    I see you have tried everything but the switch In My Opinion It is more than likely the Switch. Can you get one from a junkyard or someone? May be they have one you can try, And see if it solves your Problem. Just trying to save you some cash. I hope that works I am sure it will, But if It don't get back to me I'll see what I can do to help you out, I am sure there is a few more tricks we can try out if that switch does not solve it. Ok thanks bear001



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

While low beams on the left high beams stays on dim light but wen I turn high beams on they work fine

It could be driving lights mode instead of low beam. Check connections.

Jun 16, 2017 | Cars & Trucks

1 Answer

2004 envoy xuv low beams dont work switched fuses 45 and 46 still nothing any ideas

Other possibilities are; the bulbs themselves, burnt or corroded bulb sockets, or a bad headlight selector switch.

Dec 11, 2011 | 2004 GMC Envoy

1 Answer

2001 Ford Focus - High beam / low beam problem with headlights

just replace the dimmer switch under the column its wore out on the low beam side

Jan 17, 2010 | 2005 Ford Focus

2 Answers

Low beams and daytime runners do not work. High beams work. Any ideas?

headlights have burned out on the low beam side, replace both headlights, should fix your problem

Jul 08, 2009 | 2006 Chevrolet Trailblazer Ext

1 Answer

Headlights wont work

Fuse 22 and fuse 23 are left and right low beam headlamp fuses located in the PDC. 23 and 24 are high beam fuses. There is also a low beam and a high beam relay in PDC as well. If no headlights work I would check for main switch or multifuction switch (wiper/high beam) since each light has its own fuse and relay.

Jun 05, 2009 | 1997 Dodge Caravan

1 Answer

Low beams don't work

there is two things that could be wrong .. check under the hood for your power distribution box .. its black and 3 inches wide and about 8 inches long .. this contains your relays. and some fuses. on the inside of the lid it tells which one is which.. look for low beam relay .. if it is ok check your low beam bulbs and make sure they arent burnt out.. these two things should fix your problem .. or at least one of these should .. holler if you need more. Jerry

Apr 29, 2009 | 2003 Chevrolet Suburban 1500

1 Answer

1998 cavalier headlights will not work. low or

check wiring in the front bumper for corrosion big problem relating to cavalier and sunfire

Mar 14, 2009 | 1998 Chevrolet Cavalier

1 Answer

Dynasty headlights

it is ur switch that changes it from low beam to high beam
[ turn singnal switch]

Feb 15, 2009 | 1990 Dodge Dynasty

3 Answers

My head lights only work on high beam. if i switch to low they will cut off. all of my dash lights work regardless. any ideas of what may be causing it???

It is entirely possible for both low beams to be out have you verified that there is No voltage on the low beam electrical circuit of the headlights?

Aug 13, 2008 | 2001 Toyota Tacoma

1 Answer

1999 Chevrolet Astro Van problem

the head lights have tree wires goig to it one groun one gets power when high beams on the 3rd gets power only with low beam on test the wires or try by plugin a good known head light to conector if it works with low beam then replace both head ligts because head light come with two bulbs in one high and low

Jun 02, 2008 | 1999 Chevrolet Astro

Not finding what you are looking for?
2002 Chevrolet Astro Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides